OPC unified architecture - Part 5: Information Model

IEC 62541-5.2015 defines the Information Model of the OPC Unified Architecture. The Information Model describes standardised Nodes of a Server's AddressSpace. These Nodes are standardised types as well as standardised instances used for diagnostics or as entry points to server-specific Nodes. This second edition cancels and replaces the first edition published in 2011 and constitutes a technical revision. This edition includes the following changes: - Defined ProgressEventType; - Defined DataType called BitFieldMaskDataType; - Delete Property SamplingRateCount in ServerDiagnosticSummaryDataType; - Added the Property "EffectiveTransitionTime" to TransitionVariableType; - Introduced VariableType OptionSetType; - Added a new EventType called SystemStatusChangeEventType; - Added properties to ServerCapabilitiesType. Added an object for operation limits. Added type OperationLimitsType containing that information; - Added SecureChannelId to AuditActivateSessionEventType; - Added normative Annex C defining FileType and Methods; - Added a Method GetMonitoredItems on ServerType; - Removed the concept of ModelParent. Added meta data for namespaces in ServerType and created types for managing that. Added representations for ModellingRules OptionalPlaceholder and MandatoryPlaceholder; - Added new types NonTransparentNetworkRedundancyType, NetworkGroupDataType and EndpointUrlListDataType.

OPC Unified Architecture - Teil 5: Informationsmodell

Architecture unifiée OPC - Partie 5: Modèle d'informations

L'IEC 62541-5:2015 définit le Modèle d'informations de l'Architecture unifiée OPC. Le Modèle d'informations décrit des Noeuds (Nodes) normalisés d'un Espace d'Adresses (AddressSpace) d'un Serveur (Server). Ces Noeuds sont des types normalisés ainsi que des instances normalisées utilisés pour le diagnostic ou comme des points d'entrée à des Noeuds spécifiques au serveur. Cette deuxième édition annule et remplace la première édition parue en 2011. Elle constitue une révision technique. Cette édition inclut les modifications suivantes: - ProgressEventType identifiant l'avancement d'une opération telle que l'appel d'un service; - DataType appelé BitFieldMaskDataType; - Propriété SamplingRateCount supprimée dans le ServerDiagnosticSummaryDataType; - Ajout de la propriété "EffectiveTransitionTime" au TransitionVariableType; - Introduction du VariableType OptionSetType; - Ajout d'un nouveau EventType appelé SystemStatusChangeEventType; - Ajout de propriétés à ServerCapabilitiesType, de même qu'ajout d'un objet pour les limites de fonctionnement. Ajout du type OperationLimitsType; - Ajout de SecureChannelId à AuditActivateSession-EventType; - Ajout d'une Annexe C normative définissant le FileType et les Méthodes utilisés pour le transfert de fichiers; - Ajout d'une Méthode GetMonitoredItems à ServerType; - Suppression du concept de ModelParent; - Ajout de métadonnées pour les espaces de noms dans ServerType. Ajout des représentations pour les ModellingRules OptionalPlaceholder et MandatoryPlaceholder; - Ajout des nouveaux types NonTransparentNetworkRedundancyType, NetworkGroupDataType et EndpointUrlListDataType afin de gérer la redondance HotAndMiorrored. Ajout d'une description supplémentaire de la redondance et mise à jour de l'énumération RedundancySupport en 12.5.

Enotna arhitektura OPC - 5. del: Informacijski model (IEC 62541-5:2015)

Ta del standarda IEC 62541 določa informacijski model enotne arhitekture OPC. Informacijski model opisuje standardizirana vozlišča strežnikovega naslovnega prostora. Ta vozlišča so standardizirane vrste in primerki, ki se uporabljajo za diagnostiko ali kot vstopne točke v strežniška vozlišča. Informacijski model tako določi naslovni prostor praznega strežnika enotne arhitekture OPC. Vendar se ne pričakuje, da bodo vsi strežniki zagotovili vsa vozlišča.

General Information

Status
Withdrawn
Publication Date
28-May-2015
Withdrawal Date
28-Apr-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
14-Aug-2023
Completion Date
14-Aug-2023

Relations

Buy Standard

Standard
EN 62541-5:2015 - BARVE
English language
122 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62541-5:2015
01-oktober-2015
1DGRPHãþD
SIST EN 62541-5:2012
Enotna arhitektura OPC - 5. del: Informacijski model (IEC 62541-5:2015)
OPC Unified Architecture -- Part 5: Information Model (IEC 62541-5:2015)
OPC unified architecture - Part 5: Information Model (IEC 62541-5:2015)
Architecture unifiée OPC - Partie 5: Modèle d'informations (IEC 62541-5:2015)
Ta slovenski standard je istoveten z: EN 62541-5:2015
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62541-5:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62541-5:2015

---------------------- Page: 2 ----------------------

SIST EN 62541-5:2015


EUROPEAN STANDARD EN 62541-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 25.040.40; 35.100 Supersedes EN 62541-5:2011
English Version
OPC unified architecture - Part 5: Information Model
(IEC 62541-5:2015)
Architecture unifiée OPC - Partie 5: Modèle d'informations OPC Unified Architecture - Teil 5: Informationsmodell
(IEC 62541-5:2015) (IEC 62541-5:2015)
This European Standard was approved by CENELEC on 2015-04-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62541-5:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62541-5:2015
EN 62541-5:2015 - 2 -
Foreword
The text of document 65E/376/CDV, future edition 2 of IEC 62541-5, prepared by SC 65E "Devices
and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62541-5:2015.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2016-01-29
national level by publication of an identical national
standard or by endorsement
(dow) 2018-04-29
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 62541-5:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
Endorsement notice
The text of the International Standard IEC 62541-5:2015 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62541-5:2015
- 3 - EN 62541-5:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.