Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz

Specifies methods for calibration of hydrophones or reversible transducers when used as a hydrophone, particularly in the frequency range from 0,01 Hz to 1 MHz. Rules for the presentation of the calibration data are established.

Wasserschall - Hydrophone - Kalibrierung im Frequenzbereich von 0,01 Hz bis 1 MHz

Acoustique sous-marine - Hydrophones - Etalonnage dans la bande de fréquences de 0,01 Hz à 1 MHz

Spécifie des méthodes pour l'étalonnage des hydrophones ou des transducteurs réversibles utilisés comme des hydrophones, en particulier dans la bande de fréquences de 0,01 Hz à 1 MHz. Les règles de présentation des résultats d'étalonnage sont établies.

Podvodna akustika - Hidrofoni - Kalibracija v frekvenčnem območju od 0,01 Hz do 1 MHz (IEC 60565:2006)

General Information

Status
Withdrawn
Publication Date
03-Jan-2007
Withdrawal Date
30-Nov-2009
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-May-2023
Completion Date
29-May-2023

Relations

Buy Standard

Standard
EN 60565:2008
English language
86 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2008
3RGYRGQDDNXVWLND+LGURIRQL.DOLEUDFLMDYIUHNYHQþQHPREPRþMXRG+]GR
0+] ,(&
Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1
MHz (IEC 60565:2006)
Wasserschall - Hydrophone - Kalibrierung im Frequenzbereich von 0,01 Hz bis 1 MHz
(IEC 60565:2006)
Acoustique sous-marine - Hydrophones - Etalonnage dans la bande de fréquences de
0,01 Hz a 1 MHz (IEC 60565:2006)
Ta slovenski standard je istoveten z: EN 60565:2007
ICS:
17.140.50 Elektroakustika Electroacoustics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60565
NORME EUROPÉENNE
January 2007
EUROPÄISCHE NORM
ICS 17.140.50
English version
Underwater acoustics -
Hydrophones -
Calibration in the frequency range 0,01 Hz to 1 MHz
(IEC 60565:2006)
Acoustique sous-marine -  Wasserschall -
Hydrophones - Hydrophone -
Etalonnage dans la bande de fréquences Kalibrierung im Frequenzbereich
de 0,01 Hz à 1 MHz von 0,01 Hz bis 1 MHz
(CEI 60565:2006) (IEC 60565:2006)

This European Standard was approved by CENELEC on 2006-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60565:2007 E
Foreword
The text of document 87/357/FDIS, future edition 2 of IEC 60565, prepared by IEC TC 87, Ultrasonics,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60565 on
2006-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60565:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60565:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1)
IEC 60050-801 - International Electrotechnical Vocabulary - -
(IEV)
Chapter 801: Acoustics and electroacoustics

IEC 60500 1974 IEC standard hydrophone - -

IEC 60866 1987 Characteristics and calibration of - -
hydrophones for operation in the frequency
range 0,5 MHz to 15 MHz
1)
Undated reference.
NORME CEI
INTERNATIONALE
IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-11
Acoustique sous-marine –
Hydrophones –
Étalonnage dans la bande de
fréquences de 0,01 Hz à 1 MHz
Underwater acoustics –
Hydrophones –
Calibration in the frequency
range 0,01 Hz to 1 MHz
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
XC
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60565 © IEC:2006 – 3 –
CONTENTS
FOREWORD.9

1 Scope.13
2 Normative references .13
3 Terms and definitions .13
4 Symbols and abbreviated terms.25
5 Procedures for calibrations.29
5.1 Principles .29
5.2 Field limitations .31
5.3 Schematic survey of procedures.31
5.4 Reporting of results .31
5.5 Recalibration periods.33
5.6 Temperature and pressure considerations for calibration.33
6 Preparation of transducers .33
6.1 Wetting.33
6.2 Hydrophone support .33
6.3 Influence of cable .33
7 Electrical measurements .35
7.1 Signal type .35
7.2 Earthing .35
7.3 Measurement of hydrophone output voltage .35
7.4 Measurement of projector current.37
7.5 Measurement of transfer impedance.39
8 Free-field reciprocity calibration.39
8.1 General principle .39
8.2 Theory.41
8.3 Separation distance.51
8.4 Minimum distance from transducers to boundary surface.51
8.5 Frequency limitation .51
8.6 Measurements and checks .53
8.7 Uncertainty.59
9 Free-field calibration by comparison .59
9.1 Principle.59
9.2 Comparison with a standard hydrophone.59
9.3 Calibration with a calibrated projector.61
10 Calibration by hydrostatic excitation .63
10.1 Principle.63
10.2 Determination of equivalent pressure .63
10.3 Measurement of the sensitivity of hydrophones .71
10.4 Design of vibration system .73
10.5 Uncertainty.75
10.6 Alternative method for hydrostatic excitation .75
11 Calibration by piezoelectric compensation .75
11.1 Principle.75
11.2 Procedure .77

60565 © IEC:2006 – 5 –
11.3 Design of the calibration chamber .81
11.4 Practical limitations of the piezoelectric compensation method .85
11.5 Uncertainty.85
12 Acoustic coupler reciprocity calibration.85
12.1 Principle……….85
12.2 Procedure .85
12.3 Theory……….87
12.4 Acoustic compliance.89
12.5 High-frequency limit .89
12.6 Low-frequency limit .89
12.7 Measurement .89
12.8 Uncertainty.91
12.9 Limitations.91
12.10 Acoustic-coupler calibration using a reference coupler with two reciprocal
transducers and an auxiliary coupler with the same two transducers and a
hydrophone to be calibrated .91
12.11 Acoustic-coupler calibration using a reference coupler with two reciprocal
transducers and an auxiliary coupler with the same two transducers, a
hydrophone to be calibrated, and a sound source.95
12.12 Acoustic-coupler calibration using a coupler, a reciprocal transducer, a
projector, a hydrophone to be calibrated, and a subsidiary body of known
compliance.99
13 Calibration with a pistonphone.103
13.1 Principle……….103
13.2 Procedure .103
13.3 Limitations.109
13.4 Uncertainty.111
14 Calibration with a vibrating column .111
14.1 Principle……….111
14.2 Procedure .113
14.3 Expression for the pressure.115
14.4 Determination of the sensitivity.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.