EN 61196-3-2:1997

Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s

Relates to the subfamily of coaxial cables for digital communication. Should be used together with EN 61196-1 and EN 61196-3. Gives subfamily requirements and severities to be applied.

Hochfrequenzkabel - Teil 3-2: Koaxialkabel für Etagenverkabelung in der digitalen Kommunikation - Bauartspezifikation für Koaxialkabel mit Massiv-Dielektrikum für lokale Netze mit 185 m Reichweite und bis 10 Mb/s

Câbles pour fréquences radioélectriques - Partie 3-2: Câbles coaxiaux pour transmission numérique destinés au câblage horizontal des immeubles - Spécification particulière pour les câbles coaxiaux avec diélectrique solide pour réseaux locaux jusqu'à 185 m, et de débit maximal de 10 Mb/s

Concerne la sous-famille des cables coaxiaux pour transmission numérique. Convient d'utiliser conjointement avec la EN 61196-1 et EN 61196-3. Donne les exigences et les révérités à appliquer à la sous-famille.

Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997)

General Information

• Status: Published
• Publication Date: 18-Nov-1997
• Withdrawal Date: 30-Jun-1998
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: CLC/SC 46XA - Coaxial cables
• Parallel Committee: IEC/SC 46A - IEC_SC_46A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 19-Nov-1997
• Completion Date: 19-Nov-1997
• Ref Project: SIST EN 61196-3-2:1998 - Radio frequency cables -- Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61196-3-2:1998
01-april-1998
Radio frequency cables - Part 3-2: Coaxial cables for digital communication in
horizontal floor wiring - Detail specification for coaxial cables with solid dielectric
for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997)
Radio frequency cables -- Part 3-2: Coaxial cables for digital communication in horizontal
floor wiring - Detail specification for coaxial cables with solid dielectric for local area
networks of 185 m reach and up to 10 Mb/s
Hochfrequenzkabel -- Teil 3-2: Koaxialkabel für Etagenverkabelung in der digitalen
Kommunikation - Bauartspezifikation für Koaxialkabel mit Massiv-Dielektrikum für lokale
Netze mit 185 m Reichweite und bis 10 Mb/s
Câbles pour fréquences radioélectriques -- Partie 3-2: Câbles coaxiaux pour
transmission numérique destinés au câblage horizontal des immeubles - Spécification
particulière pour les câbles coaxiaux avec diélectrique solide pour réseaux locaux
jusqu'à 185 m, et de débit maximal de 10 Mb/s
Ta slovenski standard je istoveten z: EN 61196-3-2:1997
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 61196-3-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61196-3-2:1998

---------------------- Page: 2 ----------------------





SIST EN 61196-3-2:1998

---------------------- Page: 3 ----------------------

SIST EN 61196-3-2:1998

---------------------- Page: 4 ----------------------

SIST EN 61196-3-2:1998
NORME
CEI
INTERNATIONALE
IEC
61196-3-2
INTERNATIONAL
Première édition
STANDARD
First edition
1997-09
Câbles pour fréquences radioélectriques –
Partie 3-2:
Câbles coaxiaux pour transmission numérique
destinés au câblage horizontal des immeubles –
Spécification particulière pour les câbles coaxiaux
avec diélectrique solide pour réseaux locaux
jusqu'à 185 m, et de débit maximal de 10 Mb/s
Radio frequency cables –
Part 3-2:
Coaxial cables for digital communication
in horizontal floor wiring –
Detail specification for coaxial cables with solid
dielectric for local area networks of 185 m reach
and up to 10 Mb/s
 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
E
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 61196-3-2:1998
61196-3-2 © IEC:1997 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
RADIO FREQUENCY CABLES –
Part 3-2: Coaxial cables for digital communication
in horizontal floor wiring –
Detail specification for coaxial cables with solid dielectric
for local area networks of 185 m reach and up to 10 Mb/s
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the
...