Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres

Describes methods to measure the endface angle of flat or convex angle-polished optical fibres. The primary attributes addressed include endface angle, key angle and radius of curvature.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-37: Untersuchungen und Messungen - Endflächenwinkel schräg polierter optischer Fasern

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-37: Examens et mesures - Angle d'extrémité des fibres optiques à polissage d'angle

Décrit les méthodes de mesure de l'angle de l'extrémité des fibres optiques à polissage d'angle plat ou convexe. Les attributs essentiels concernent l'angle d'extrémité, l'angle clé et le rayon de courbure.

Naprave za medsebojno povezovanje optičnih kablov in pasivne komponente – Osnovni preskusni in merilni postopki – 3-37. del: Pregledi in meritve – Kot poliranja konca kotno poliranih optičnih vlaken (IEC 61300-3-37:2005)

General Information

Status
Published
Publication Date
14-Jul-2005
Withdrawal Date
31-May-2008
Current Stage
6060 - Document made available - Publishing
Start Date
15-Jul-2005
Completion Date
15-Jul-2005

Buy Standard

Standard
EN 61300-3-37:2006
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 61300-3-37:2006

STANDARD
marec 2006
Naprave za medsebojno povezovanje optičnih kablov in pasivne komponente
– Osnovni preskusni in merilni postopki – 3-37. del: Pregledi in meritve – Kot
poliranja konca kotno poliranih optičnih vlaken (IEC 61300-3-37:2005)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-37: Examinations and measurements - Endface
angle of angle-polished optical fibres (IEC 61300-3-37:2005)
ICS 33.180.20 Referenčna številka
SIST EN 61300-3-37:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61300-3-37
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2005

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components –
Basic test and measurement procedures
Part 3-37: Examinations and measurements –
Endface angle of angle-polished optical fibres
(IEC 61300-3-37:2005)


Dispositifs d'interconnexion et Lichtwellenleiter - Verbindungselemente
composants passifs à fibres optiques - und passive Bauteile –
Méthodes fondamentales d'essais Grundlegende Prüf- und Messverfahren
et de mesures Teil 3-37: Untersuchungen und
Partie 3-37: Examens et mesures – Messungen –
Angle d'extrémité des fibres optiques Endflächenwinkel schräg polierter
à polissage d'angle optischer Fasern
(CEI 61300-3-37:2005) (IEC 61300-3-37:2005)


This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61300-3-37:2005 E

---------------------- Page: 2 ----------------------

EN 61300-3-37:2005 - 2 -
Foreword
The text of document 86B/2106/FDIS, future edition 1 of IEC 61300-3-37, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-37 on 2005-06-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-3-37:2005 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300-1 NOTE Harmonized as EN 61300-1:2003 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-3-37:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61300-3-17 - Fibre optic interconnecting devices and EN 61300-3-17 1999
passive components - Basic test and
measurement procedures
Part 3-17: Examinations and
measurements - Endface angle of angle-
polished ferrules

1) 2)
IEC 61754-19 -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.