iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60664-1:2020/AC:2020-12

(Corrigendum)

Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

TAN - // IEC Corrigendum

Isolationskoordination für elektrische Betriebsmittel in Niederspannungsanlagen - Teil 1: Grundsätze, Anforderungen und Prüfungen (IEC 60664-1:2020/COR1:2020)

Coordination de l'isolement des matériels dans les réseaux d'énergie électrique à basse tension - Partie 1: Principes, exigences et essais

Koordinacija izolacije za opremo v okviru nizkonapetostnih sistemov - 1. del: Načela, zahteve in preskusi - Popravek AC (IEC 60664-1:2020/COR1:2020)

General Information

Status
Published
Publication Date
03-Dec-2020
ICS
29.080.30 - Insulation systems
Technical Committee
CLC/SR 109 - Insulation co-ordination for low-voltage equipment
Drafting Committee
CLC/SR 109 - Insulation co-ordination for low-voltage equipment
Current Stage
6060 - Document made available - Publishing
Start Date
04-Dec-2020
Completion Date
04-Dec-2020
Ref Project
SIST EN IEC 60664-1:2020/AC:2021 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests (IEC 60664-1:2020/COR1:2020)

Relations

Corrects
EN IEC 60664-1:2020 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
Effective Date
10-Nov-2020

Buy Standard

EN IEC 60664-1:2020/AC:2021EN IEC 60664-1:2020/AC:2021
PreviousNext
Corrigendum
EN IEC 60664-1:2020/AC:2021
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2021
Koordinacija izolacije za opremo v okviru nizkonapetostnih sistemov - 1. del:
Načela, zahteve in preskusi - Popravek AC (IEC 60664-1:2020/COR1:2020)
Insulation coordination for equipment within low-voltage supply systems - Part 1:
Principles, requirements and tests (IEC 60664-1:2020/COR1:2020)
Isolationskoordination für elektrische Betriebsmittel in Niederspannungsanlagen - Teil 1:
Grundsätze, Anforderungen und Prüfungen (IEC 60664-1:2020/COR1:2020)
Coordination de l'isolement des matériels dans les réseaux d'énergie électrique à basse
tension - Partie 1: Principes, exigences et essais (IEC 60664-1:2020/COR1:2020)
Ta slovenski standard je istoveten z: EN IEC 60664-1:2020/AC:2020-12
ICS:
29.080.30 Izolacijski sistemi Insulation systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60664-
1:2020/AC:2020-12
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2020
ICS 29.080.30
English Version
Insulation coordination for equipment within low-voltage supply
systems - Part 1: Principles, requirements and tests
(IEC 60664-1:2020/COR1:2020)
Coordination de l'isolement des matériels dans les réseaux To be completed
d'énergie électrique à basse tension - Partie 1: Principes, (IEC 60664-1:2020/COR1:2020)
exigences et essais
(IEC 60664-1:2020/COR1:2020)
This corrigendum becomes effective on 4 December 2020 for incorporation in the English language version of the EN.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60664-1:2020(Main)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
SIST EN IEC 60664-1:2020

IEC 60664-1:2020 deals with insulation coordination for equipment having a rated voltage up to AC 1 000 V or DC 1 500 V connected to low-voltage supply systems. This document applies to frequencies up to 30 kHz. It applies to equipment for use up to 2 000 m above sea level and provides guidance for use at higher altitudes. It provides requirements for technical committees to determine clearances, creepage distances and criteria for solid insulation. It includes methods of electrical testing with respect to insulation coordination. The minimum clearances specified in this document do not apply where ionized gases are present. Special requirements for such situations can be specified at the discretion of the relevant technical committee. This document does not deal with distances: – through liquid insulation; – through gases other than air; – through compressed air. This edition includes the following significant technical changes with respect to the previous edition:
update of the Scope, Clauses 2 and 3,
addition of 1 500 V DC into tables,
new structure for Clauses 4 and 5,
addition of Annex G with a flowchart for clearances,
addition of Annex H with a flowchart for creepage distances,
update of distances altitude correction in a new Table F.10.  It has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60664-3:2017(Main)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
SIST EN 60664-3:2017

Applies to rigid printed board assemblies protected by a coating of insulating material on one or both sides. Describes the requirements and test procedures. Has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60664-4:2006(Main)
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
SIST EN 60664-4:2007

Deals with basic, supplementary and reinforced insulation subjected to high-frequency voltage stress within low-voltage equipment. The dimensioning values directly apply for basic insulation; for reinforced insulation additional requirements apply according to Part 1. It is applicable for the dimensioning of clearances, creepage distances and solid insulation stressed by any type of periodic voltages with a fundamental frequency above 30 kHz and up to 10 MHz. This part of EN 60664 can only be used together with EN 60664-1 or with EN 60664-5 (in this standard called Part 1 or Part 5). By using Part 1 or Part 5 together with this part the frequency limit of Part 1 or Part 5 is extended to frequencies higher than 30 kHz. This part also applies to Part 3 for frequencies greater than 30 kHz and protection of type 1. For type 2 protection this question is under consideration. Applies to equipment for use up to 2 000 m above sea level having a rated voltage up to a.c. 1 000 V. Specifies the requirements for clearances, creepage distances and solid insulation for equipment based upon their performance criteria. lt includes methods of electric testing with respect to insulation coordination. The minimum clearances specified in this part do not apply where ionized gases occur. Special requirements for such situations may be specified at the discretion of the relevant technical committee. This part does not deal with distances - through liquid insulation, - through gases other than air, - through compressed air. The object of this standard is to guide technical committees responsible for different equipment in order to rationalise their requirements so that insulation coordination is achieved when specifying clearances in air, creepage distances and solid insulation for equipment. The major changes made during the revision of EN 60664-4 were the following: - inclusion of more recent information about the withstand characteristics of insulation at high-frequency voltage stress

