EN 60684-1:2003

Flexible insulating sleeving - Part 1: Definitions and general requirements

Applicable to flexible insulating sleeving primarily for insulating conductors and connectors of electrical apparatus. Some of the types of sleeving are also suitable for binding, identification, environmental sealing and mechanical protection. This standard is not applicable to coated papers. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This second edition includes additional clauses providing clarification on the sheet numbering system, guidance on qualification approval requirements and a guide to tests that are size and/or colour dependant.

Isolierschläuche - Teil 1: Begriffe und allgemeine Anforderungen

Gaines isolantes souples - Partie 1: Définitions et exigences générales

S'applique aux gaines isolantes souples destinées principalement à isoler les conducteurs et les raccordements des appareils électriques. Certains types de gaines permettent aussi les liaisons, l'identification, l'herméticité environne-mentale et la protection mécanique. La présente norme ne s'applique pas aux papiers enduits. Les matériaux qui sont conformes à cette spécification satisfont à des niveaux de perfor-mance établis. Cependant, il convient que le choix d'un matériau par un utilisateur et pour une application particulière soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et non fondée sur cette seule spécification. Cette deuxième édition comprend des articles supplémentaires donnant des clarifications sur le système de numérotation des feuilles, des indications sur les exigences pour la certification de la qualité, et des explications sur les essais qui sont dépendants de la taille et de la couleur.

Gibke izolacijske cevi - 1. del: Definicije in splošne zahteve (IEC 60684-1:2003)

General Information

• Status: Published
• Publication Date: 14-Jul-2003
• Withdrawal Date: 30-Jun-2006
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Jul-2003
• Completion Date: 15-Jul-2003
• Ref Project: SIST EN 60684-1:2004 - Flexible insulating sleeving -- Part 1: Definitions and general requirements

Relations

• Replaces: EN 60684-1:1995 - Specification for flexible insulating sleeving - Part 1: Definitions and general requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60684-1:2004

STANDARD
september 2004
Gibke izolacijske cevi - 1. del: Definicije in splošne zahteve (IEC 60684-1:2003)
Flexible insulating sleeving - Part 1: Definitions and general requirements (IEC
60684-1:2003)
ICS 01.040.29; 29.035.20 Referenčna številka
SIST EN 60684-1:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60684-1
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2003

ICS 29.035.20 Supersedes EN 60684-1:1995


English version


Flexible insulating sleeving
Part 1: Definitions and general requirements
(IEC 60684-1:2003)


Gaines isolantes souples Isolierschläuche
Partie 1: Définitions et exigences Teil 1: Begriffe und allgemeine
générales Anforderungen
(CEI 60684-1:2003) (IEC 60684-1:2003)




This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60684-1:2003 E

---------------------- Page: 2 ----------------------

EN 60684-1:2003 - 2 -
Foreword
The text of document 15C/1460/FDIS, future edition 2 of IEC 60684-1, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60684-1 on 2003-07-01.
This European Standard supersedes EN 60684-1:1995.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-07-01

This edition of EN 60684-1 includes additional clauses providing clarification on the sheet
numbering system, guidance on qualification approval requirements and a guide to tests that are
size and/or colour dependant.

Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-1:2003 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60684-1:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-212 1990 International Electrotechnical - -
Vocabulary (IEV)
Chapter 212: Insulating solids, liquids
and gases

IEC 60304 1982 Standard colours for insulation for low- HD 402 S2 1984
frequency cables and wires

IEC 60684-2 1997 Flexible insulating sleeving EN 60684-2 1997
Part 2: Methods of test

IEC 60684-3 Series Part 3: Specifications for individual HD 523.3 Series
types of sleeving EN 60684-3 Series

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
...