EN 60745-2-3:2011/A13:2015
(Amendment)Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
This standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders, including angle, straight and vertical. This standard applies to tools with a rated capacity not exceeding 230 mm.
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les meuleuses, lustreuses et ponceuses du type à disque
Električna ročna orodja - Varnost - 2-3. del: Posebne zahteve za brusilnike, polirnike in diskovne brusilnike - Dopolnilo A13
General Information
- Status
- Withdrawn
- Publication Date
- 19-Nov-2015
- Withdrawal Date
- 27-Sep-2018
- Technical Committee
- CLC/TC 116 - Safety of hand-held motor-operated electric tools
- Drafting Committee
- CLC/TC 116 - Safety of hand-held motor-operated electric tools
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 03-May-2025
- Completion Date
- 03-May-2025
Relations
- Effective Date
- 01-Jun-2021
- Effective Date
- 07-Jun-2022
Frequently Asked Questions
EN 60745-2-3:2011/A13:2015 is a amendment published by CLC. Its full title is "Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders". This standard covers: This standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders, including angle, straight and vertical. This standard applies to tools with a rated capacity not exceeding 230 mm.
This standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders, including angle, straight and vertical. This standard applies to tools with a rated capacity not exceeding 230 mm.
EN 60745-2-3:2011/A13:2015 is classified under the following ICS (International Classification for Standards) categories: 25.140.20 - Electric tools. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60745-2-3:2011/A13:2015 has the following relationships with other standards: It is inter standard links to EN IEC 62841-2-3:2021, EN 60745-2-3:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60745-2-3:2011/A13:2015 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 60745-2-3:2011/A13:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
(OHNWULþQDURþQDRURGMD9DUQRVWGHO 3RVHEQH]DKWHYH]DEUXVLOQLNH
SROLUQLNHLQGLVNRYQHEUXVLOQLNH'RSROQLOR$
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for
grinders, polishers and disk-type sanders
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-3: Besondere
Anforderungen für Schleifer, Polierer und Schleifer mit Schleifblatt
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Règles particulières pour les
meuleuses, lustreuses et ponceuses du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-3:2011/A13:2015
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60745-2-3:2011/A13
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2015
ICS 25.140.20
English Version
Hand-held motor-operated electric tools - Safety -
Part 2-3: Particular requirements for grinders, polishers and disk-
type sanders
Outils électroportatifs à moteur - Sécurité - Partie 2-3: Handgeführte motorbetriebene Elektrowerkzeuge -
Règles particulières pour les meuleuses, lustreuses et Sicherheit - Teil 2-3: Besondere Anforderungen für
ponceuses du type à disque Schleifer, Polierer und Schleifer mit Schleifblatt
This amendment A13 modifies the European Standard EN 60745-2-3:2011; it was approved by CENELEC on 2015-09-28. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60745-2-3:2011/A13:2015 E
EN 60745-2-3:2011/A13
...
기사 제목: EN 60745-2-3:2011/A13:2015 - 휴대용 모터 구동 전기 공구 - 안전 - Part 2-3: 연마기, 광택기 및 디스크형 샌더를 위한 특정 요구 사항 기사 내용: 이 표준은 평균 속도가 정격 용량에서 액세서리의 주변 속도가 80 m/s를 초과하지 않는 연마기, 광택기 및 디스크형 샌더, 포함하여 각도, 직진 및 수직을 포함하는 모터 구동 툴에 적용됩니다. 이 표준은 정격 용량이 230 mm를 초과하지 않는 툴에 적용됩니다.
The article discusses the safety requirements outlined in the standard EN 60745-2-3:2011/A13:2015. This standard applies to grinders, polishers, and disk-type sanders, including angle, straight, and vertical tools. The standard is applicable to tools that have a rated speed not exceeding a peripheral speed of 80 m/s and a rated capacity not exceeding 230 mm.
記事タイトル：EN 60745-2-3:2011/A13:2015 - 携帯用モーター駆動電動工具 - 安全性 - 第2-3部：グラインダー、ポリッシャー、ディスク型サンダーの特定要件 記事内容：この規格は、定格容量でアクセサリーの周辺速度が80 m/sを超えないグラインダー、ポリッシャーおよびディスク型サンダー（角度、直線、垂直を含む）に適用されます。この規格は、定格容量が230 mmを超えない工具に適用されます。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...