EN 61076-2-101:2008
(Main)Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
IEC 61076-2-101:2008 describes circular connectors M12 typically used for industrial process measurement and control. These connectors consist of fixed and free connectors with screw-locking. Male connectors have round contacts of diameters 0,6 mm, 0,76 mm, 0,8 mm and 1,0 mm. This new edition includes the following significant technical change with respect to the previous edition: the connector type M8 has been removed from IEC 61076-2-101 and has been published in a separate IEC Standard under reference IEC 61076-2-104.
Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 2-101: Rundsteckverbinder - Bauartspezifikation für Steckverbinder M12 mit Schraubverriegelung
Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-101: Connecteurs circulaires - Spécification particulière pour les connecteurs M12 à vis
La CEI 61076-2-101:2008 décrit les connecteurs circulaires M12 qui sont généralement utilisés pour les dispositifs de mesure et de commande dans les processus industriels. Ces connecteurs se composent d'embases et de fiches et sont équipés d'un système à vis. Les connecteurs mâles possèdent des contacts arrondis de diamètre 0,6 mm, 0,76 mm, 0,8 mm et 1,0 mm. Cette nouvelle édition inclut la modification technique majeure suivante par rapport à l'édition précédente: les connecteurs de type M8 ont été retirés de la CEI 61076-2-101 et ont fait l'objet d'une norme CEI séparée sous la référence CEI 61076-2-104.
Konektorji za elektronsko opremo - Zahteve za izdelek - 2-101. del: Podrobna specifikacija za okrogle konektorje M12 z vijačnim zaklepanjem (IEC 61076-2-101:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2008
.RQHNWRUML]DHOHNWURQVNRRSUHPR=DKWHYH]DL]GHOHNGHO 3RGUREQD
VSHFLILNDFLMD]DRNURJOHNRQHNWRUMH0]YLMDþQLP]DNOHSDQMHP ,(&
Connectors for electronic equipment - Product requirements - Part 2-101: Detail
specification for circular connectors M12 with screw-locking (IEC 61076-2-101:2008)
Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-101:
Connecteurs circulaires - Spécification particulière pour les connecteurs M12 à vis (IEC
61076-2-101:2008)
Connecteurs pour quipements lectroniques - Exigences de produit - Partie 2-101:
Spcification particulire pour les connecteurs circulaires M12 vis (CEI 61076-2-101:2008)
Ta slovenski standard je istoveten z: EN 61076-2-101:2008
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61076-2-101
NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM
ICS 31.220.10 Partially supersedes EN 61076-2-101:2003 + A1:2006
English version
Connectors for electronic equipment -
Product requirements -
Part 2-101: Circular connectors -
Detail specification for M12 connectors with screw-locking
(IEC 61076-2-101:2008)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produit - Produktanforderungen -
Partie 2-101: Connecteurs circulaires - Teil 2-101: Rundsteckverbinder -
Spécification particulière Bauartspezifikation für Steckverbinder
pour les connecteurs M12 à vis M12 mit Schraubverriegelung
(CEI 61076-2-101:2008) (IEC 61076-2-101:2008)
This European Standard was approved by CENELEC on 2008-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-2-101:2008 E
Foreword
The text of document 48B/1893/FDIS, future edition 2 of IEC 61076-2-101, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-2-101 on 2008-08-01.
This European Standard, together with EN 61076-2-104:2008, supersedes EN 61076-2-101:2003 +
A1:2006.
EN 61076-2-101:2003:
– the connector type M8 has been removed from EN 61076-2-101 and has been published in a separate
European Standard under reference EN 61076-2-104;
– the content of Amendment 1 is included in this European Standard;
– mounting thread changed from Pg to metric.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-2-101:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60423 NOTE Harmonized as EN 60423:2007 (not modified).
IEC 61076-2-001 NOTE Harmonized as EN 61076-2-001:2001 (not modified).
