Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection

IEC 60255-151:2009 specifies minimum requirements for over/under current relays. It includes a specification of the protection function, measurement characteristics and time delay characteristics. Defines the influencing factors that affect the accuracy under steady state conditions and performance characteristics during dynamic conditions.

Messrelais und Schutzeinrichtungen - Teil 151: Funktionsanforderungen für Über-/Unterstromschutz

Relais de mesure et dispositifs de protection - Partie 151: Exigences fonctionnelles pour les protections à maximum et minimum de courant

La CEI 60255-151:2009 spécifie les exigences minimales relatives aux relais à maximum/minimum de courant. Cette norme inclut la spécification de la fonction de protection, les caractéristiques de mesure et les caractéristiques de temporisation. Elle définit les facteurs d'influence affectant la précision, en conditions de régime établi et les caractéristiques de performance en conditions dynamiques.

Merilni releji in zaščitna oprema - 151. del: Funkcionalni standard za pod- in nadtokovno zaščito (IEC 60255-151:2009)

Ta del IEC 60255 opredeljuje minimalne zahteve za nad- in podtokovne releje. Ta standard vključuje specifikacijo zaščitne funkcije, lastnosti merjenja in lastnosti časovnega zamika. Ta del IEC 60255 določa dejavnike vplivanja, ki vplivajo na natančnosti v stabilnih pogojih in lastnosti delovanja v dinamičnih pogojih. V ta standard so vključene tudi preskusne metodologije za preverjanje lastnosti delovanja in natančnosti. Ta standard zajema naslednje nad- in podtokovne funkcije: IEEE/ANSI C37.2 IEC 61850-7-4. Funkcija. Števila. Logična vozlišča. Trenutna nadtokovna zaščita 50 PIOC. Zadržana nadtokovna zaščita 51 PTOC. Trenutna zaščita zemeljskih stikov 50N/50G PIOC. Zadržana zaščita zemeljskih stikov 51N/51G PTOC. Nadtokovna zaščita ali zaščita tokovne nestabilnosti negativnega zaporedja 46 PTOC. Podtokovna zaščita 37 PTUC. Od napetosti odvisna nadtokovna zaščita 51V PVOC. Ta standard izključuje termične električne releje, opredeljene v IEC 60255-8. Splošne zahteve za merilne releje in zaščitno opremo opredeljuje IEC 60255-1.

General Information

Status
Published
Publication Date
22-Oct-2009
Withdrawal Date
31-Aug-2012
Current Stage
6060 - Document made available - Publishing
Start Date
23-Oct-2009
Completion Date
23-Oct-2009

Relations

Buy Standard

Standard
EN 60255-151:2010
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60255-151:2010
01-januar-2010
1DGRPHãþD
SIST EN 60255-3:2001
0HULOQLUHOHMLLQ]DãþLWQDRSUHPDGHO)XQNFLRQDOQLVWDQGDUG]DSRGLQ
QDGWRNRYQR]DãþLWR ,(&
Measuring relays and protection equipment -- Part 151: Functional standard for
over/under current protection
Messrelais und Schutzeinrichtungen - Teil 151: Funktionsanforderungen für Über
-/Unterstromschutz
Relais de mesure et dispositifs de protection -- Partie 151: Norme fonctionnelle pour
protection à maximum/minimum de courant
Ta slovenski standard je istoveten z: EN 60255-151:2009
ICS:
29.120.70 Releji Relays
SIST EN 60255-151:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60255-151:2010

---------------------- Page: 2 ----------------------

SIST EN 60255-151:2010

EUROPEAN STANDARD
EN 60255-151

NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM

ICS 29.120.70 Supersedes EN 60255-3:1998 + corr. Jan.1998


English version


Measuring relays and protection equipment -
Part 151: Functional requirements
for over/under current protection
(IEC 60255-151:2009)


Relais de mesure  Messrelais und Schutzeinrichtungen -
et dispositifs de protection - Teil 151: Funktionsanforderungen
Partie 151: Exigences fonctionnelles für Über-/Unterstromschutz
pour les protections à maximum (IEC 60255-151:2009)
et minimum de courant
(CEI 60255-151:2009)




This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60255-151:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60255-151:2010
EN 60255-151:2009 - 2 -
Foreword
The text of document 95/255/FDIS, future edition 1 of IEC 60255-151, prepared by IEC TC 95, Measuring
relays and protection equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60255-151 on 2009-09-01.
This European Standard supersedes EN 60255-3:1998 + corrigendum January 1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
(dow) 2012-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60255-151:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60044 NOTE  Harmonized in EN 60044 series (partially modified).
IEC 60255-8 NOTE  Harmonized as EN 60255-8:1998 (modified).
IEC 61850 NOTE  Harmonized in EN 61850 series (not modified).
IEC 61850-7-4 NOTE  Harmonized as EN 61850-7-4:2003 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 60255-151:2010
- 3 - EN 60255-151:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
app
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.