EN 60745-2-3:2011

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

The contents of the corrigendum of February 2011 have been included in this copy.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt

Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les meuleuses, lustreuses et ponceuses du type à disque

Le contenu du corrigendum de février 2011 a été pris en considération dans cet exemplaire.

Električna ročna orodja - Varnost - 2-3. del: Posebne zahteve za brusilnike, polirnike in diskovne brusilnike (IEC 60745-2-3:2006, spremenjen + A1:2010, spremenjen + A1:2010/popravek feb. 2011)

Ta standard velja za brusilnike z nazivno hitrostjo, ki ne presega obodne hitrosti dodatka 80 m/s pri nazivni moči, polirnike in diskovne peskalnike, vključno s kotnimi, ravnimi in navpičnimi. Ta standard velja za orodja z nazivno močjo, ki ne presega 230 mm.

General Information

• Status: Published
• Publication Date: 17-Feb-2011
• Withdrawal Date: 31-Jan-2014
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Feb-2011
• Completion Date: 18-Feb-2011
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Ref Project: SIST EN 60745-2-3:2011 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified + A1:2010, modified + A1:2010/corrigendum Feb. 2011)

Relations

• Replaces: EN 60745-2-3:2007 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 62841-2-3:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
• Effective Date: 23-Jan-2023
• Amended By: EN 60745-2-3:2011/A12:2014 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• Effective Date: 29-Jan-2023
• Amended By: EN 60745-2-3:2011/prAA:2012 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• Effective Date: 28-Jan-2023
• Amended By: EN 60745-2-3:2011/A2:2013 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• Effective Date: 28-Jan-2023
• Amended By: EN 60745-2-3:2011/A11:2014 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• Effective Date: 28-Jan-2023
• Amended By: EN 60745-2-3:2011/A13:2015 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-3:2011
01-maj-2011
1DGRPHãþD
SIST EN 60745-2-3:2007
SIST EN 60745-2-3:2007/A11:2010
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DEUXVLOQLNH
SROLUQLNHLQGLVNRYQHEUXVLOQLNH,(&VSUHPHQMHQ$
VSUHPHQMHQ$SRSUDYHNIHE
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for
grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified + A1:2010,
modified + A1:2010/corrigendum Feb. 2011)
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere
Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt (IEC 60745-2-3:2006,
modifiziert + A1:2010, modifiziert + A1:2010/corrigendum Feb. 2011)
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les
meuleuses, lustreuses et ponceuses du type à disque (CEI 60745-2-3:2006, modifiée +
A1:2010, modifiée + A1:2010/corrigendum Feb. 2011)
Ta slovenski standard je istoveten z: EN 60745-2-3:2011
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-3:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-3:2011

---------------------- Page: 2 ----------------------

SIST EN 60745-2-3:2011

EUROPEAN STANDARD
EN 60745-2-3

NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM

ICS 25.140.20 Supersedes EN 60745-2-3:2007 + A11:2009


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-3: Particular requirements for grinders,
polishers and disk-type sanders
(IEC 60745-2-3:2006, modified + A1:2010, modified
+ A1:2010/corrigendum Feb. 2011)

Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-3: Règles particulières pour les Sicherheit -
meuleuses, lustreuses et ponceuses du Teil 2-3: Besondere Anforderungen für
type à disque Schleifer, Polierer und Schleifer mit
(CEI 60745-2-3:2006, modifiée Schleifblatt
+ A1:2010, modifiée (IEC 60745-2-3:2006, modifiziert
+ A1:2010/corrigendum Feb. 2011) + A1:2010, modifiziert
+ A1:2010/corrigendum Feb. 2011)


This European Standard was approved by CENELEC on 2011-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-3:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-3:2011
EN 60745-2-3:2011 – 2 –
Foreword
The text of the International Standard IEC 60745-2-3:2006 + A1:2010, prepared by IEC TC 116,
Safety of hand-held motor-operated electric tools, together with the common modifications prepared
by the Technical Committee CENELEC TC 116, Safety of hand-held motor-operated electric tools,
was submitted to the formal vote and was approved as EN 60745-2-3:2011 on 2011-02-01.
This European Standard supersedes EN 60745-2-3:2007 + A11:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-02-01

– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2014-02-01
This European Standard is divided into two parts:
Part 1:
...