__________
– 3 – EN 61076-2-101:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
- - Communication cables - Specifications for EN 50289-1-14 -
test methods -
Part 1-14: Electrical test methods - Coupling
attenuation or screening attenuation of
connecting hardware
1)
IEC 60050-581 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 581: Electromechanical components
for electronic equipment
1) 2)
IEC 60068-1 - Environmental testing - EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60068-2-60 - Environmental testing - EN 60068-2-60 1996
Part 2: Tests - Test Ke: Flowing mixed gas
corrosion test
IEC 60352 Series Solderless connections EN 60352 Series
IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993
1) 2)
IEC 60664-1 - Insulation coordination for equipment within EN 60664-1 2007
low-voltage systems -
Part 1: Principles, requirements and tests
1) 2)
IEC 60998-2-1 - Connecting devices for low-voltage circuits EN 60998-2-1 2004
(mod) for household and similar purposes -
Part 2-1: Particular requirements for
connecting devices as separate entities with
screw-type clamping units
IEC 60999 Series Connecting devices - Electrical copper EN 60999 Series
conductors - Safety requirements for screw-
type and screwless-type clamping units
IEC 61076-1 2006 Connectors for electronic equipment - EN 61076-1 2006
Product requirements -
Part 1: Generic specification
1) 2)
IEC 61984 - Connectors - Safety requirements and tests EN 61984 2001
1)
ISO 1302 - Geometrical Product Specifications (GPS) - - -
Indication of surface texture in technical
product documentation
1)
Undated reference.
2)
Valid edition at date of issue.
Publication Year Title EN/HD Year
1)
DIN 46320 - Screwed glands for cables: general - -
application, dimensions, mounting instructions
IEC 61076-2-101
Edition 2.0 2008-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Product requirements –
Part 2-101: Circular connectors – Detail specification for M12 connectors with
screw-locking
Connecteurs pour équipements électroniques – Exigences de produit –
Partie 2-101: Connecteurs circulaires – Spécification particulière pour les
connecteurs M12 à vis
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XA
CODE PRIX
ICS 31.220.10 ISBN 2-8318-9891-9
– 2 – 61076-2-101 © IEC:2008
CONTENTS
FOREWORD.5
1 General information.8
1.1 Scope.8
1.2 Recommended method of termination .8
1.2.1 Number of contacts or contact cavities .8
1.3 Ratings and characteristics .8
1.4 Normative references .9
1.5 Marking .9
1.6 IEC Type designation .10
1.7 Ordering information.10
1.8 Safety aspects.11
2 Technical information .11
2.1 Terms and definitions .11
2.1.1 Mounting orientation .11
2.2 Survey of styles and variants.11
2.2.1 Fixed connectors .12
2.2.2 Free connectors .19
3 Dimensions .23
3.1 General .23
3.2 Interface dimensions .24
3.2.1 Pin front view A-coding.24
3.2.2 Pin front view B-coding.28
3.2.3 Pin front view C-coding.29
3.2.4 Pin front view D-coding.32
3.2.5 Pin front view P-coding.33
3.3 Engagement (mating) information.34
3.4 Gauges .36
4 Characteristics .37
4.1 Climatic category.37
4.2 Electrical characteristics.37
4.2.1 Rated voltage – Rated impulse voltage – Pollution degree.37
4.2.2 Voltage proof.38
4.2.3 Current-carrying capacity.38
4.2.4 Contact resistance.39
4.2.5 Insulation resistance.39
4.3 Mechanical characteristics .39
4.3.1 IP degree of protection .39
4.3.2 Mechanical operation .39
4.3.3 Insertion and withdrawal forces .39
4.3.4 Contact retention in insert.40
4.3.5 Polarizing method.40
4.3.6 Vibration (sinusoidal).40
5 Test schedule.40
5.1 General .40
5.1.1 Arrangement for contact resistance measurements.41
5.1.2 Arrangement for dynamic stress tests (vibration) .41
61076-2-101 © IEC:2008 – 3 –
5.2 Test schedule.43
5.2.1 Test group P – Preliminary .43
5.2.2 Test group AP – Dynamic/ Climatic.44
5.2.3 Test group BP – Mechanical endurance.47
5.2.4 Test group CP – Electrical load .49
5.2.5 Test group DP – Chemic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.