EN IEC 60794-1-403:2021
(Main)Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3
Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3
IEC 60794-1-403:2021 specifies a method of verifying that cable metallic elements are electrically continuous throughout the cable. Electrical continuity is important for bonding and grounding, toning for location, and other related system issues, and may represent a "goodness of manufacture" criterion. Typically, the test is one of continuity and carries no resistance or conductivity requirement. The metallic elements can be tested individually or can be tested as a total group. Since this latter criterion is frequently the case, all elements are measured as a group unless specified otherwise. NOTE It is possible detail specifications allow such elements as strength members to be non-continuous throughout the cable. This is a special case, and attention is directed to the detail specification.
Lichtwellenleiterkabel - Teil 1-403: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Elektrische Prüfverfahren - Elektrische Durchgangsprüfung von metallischen Kabelelementen, Verfahren H3
Câbles à fibres optiques - Partie 1-403: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais électriques - Essai de continuité électrique des éléments métalliques des câbles, méthode H3
IEC 60794-1-403: 2021 spécifie une méthode permettant de vérifier que les éléments métalliques des câbles assurent la continuité électrique tout au long du câble. La continuité électrique est importante pour les liaisons équipotentielles et les mises à la terre, ainsi que pour la fonction de génération de tonalité permettant de localiser des câbles, et les autres problématiques associées au réseau, et elle peut représenter un critère de "bonne qualité de fabrication". Généralement, l'essai a trait à la continuité et ne comporte aucune exigence de résistance ou de conductivité. Les éléments métalliques peuvent être soumis à essai séparément, ou ils peuvent être tous regroupés pour être soumis à l'essai. Etant donné que cette dernière configuration est fréquente, tous les éléments sont mesurés en groupe, sauf spécification contraire. NOTE Il est possible que les spécifications particulières permettent à des éléments tels que les éléments de renfort d'être non continus tout au long du câble. Il s'agit d'un cas particulier, et l'attention est attirée sur la spécification particulière en question.
Optični kabli - 1-403. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Električne preskusne metode - Preskus neprekinjenosti električnih kovinskih elementov kabla, metoda H3 (IEC 60794-1-403:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2021
Optični kabli - 1-403. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Električne preskusne metode - Preskus neprekinjenosti električnih
kovinskih elementov kabla, metoda H3 (IEC 60794-1-403:2021)
Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test
procedures - Electrical test methods - Electrical continuity test of cable metallic elements,
method H3 (IEC 60794-1-403:2021)
Lichtwellenleiterkabel - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Teil 403:
Elektrische Prüfverfahren - Elektrische Durchgangsprüfungen von metallischen
Kabelelementen, Verfahren H3 (IEC 60794-1-403:2021)
Câbles à fibres optiques - Partie 1-403: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais électriques - Essai de
continuité électrique des éléments métalliques des câbles, méthode H3 (IEC 60794-1-
403:2021)
Ta slovenski standard je istoveten z: EN IEC 60794-1-403:2021
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60794-1-403
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 33.180.10
English Version
Optical fibre cables - Part 1-403: Generic specification - Basic
optical cable test procedures - Electrical test methods - Electrical
continuity test of cable metallic elements, method H3
(IEC 60794-1-403:2021)
Câbles à fibres optiques - Partie 1-403: Spécification Lichtwellenleiterkabel - Grundlegende Prüfverfahren für
générique - Procédures fondamentales d'essais des câbles Lichtwellenleiterkabel - Teil 403: Elektrische Prüfverfahren -
optiques - Méthodes d'essais électriques - Essai de Elektrische Durchgangsprüfungen von metallischen
continuité électrique des éléments métalliques des câbles, Kabelelementen, Verfahren H3
méthode H3 (IEC 60794-1-403:2021)
(IEC 60794-1-403:2021)
This European Standard was approved by CENELEC on 2021-05-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-403:2021 E
European foreword
The text of document 86A/2035/CDV, future edition 1 of IEC 60794-1-403, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-403:2021.
The following dates are fixed:
• latest date by which the document has to be implemented (dop) 2022-02-28
at national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2024-05-31
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60794-1-403:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60794-1-2 NOTE Harmonized as EN IEC 60794-1-2
IEC 60794-1-24:2014 NOTE Harmonized as EN 60794-1-24:2014 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-1 - Optical fibre cables - Part 1-1: Generic EN 60794-1-1 -
specification - General
IEC 60794-1-403 ®
Edition 1.0 2021-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-403: Generic specification – Basic optical cable test procedures –
Electrical test methods – Electrical continuity test of cable metallic elements,
method H3
Câbles à fibres optiques –
Partie 1-403: Spécification générique – Procédures fondamentales d’essais
des câbles optiques – Méthodes d’essais électriques – Essai de continuité
électrique des éléments métalliques des câbles, méthode H3
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-9700-1
– 2 – IEC 60794-1-403:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Sample . 6
5 Apparatus . 6
6 Procedure . 7
7 Requirements . 7
8 Details to be specified . 7
Bibliography . 8
IEC 60794-1-403:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 1-403: Generic specification – Basic optical cable
test procedures – Electrical test methods – Electrical continuity
test of cable metallic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.