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60664-1:2020/prA1:2024(Amendment)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
SIST EN IEC 60664-1:2020/oprA1:2024
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61858-1:2014/AC:2024-05(Corrigendum)
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
SIST EN 61858-1:2014/AC:2024
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60071-11:2022/AC:2023-12(Corrigendum)
Insulation co-ordination - Part 11： Definitions, principles and rules for HVDC system
SIST EN IEC 60071-11:2023/AC:2024
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60071-2:2023(Main)
Insulation co-ordination - Part 2: Application guidelines
SIST EN IEC 60071-2:2023

This part of IEC 60071 constitutes application guidelines and deals with the selection of insulation levels of equipment or installations for three-phase a.c. systems. Its aim is to give guidance for the determination of the rated withstand voltages for ranges I and II of IEC 60071- 1 and to justify the association of these rated values with the standardized highest voltages for equipment. This association is for insulation co-ordination purposes only. The requirements for human safety are not covered by this document. This document covers three-phase a.c. systems with nominal voltages above 1 kV. The values derived or proposed herein are generally applicable only to such systems. However, the concepts presented are also valid for two-phase or single-phase systems. This document covers phase-to-earth, phase-to-phase and longitudinal insulation. This document is not intended to deal with routine tests. These are to be specified by the relevant product committees. The content of this document strictly follows the flow chart of the insulation co-ordination process presented in Figure 1 of IEC 60071-1:2019. Clauses 5 to 8 correspond to the squares in this flow chart and give detailed information on the concepts governing the insulation coordination process which leads to the establishment of the required withstand levels. This document emphasizes the necessity of considering, at the very beginning, all origins, all classes and all types of voltage stresses in service irrespective of the range of highest voltage for equipment. Only at the end of the process, when the selection of the standard withstand voltages takes place, does the principle of covering a particular service voltage stress by a standard withstand voltage apply. Also, at this final step, this document refers to the correlation made in IEC 60071-1 between the standard insulation levels and the highest voltage for equipment. The annexes contain examples and detailed information which explain or support the concepts described in the main text, and the basic analytical techniques used.

  • Standard
    187 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60071-11:2022(Main)
Insulation co-ordination - Part 11：Definitions, principles and rules for HVDC system
SIST EN IEC 60071-11:2023

IEC 60071-11:2022 applies to high-voltage direct current (HVDC) systems. It specifies the principles on the procedures for the determination of the specified withstand voltages, creepage distance and air clearances for the equipment and the installations of these systems. This document gives the insulation co-ordination principles related to line commutated converter (LCC) and voltage sourced converters (VSC) HVDC systems. The main principles of this document also apply to other special converter configurations of LCC, such as the capacitor commutated converter (CCC) as well as the controlled series compensated converter (CSCC), etc. This document applies to insulation co-ordination of equipment connected between the converter AC bus (including the AC harmonic filters, the converter transformer, the circuit breakers) and the DC line side. The line and cable terminations in so far as they influence the insulation co-ordination of converter station equipment are also covered. This document applies only for HVDC applications in power systems and not for industrial conversion equipment. Principles and guidance given are for insulation co-ordination purposes only. The requirements for human safety are not covered by this document. This international standard replaces, in conjunction with IEC 60071-12, IEC 60071-5 published in 2014. This edition includes the following significant technical changes with respect to IEC 60071‑5:2014:
This standard applies to both LCC and VSC HVDC systems whereas IEC 60071-5 only dealt with LCC HVDC system;
Annex C (normative) gives the recommended specified withstand voltage (LI and SI);
Annex C (normative) gives the minimum air clearances;
Annex E shows the correlation of clauses between this standard and IEC 60071-5:2014.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60071-12:2022(Main)
Insulation co-ordination - Part 12: Application guidelines for LCC HVDC converter stations
SIST EN IEC 60071-12:2023

IEC 60071-12:2022 applies guidelines on the procedures for insulation co-ordination of line commutated converter (LCC) stations for high-voltage direct current (HVDC) project, whose aim is evaluating the overvoltage stresses on the converter station equipment subjected to combined DC, AC power frequency, harmonic and impulse voltages, and determining the specified withstand voltages for equipment. This document deals only with metal-oxide surge arresters, without gaps, which are used in modern HVDC converter stations. The criteria for determining the protective levels of series and/or parallel combinations of surge arresters used to ensure optimal protection are also presented. Typical arrester protection schemes and stresses of arresters are presented. Annex A contains examples of insulation co-ordination for LCC HVDC converters which support the concepts described in the main text, and the basic analytical techniques used.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60664-1:2020(Main)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
SIST EN IEC 60664-1:2020

IEC 60664-1:2020 deals with insulation coordination for equipment having a rated voltage up to AC 1 000 V or DC 1 500 V connected to low-voltage supply systems. This document applies to frequencies up to 30 kHz. It applies to equipment for use up to 2 000 m above sea level and provides guidance for use at higher altitudes. It provides requirements for technical committees to determine clearances, creepage distances and criteria for solid insulation. It includes methods of electrical testing with respect to insulation coordination. The minimum clearances specified in this document do not apply where ionized gases are present. Special requirements for such situations can be specified at the discretion of the relevant technical committee. This document does not deal with distances: – through liquid insulation; – through gases other than air; – through compressed air. This edition includes the following significant technical changes with respect to the previous edition:
update of the Scope, Clauses 2 and 3,
addition of 1 500 V DC into tables,
new structure for Clauses 4 and 5,
addition of Annex G with a flowchart for clearances,
addition of Annex H with a flowchart for creepage distances,
update of distances altitude correction in a new Table F.10.  It has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day