EN 61300-3-17:1999

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules

Describes the methods to measure the endface angle of flat or convex angle-polished ferrule.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren - Teil 3-17: Untersuchungen und Messungen - Anschliffwinkel schräg polierter Stifte

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-17: Examens et mesures - Angle de la face terminale des embouts polis angulairement

Définit des méthodes permettant de mesurer l'angle de la face terminale des embouts polis angulairement, convexes ou plats.

Fibre optic interconnecting devices and passive componets - Basic test and mesurement procedure - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules (IEC 61300-3-17:1999)

General Information

• Status: Withdrawn
• Publication Date: 28-Oct-1999
• Withdrawal Date: 30-Sep-2002
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Ref Project: SIST EN 61300-3-17:2001 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules

Relations

• Replaces: EN 61300-3-17:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-17:2001
01-februar-2001
1DGRPHãþD
SIST EN 61300-3-17:1999
Fibre optic interconnecting devices and passive componets - Basic test and
mesurement procedure - Part 3-17: Examinations and measurements - Endface
angle of angle-polished ferrules (IEC 61300-3-17:1999)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 3-17: Examinations and measurements - Endface angle
of angle-polished ferrules
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 3-17: Untersuchungen und Messungen - Anschliffwinkel schräg
polierter Stifte
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 3-17: Examens et mesures - Angle de la
face terminale des embouts polis angulairement
Ta slovenski standard je istoveten z: EN 61300-3-17:1999
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-17:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

NORME CEI
INTERNATIONALE IEC
61300-3-17
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1999-09
Dispositifs d'interconnexion et composants
passifs à fibres optiques –
Méthodes fondamentales d'essais
et de mesures –
Partie 3-17:
Examens et mesures – Angle de la face terminale
des embouts polis angulairement
Fibre optic interconnecting devices and
passive components – Basic test and
measurement procedures –
Part 3-17:
Examinations and measurements –
Endface angle of angle-polished ferrules
 IEC 1999 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
P
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 2 ----------------------

61300-3-17 © IEC:1999 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 General.9
1.1 Scope and object . 9
1.2 Normative references.9
2 General description. 9
2.1 Method 1 – Automatic interferometric method. 11
2.2 Method 2 – Manual interferometric method . 13
2.3 Method 3 – Mechanical profilometer method. 13
2.4 Method 4 – Reflected light method . 15
3 Apparatus.17
3.1 Method 1 – Automatic interferometric method. 17
3.2 Method 2 – Manual interferometric method . 17
3.3 Method 3 – Mechanical profilometer method. 19
3.4 Method 4 – Reflected light method . 21
4 Procedure.21
4.1 Method 1 – Automatic interferometric method. 21
4.2 Method 2 – Manual interferometric method . 23
4.3 Method 3 – Mechanical profilometer method. 23
4.4 Method 4 – Reflected light method . 29
5 Details to be specified .
...