EN 60684-3-246:2002
(Main)Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual-wall, not flame retarded
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual-wall, not flame retarded
Defines requirements for dual wall, not flame retarded, heat shrinkable, polyolefin sleeving. This sleeving has been found suitable for use up to 80 °C. The sleeving consists of an outer layer made of a semi-rigid cross-linked material. The inner layer is a substantially non-cross-linked polyolefin that flows and fuses during the shrinkage process to provide a seal. It is normally offered for sale with an internal diameter up to 25 mm in the following colours: black, white, red, yellow, blue and translucent. Sizes or colours other than those listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in tables 2, 3, 4 and 5, excluding dimensions. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 246: Wärmeschrumpfende Polyolefinschläuche mit Innenbeschichtung, nicht flammhemmend
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 246: Gaines thermorétractables en polyoléfine, à double paroi, non retardées à la flamme
Donne les prescriptions relatives aux gaines thermorétractables en polyoléfine, double paroi, non retardées à la flamme. Il a été constaté que ces gaines étaient adaptées à une utilisation allant jusqu'à 80 °C. Ces gaines sont composées d'une couche externe faite d'un matériau semi-rigide réticulé. La couche interne est principalement en polyoléfine non réticulée qui coule et fond au cours du processus de rétreint pour réaliser une étanchéité. Ces gaines sont normalement fournies avec des diamètres intérieurs allant jusqu'à 25 mm et avec les couleurs suivantes: noir, blanc, rouge, jaune, bleu et translucide. D'autres dimensions et d'autres couleurs que celles indiquées dans cette norme peuvent être disponibles comme articles spéciaux. Ces articles doivent être considérés comme satisfaisant à cette norme s'ils satisfont aux exigences indiquées dans les tableaux 2, 3, 4 et 5, dimensions excluses. Les matériaux conformes à cette spécification satisfont à des niveaux établis de performance. Cependant, il convient que le choix d'un matériau par un utilisateur, pour une application spécifique, soit fondé sur les exigences réelles nécessaires pour une performance adéquate de cette application, et non fondé sur cette seule spécification.
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 246. list: Toplotno skrčljive poliolefinske cevi z dvojno steno (notranjo prevleko), niso ognjevarne (IEC 60684-3-246:2001)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Isolierschläuche -- Teil 3: Anforderungen für einzelne Schlauchtypen -- Blatt 246: Wärmeschrumpfende Polyolefinschläuche mit Innenbeschichtung, nicht flammhemmendGaines isolantes souples -- Partie 3: Spécifications pour types particuliers de gaines -- Feuille 246: Gaines thermorétractables en polyoléfine, à double paroi, non retardées à la flammeFlexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 246: Heat-shrinkable polyolefin sleeving, dual-wall, not flame retarded29.035.20PDWHULDOLPlastics and rubber insulating materialsICS:Ta slovenski standard je istoveten z:EN 60684-3-246:2002SIST EN 60684-3-246:2004en01-september-2004SIST EN 60684-3-246:2004SLOVENSKI
STANDARDSIST EN 60684-3-246:19981DGRPHãþD
EUROPEAN STANDARDEN 60684-3-246NORME EUROPÉENNEEUROPÄISCHE NORMApril 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 60684-3-246:2002 EICS 29.035.20Supersedes EN 60684-3-246:1995English versionFlexible insulating sleevingPart 3: Specifications for individual types of sleevingSheet 246: Heat-shrinkable polyolefin sleeving,dual-wall, not flame retarded(IEC 60684-3-246:2001)Gaines isolantes souplesPartie 3: Spécificationspour types particuliers de gainesFeuille 246: Gaines thermorétractablesen polyoléfine, à double paroi,non retardées à la flamme(CEI 60684-3-246:2001)IsolierschläucheTeil 3: Anforderungenfür einzelne SchlauchtypenBlatt 246: WärmeschrumpfendePolyolefinschläuchemit Innenbeschichtung,nicht flammhemmend(IEC 60684-3-246:2001)This European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.SIST EN 60684-3-246:2004
- 3 -EN 60684-3-246:2002Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 60684-11980Specification for flexible insulatingsleevingPart 1: Definitions and generalrequirementsEN 60684-11995IEC 60684-21997Part 2: Methods of testEN 60684-21997IEC 607571983Code for designation of coloursHD 457 S11985ISO 18171985Rubber, vulcanized - Determination ofthe effect of liquids--SIST EN 60684-3-246:2004
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60684-3-246Deuxième éditionSecond edition2001-08Gaines isolantes souples –Partie 3:Spécifications pour types particuliers de gaines –Feuille 246: Gaines thermorétractablesen polyoléfine, à double paroi, non retardéesà la flammeFlexible insulating sleeving –Part 3:Specifications for individual types of sleeving –Sheet 246: Heat-shrinkable polyolefin sleeving,dual wall, not flame retarded Commission Electrotechnique Internationale International Electrotechnical CommissionPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2001
Droits de reproduction réservés
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without permission inwriting from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: +41 22 919 0300e-mail: inmail@iec.ch IEC web site
http://www.iec.chCODE PRIXPRICE CODEJSIST EN 60684-3-246:2004
60684-3-246 IEC:2001– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION___________FLEXIBLE INSULATING SLEEVING –Part 3: Specifications for individual types of sleeving –Sheet 246: Heat-shrinkable polyolefin sleeving,dual wall, not flame retardedFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)
In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)
The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60684-3-246 has been prepared by subcommittee 15C:Specifications, of IEC technical committee 15: Insulating materials.This second edition cancels and replaces the first edition published in 1992, and constitutes atechnical revision.The text of this standard is based on the following documents:FDISReport on voting15C/1237/FDIS15C/1262/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been draft
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.