EN 61158-4-14:2012

Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements

2012-03-22 - Publication editing allocated to [e-mail] * Project handled under parallel procedures as FprEN 61158-400 and split into 9 subparts to be published as EN 61158-4-2, 3, 11, 12, 14, 18, 19, 21 and 22 * Supersedes EN 61158-4-14:2008

Industrielle Kommunikationsnetze - Feldbusse - Teil 4-14: Protokollspezifikation des Data Link Layer (Sicherungsschicht) - Typ 14-Elemente

Réseaux de communication industriels - Spécifications de bus de terrain - Partie 4-14: Spécification du protocole de couche de liaison de données - Eléments de Type 14

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-14. del: Specifikacija protokola na nivoju podatkovnih povezav - Elementi tipa 14 (IEC 61158-4-14:2010)

Nivo podatkovnih povezav omogoča osnovne časovno kritične sporočilne komunikacije med napravami v avtomatizacijskem okolju. Ta protokol omogoča komunikacijske priložnosti vsem sodelujočim entitetam podatkovnih povezav a) na cikličen način s sinhronim začetkom v skladu z vnaprej določenim razporedom in b) na cikličen ali necikličen asinhron način, kot posamezne entitete podatkovnih povezav zahtevajo v vsakem ciklu. Tako lahko ta protokol opredelimo kot protokol, ki asinhrono omogoča cikličen in acikličen dostop s sinhronim ponovnim zagonom vsakega cikla.

General Information

• Status: Withdrawn
• Publication Date: 24-May-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.20 - Data link layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Sep-2017
• Completion Date: 19-Sep-2017
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-4-14:2012 - Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements (IEC 61158-4-14:2010)

Relations

• Replaces: EN 61158-4-14:2008 - Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements
• Effective Date: 28-Jan-2023
• Replaced By: EN 61158-4-14:2014 - Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements
• Effective Date: 04-Nov-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2012
1DGRPHãþD
SIST EN 61158-4-14:2008
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 4-14. del:
Specifikacija protokola na nivoju podatkovnih povezav - Elementi tipa 14 (IEC
61158-4-14:2010)
Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer
protocol specification - Type 14 elements (IEC 61158-4-14:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 4-14: Protokollspezifikation des
Data Link Layer (Sicherungsschicht) - Typ 14-Elemente (IEC 61158-4-14:2010)
Réseaux de communication industriels - Spécifications de bus de terrain - Partie 4-14:
Spécification du protocole de couche de liaison de données - Eléments de Type 14 (CEI
61158-4-14:2010)
Ta slovenski standard je istoveten z: EN 61158-4-14:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.20 Podatkovni povezovalni sloj Data link layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-4-14
NORME EUROPÉENNE
May 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.20; 35.110 Supersedes EN 61158-4-14:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 4-14: Data-link layer protocol specification -
Type 14 elements
(IEC 61158-4-14:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications de bus de terrain - Feldbusse -
Partie 4-14: Spécification du protocole de Teil 4-14: Protokollspezifikation des Data
couche de liaison de données - Link Layer (Sicherungsschicht) -
Eléments de Type 14 Typ 14-Elemente
(CEI 61158-4-14:2010) (IEC 61158-4-14:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-4-14:2012 E
Foreword
The text of document 65C/605/FDIS, future edition 2 of IEC 61158-4-14, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-4-14:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-4-14:2008.
14:2008:
 Provide stability date for the publication;
 Update the Normative references and Bibliography;
 Corrections of the edit error;
 Specification changes for CPF3;
– update of the requirements for all conformance classes;
– update of the requirements for all conformance services.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-4-14:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158-3-14:2010 NOTE  Harmonized as EN 61158-3-14:2012 (not modified).
IEC 61158-6-14:2010 NOTE  Harmonized as EN 61158-6-14:2012 (not modified).
IEC 61784-2:2010 NOTE  Harmonized as EN 61784-2:2010 (not modified).

- 3 - EN 61158-4-14:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC/TR 61158-1 2010 Industrial communication networks - Fieldbus CLC/TR 61158-1 2010
specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series

IEC 61158-5-14 2010 Industrial communication networks - Fieldbus EN 61158-5-14 2012
specifications -
Part 5-14: Application layer service definition -
Type 14 elements
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model: The
Basic Model
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
ISO/IEC 8802-3 - Information technology - Telecommunications - -
and information exchange between systems -
Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications

ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

IETF RFC 791 - Internet Protocol - DARPA Internet Program - -
Protocol Specification
IETF RFC 768 - User Datagram Protocol - -

IEC 61158-4-14 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 4-14: Data-link layer protocol specification – Type 14 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 25.04.40; 35.100.20; 35.110 ISBN 978-2-88912-088-8
– 2 – 61158-4-14 © IEC:2010(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
1.1 General .7
1.2 Specifications.7
1.3 Procedures.7
1.4 Applicability.8
1.5 Conformance.8
2 Normative references .8
3 Terms, definitions, symbols and abbreviations.8
3.1 Reference model terms and definitions.9
3.2 Service convention terms and definitions.11
3.3 ISO/IEC 8802-3 terms .11
3.4 Common terms and definitions .12
3.5 Symbols and abbreviations.15
4 Overview of the DL-protocol .16
4.1 General .16
4.2 Services provided by the DL.17
4.3 Structure of deterministic communication scheduling.18
5 Procedure of deterministic communication scheduling .19
5.1 Overview .19
5.2 State transitions .20
5.3 State table.22
5.4 Function descriptions .23
6 Structure and encoding of ECSME PDU .27
6.1 ECSME PDU structure .27
6.2 Encoding of ECSME packet.29
Bibliography.32

Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses .13
Figure 2 – Communication model.16
Figure 3 – Type 14 packet identifier .18
Figure 4 – Time-sharing communication scheduling .18
Figure 5 – State transitions of ECSME.20
Figure 6 – Format of NonPeriodicDataAnnunciation PDU.27
Figure 7 – Format of EndofNonPeriodicDataSending PDU .28
Figure 8 – Format of Type 14 PDU.28
Figure 9 – Format of Type 14 PDU for FRT application .28

Table 1 – ECSME state transitions.22
Table 2 – NonperiodicDataSendingSuc() description.23
Table 3 – NonperiodicDataAnnunciation() description .23
Table 4 – NonperiodicDataSending() description .23
Table 5 – NonperiodicDataSendingSuc() description.24

61158-4-14 © IEC:2010(E) – 3 –
Table 6 – FirstNonperiodicDataSending() description.24
Table 7 – NonperiodicDataPriority() description .24
Table 8 – NonperiodicDataTimeEnough() description.25
Table 9 – NonperiodicDataSending() description .25
Table 10 – EndOfNonperiodicDataSending() description.25
Table 11 – IsDeviceConfigured() description.26
Table 12 – CountOffsetTime() description.26
Table 13 – DataSendingTiming() description.26
Table 14 – RecEndofNonPeriodicDataSending() description .26
Table 15 – NonPeriodicDataAnnunciation message encoding .29
Table 16 – EndofNonPeriodicDataSending message encoding.30
Table 17 – Type 14 DL-management Tag encoding .30
Table 18 – Type 14 message encoding .31
Table 19 – Type 14 message for FRT application encoding .31

– 4 – 61158-4-14 © IEC:2010(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_
...