EN 61784-5-6:2012
(Main)Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6
Vote launched on 65C/602/FDIS split into 9 subparts to be published separately at IEC and CLC levels * Supersedes EN 61784-5-6:2008 * Superseded by EN 61784-5-6:2013
Industrielle Kommunikationsnetze - Profile - Teil 5-6: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 6
Réseaux de communication industriels - Profils - Partie 5-6: Installation des bus de terrain - Profils d'installation pour CPF 6
Industrijska komunikacijska omrežja - Profili - 5-6. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 6 (IEC 61784-5-6:2010)
Ta del standarda IEC 61784 določa inštalacijske profile za CPF 6 (INTERBUS) 1. Inštalacijski profili so navedeni v dodatkih. Ti dodatki se navezujejo na standard IEC 61918:2010.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrijska komunikacijska omrežja - Profili - 5-6. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 6
(IEC 61784-5-6:2010)Industrielle Kommunikationsnetze - Profile - Teil 5-6: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 6
(IEC 61784-5-6:2010)Réseaux de communication industriels - Profils - Partie 5-6: Installation des bus de terrain - Profils d'installation pour CPF 6 (CEI 61784-5-6:2010)Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 (IEC 61784-5-6:2010)35.100.05UHãLWYHMultilayer applications25.040.40Merjenje in krmiljenje industrijskih postopkovIndustrial process measurement and controlICS:Ta slovenski standard je istoveten z:EN 61784-5-6:2012SIST EN 61784-5-6:2012en01-junij-2012SIST EN 61784-5-6:2012SLOVENSKI
STANDARDSIST EN 61784-5-6:20081DGRPHãþD
EUROPEAN STANDARD EN 61784-5-6 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-6:2012 E
ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-6:2008
English version
Industrial communication networks -
Profiles -
Part 5-6: Installation of fieldbuses -
Installation profiles for CPF 6 (IEC 61784-5-6:2010)
Réseaux de communication industriels -
Profils -
Partie 5-6: Installation des bus de terrain - Profils d'installation pour CPF 6 (CEI 61784-5-6:2010)
Industrielle Kommunikationsnetze -
Profile -
Teil 5-6: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 6 (IEC 61784-5-6:2010)
This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 65C/602/FDIS, future edition 2 of IEC 61784-5-6, prepared by SC 65C, "Industrial networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-6:2012.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-20 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-10-19
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 61784-5-6:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61158 series NOTE
Harmonized as EN 61158 series. IEC/TR 61158-1 NOTE
Harmonized as CLC/TR 61158-1. SIST EN 61784-5-6:2012
- 3 - EN 61784-5-6:2012 Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60189-1 2007 Low-frequency cables and wires with PVC insulation and PVC sheath -
Part 1: General test and measuring methods - -
IEC 60794-1-2 2003 Optical fibre cables -
Part 1-2: Generic specification - Basic optical cable test procedures EN 60794-1-2 2003
IEC 61156-1 2007 Multicore and symmetrical pair/quad cables for digital communications -
Part 1: Generic specification - -
IEC 61156-5 - Multicore and symmetrical pair/quad cables for digital communications -
Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz -Horizontal floor wiring - Sectional specification- -
IEC 61918
2010 Industrial communication networks - Installation of communication networks in industrial premises - -
IEC 61784-5-6Edition 2.0 2010-07INTERNATIONAL STANDARD
Industrial communication networks – Profiles –
Part 5-6: Installation of fieldbuses – Installation profiles for CPF 6
INTERNATIONAL ELECTROTECHNICAL COMMISSION XICS 25.040.40; 35.100.40 PRICE CODEISBN 978-2-88912-054-3
– 2 – 61784-5-6 © IEC:2010(E) CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references.7 3 Terms, definitions and abbreviated terms.7 4 CPF 6: Overview of installation profiles.7 5 Installation profile conventions.7 6 Conformance to installation profiles.8 Annex A (normative)
CPF 6 Type 8 network specific installation profile.10 Annex B (normative)
CPF 6 Ethernet network specific installation profile.34 Bibliography.50
Figure 1 – Standards relationships.6 Figure A.1 – Type 8 network structure example.14 Figure A.2 – Example of a Type 8 network configuration.15 Figure A.3 – Sub-D connector pin assignments.29 Figure A.4 – M23 circular connector pin assignments.29 Figure A.5 – M12 circular connector pin assignments.30 Figure A.6 – Terminal connector at the device.30 Figure B.1 – Plug connector interface M12-FO.43 Figure B.2 – Adaptor connector interface M12-FO.44 Figure B.3 – Terminal connector at the device.48
Table A.1 – Basic network characteristics for balanced cabling not based on Ethernet.16 Table A.2 – Network characteristics for optical fibre cabling.17 Table A.3 – Information relevant to balanced cable: fixed cables.18 Table A.4 – Information relevant to balanced cable: cords.19 Table A.5 – Remote bus fibre optic cable length.21 Table A.6 – Connectors for copper cabling CPs not based on Ethernet.22 Table A.7 – Optical fibre connecting hardware.22 Table A.8 – Relationship between FOC and fibre types (Type 8 networks).23 Table A.9 – Colour code for balanced cables used by Type 8 networks.24 Table A.10 – Parameters for balanced cables.27 Table A.11 – Parameters for silica optical fibre cables.27 Table A.12 – Parameters for POF optical fibre cables.27 Table A.13 – Parameters for hard clad silica optical fibre cables.28 Table A.14 – Pin assignment of the terminal connector.30 Table B.1 – Network characteristics for balanced cabling based on Ethernet.37 Table B.2 – Network characteristics for optical fibre cabling.37 Table B.3 – Information relevant to balanced cable: fixed cables.39 Table B.4 – Information relevant to balanced cable: cords.40 Table B.5 — Information relevant to optical fibre cables.41 SIST EN 61784-5-6:2012
61784-5-6 © IEC:2010(E) – 3 – Table B.6 – Connectors for balanced cabling CPs based on Ethernet.42 Table B.7 – Optical fibre connecting hardware.42 Table B.8 – Relationship between FOC and fibre types (CP 6/2 Ethernet network).45 Table B.9 – Parameters for balanced cables.47 Table B.10 – Parameters for silica optical fibre cables.47 Table B.11 – Parameters for POF optical fibre cables.47 Table B.12 – Parameters for hard clad silica optical fibre cables.48
– 4 – 61784-5-6 © IEC:2010(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
INDUSTRIAL COMMUNICATION NETWORKS –
PROFILES –
Part 5-6: Installation of fieldbuses –
Installation profiles for CPF 6
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.