EN IEC 62841-2-6:2020/A12:2024
(Amendment)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
2021-12-14: This prAB includes common mods to EN IEC 62841-2-6:2020/A1 (PR=75447)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-6: Besondere Anforderungen für handgeführte Hämmer
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-6: Exigences particulières pour les marteaux portatifs
No scope available
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-6. del: Posebne zahteve za ročna kladiva - Dopolnilo A12
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62841-2-6:2020/A12:2024
01-julij-2024
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-
6. del: Posebne zahteve za ročna kladiva - Dopolnilo A12
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 2-6: Besondere Anforderungen für
handgeführte Hämmer
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 2-6: Exigences particulières pour les marteaux portatifs
Ta slovenski standard je istoveten z: EN IEC 62841-2-6:2020/A12:2024
ICS:
25.140.20 Električna orodja Electric tools
25.140.30 Orodja za ročno uporabo Hand-operated tools
SIST EN IEC 62841-2-6:2020/A12:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62841-2-6:2020/A12:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 62841-2-6:2020/A12:2024
EUROPEAN STANDARD EN IEC 62841-2-6:2020/A12
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 2-6: Particular
requirements for hand-held hammers
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 2-6: Exigences transportable Werkzeuge und Rasen- und
particulières pour les marteaux portatifs Gartenmaschinen - Sicherheit - Teil 2-6: Besondere
Anforderungen für handgeführte Hämmer
This amendment A12 modifies the European Standard EN IEC 62841-2-6:2020; it was approved by CENELEC on 2023-12-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62841-2-6:2020/A12:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62841-2-6:2020/A12:2024
EN IEC 62841-2-6:2020/A12:2024 (E)
European foreword
This draft amendment (EN IEC 62841-2-6:2020/A12:2024) was prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2024-11-03
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2028-05-03
conflicting with this document have to be
withdrawn
This document modifies by common modifications EN IEC 62841-2-6:2020/A1:2024, which consists of the
text of 116/691/FDIS (future IEC 62841-2-6:2020/A1:2024, Ed. 1.0) prepared by IEC/TC 116 “Safety of
motor-operated electric tools”.
IEC 62841-2-6:2020/A1:2024, Ed. 1.0 introduces various clarifications for subclause 19.102, Annex I and
Annex AA. In addition, subclauses K.21.18.Z101 and L.21.18.Z101 were revised.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
For the relationship with EU Legislation, see informative An
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.