EN IEC 62148-1:2018
(Main)Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
IEC 62148-1:2017(E) aims to assure interchangeability in physical interfaces between fibre optic active components and devices supplied by different manufacturers, but it does not guarantee operation between such devices. This second edition cancels and replaces the first edition, published in 2002, and constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: addition of a free space optical coupling interface in Clause 5. Keywords: physical interfaces between fibre optic components
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen - Teil 1: Allgemeines und Leitfaden
Composants et dispositifs actifs fibroniques - Normes de boîtier et d'interface - Partie 1: Généralités et recommandations
IEC 62148-1:2017 vise à assurer l’interchangeabilité des interfaces physiques entre les composants et dispositifs actifs fibroniques fournis par différents fabricants, mais elle ne garantit pas le fonctionnement entre ces mêmes dispositifs. Cette deuxième édition annule et remplace la première édition parue en 2002 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: ajout d'une interface de couplage optique en espace libre à l'Article 5. Mots clés: interfaces physiques entre les composants fibroniques
Aktivne komponente in naprave optičnih vlaken - Standardi za ohišja in vmesnike - 1. del: Splošno in navodila (IEC 62148-1:2017)
Namen tega dela standarda IEC 62148 je zagotoviti medsebojno zamenljivost fizičnih vmesnikov aktivnih komponent in naprav optičnih vlaken, ki jih dobavljajo različni proizvajalci, vendar ne zagotavlja medsebojnega delovanja teh naprav.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2018
1DGRPHãþD
SIST EN 62148-1:2004
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ6WDQGDUGL]DRKLãMDLQYPHVQLNH
GHO 6SORãQRLQQDYRGLOD ,(&
Fibre optic active components and devices - Package and interface standards - Part 1:
General and guidance (IEC 62148-1:2017)
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen -
Teil 1: Allgemeines und Leitfaden (IEC 62148-1:2017)
Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface -
Partie 1: Généralités et lignes directrices (IEC 62148-1:2017)
Ta slovenski standard je istoveten z: EN IEC 62148-1:2018
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62148-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2018
ICS 33.180.01 Supersedes EN 62148-1:2002
English Version
Fibre optic active components and devices - Package and
interface standards - Part 1: General and guidance
(IEC 62148-1:2017)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse-
boîtier et d'interface - Partie 1: Généralités et und Schnittstellennormen - Teil 1: Allgemeines und
recommandations Leitfaden
(IEC 62148-1:2017) (IEC 62148-1:2017)
This European Standard was approved by CENELEC on 2017-10-05. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62148-1:2018 E
European foreword
The text of document 86C/1406A/CDV, future edition 2 of IEC 62148-1, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62148-1:2018.
The following dates are fixed:
(dop) 2018-08-16
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-02-16
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62148-1:2002.
EN 62148-1:2002:
Addition of a free space optical coupling interface in Clause 5.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62148-1:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60130 Series NOTE Harmonized in EN 60130 Series.
IEC 60191 Series NOTE Harmonized in EN 60191 Series.
IEC 60603 Series NOTE Harmonized in EN 60603 Series.
IEC 60603-1 NOTE Harmonized as EN 60603-1.
IEC 60603-2 NOTE Harmonized as EN 60603-2.
IEC 60603-3 NOTE Harmonized as EN 60603-3.
IEC 60603-4 NOTE Harmonized as EN 60603-4.
IEC 60603-5 NOTE Harmonized as EN 60603-5.
IEC 60603-6 NOTE Harmonized as EN 60603-6.
IEC 60603-7 NOTE Harmonized as EN 60603-7.
IEC 60603-8 NOTE Harmonized as EN 60603-8.
IEC 60603-12 NOTE Harmonized as EN 60603-12.
IEC 60603-13 NOTE Harmonized as EN 60603-13.
IEC 60603-14 NOTE Harmonized as EN 60603-14.
IEC 60793 Series NOTE Harmonized in EN 60793 Series.
IEC 60874 Series NOTE Harmonized in EN 60874 Series.
IEC 61076 Series NOTE Harmonized in EN 61076 Series.
IEC 61300 Series NOTE Harmonized in EN 61300 Series.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60191-1 - Mechanical standardization of EN 60191-1 -
semiconductor devices -
Part 1: General rules for the preparation of
outline drawings of discrete devices
IEC 60794 Series Optical fibre cables EN 60794 Series
IEC 61754 Series Fibre optic interconnecting devices and EN 61754 Series
passive components - Fibre optic
connector interfaces
IEC 62148 Series Fibre optic active components EN 62148 Series
and devices - Package and interface
standards
ISO 1101 - Geometrical product specifications (GPS) - EN ISO 1101 -
- Geometrical tolerancing - Tolerances of
form, orientation, location and run-out
IEC 62148-1 ®
Edition 2.0 2017-08
INTERNATIONAL
STANDARD
Fibre optic active components and devices – Package and interface standards –
Part 1: General and guidance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.01 ISBN 978-2-8322-4803-4
– 2 – IEC 62148-1:2017 © IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Classification . 7
5 Specifications of optical interfaces . 7
5.1 General . 7
5.2 Optical connector interfaces (types 1 and 2) . 7
5.3 Pigtail interfaces (types 3 and 4) . 8
5.4 Free space optical coupling interface (types 5 and 6) . 8
5.5 Optical port assignments . 8
6 Specifications of electrical interfaces . 8
6.1 General . 8
6.2 Electrical connector interfaces (types 2, 4 and 6) . 8
6.3 Non-connector type interfaces (types 1, 3 and 5) . 8
6.4 Numbering of electrical terminals . 8
6.5 Electrical terminal assignment . 8
7 Outline and footprint of active components and devices . 9
7.1 Drawings of case outline . 9
7.2 Drawings of footprint . 9
7.3 Mechanical fixturing . 9
Bibliography . 10
IEC 62148-1:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –
Part 1: General and guidance
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62148-1 has been prepared by subcommittee 86C: Fibre optic
systems and active devices, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition, published in 2002, and constitutes
a technical revision.
This edition includes the following significant technical change with respect to the previous
edition: addition of a free space optical coupling interface in Clause 5.
– 4 – IEC 62148-1:2017 © IEC 2017
The text of this International Standard is based on the following documents:
CDV Report on voting
86C/1406A/CDV 86C/1466/RVC
Full information on the voting for the approval of this Inter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.