EN 45510-6-3:1998
(Main)Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant
Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant
This standard gives guidance on writing the technical specification for the procurement of condenser plants for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 6-3: Turbinenhilfseinrichtungen - Kondensationsanlage
Die vorliegende Norm ist eine Anleitung zur Erstellung der technischen Spezifikation für die Beschaffung von Kondensationsanlagen für den Einsatz in Anlagen zur Erzeugung von elektrischer Energie (Kraftwerke). Dieser Leitfaden ist nicht anwendbar auf Ausrüstung zur Verwendung im Nuklearbereich von Kernkraftwerken. Bei der Erstellung des Leitfadens wurden keine weiteren Möglichkeiten zur Anwendung der beschriebenen Ausrüstung in Betracht gezogen.
Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 6-3: Auxiliaires de turbine - Installation de condensation
La présente norme donne des recommandations pour la rédaction de la spécification technique nécessaire à l'acquisition d'installations de condensation pour les centrales de production d'electricité. Ce guide d'achat n'est pas applicable à ce type d'équipement lorsque celui-ci est destiné à l'îlot nucléaire des centrales nucléaires. D'autres applications possibles de ce type d'équipement n'ont pas été prises en considération dans la préparation de ce guide.
Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant
General Information
Overview
EN 45510-6-3:1998 - Guide for procurement of power station equipment, Part 6-3: Turbine auxiliaries - Condenser plant is a CLC (European) guide that helps users prepare clear, effective technical specifications for condenser plants used in electricity generating stations. The standard is focused on procurement documentation for condenser plant equipment associated with turbine auxiliaries and is not applicable to equipment intended for the nuclear reactor plant area of nuclear power stations. Other non-power-station applications were not considered in the preparation of this Guide.
Key topics and requirements
This procurement guide provides practical guidance rather than prescriptive technical rules. Key topics typically covered include:
- Scope and purpose of a condenser plant within turbine auxiliaries for power stations (steam and gas/steam turbine contexts).
- Specification structure recommendations to define performance, materials, interfaces and required documentation.
- Performance and operational requirements to specify thermal capacity, vacuum/condensing conditions and efficiency targets (guidance for how to describe these in procurement documents).
- Design and construction considerations such as mechanical layout, materials selection and corrosion-resistant components (how to frame requirements in contracts).
- Testing, inspection and acceptance - guidance on factory and site tests, inspection criteria and acceptance procedures to include in tenders.
- Installation, commissioning and handover documentation - recommended deliverables, drawings, spares lists and maintenance instructions.
- Safety, interfaces and regulatory compliance - guidance on specifying interfaces with turbines, auxiliaries and plant safety/plant integration requirements. Note: the Guide is intended to assist specification writers; it does not replace applicable regulatory or nuclear-specific standards.
Applications and users
Who uses EN 45510-6-3:1998:
- Procurement and specification engineers preparing tender documents for condenser plant purchases.
- Plant designers and consulting engineers defining performance and interface requirements for turbine auxiliaries.
- Equipment manufacturers and suppliers responding to tenders and preparing technical offers.
- Operations, commissioning and maintenance teams who rely on clear contractual documentation for acceptance and ongoing support.
Primary applications:
- Writing technical specifications for condenser plants in electricity generating stations (conventional steam cycles, combined-cycle plants where applicable to condenser auxiliaries).
- Defining contract requirements for design, testing, delivery, installation and documentation.
Related standards
- Part of the EN 45510 series (power station equipment procurement guides).
- Users should combine this Guide with applicable national, safety and environmental standards and with any sector-specific standards for nuclear installations (this Guide explicitly excludes nuclear reactor plant area equipment).
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plantLeitfaden für die Beschaffung von Ausrüstungen für Kraftwerke -- Teil 6-3: Turbinenhilfseinrichtungen - KondensationsanlagenGuide pour l'acquisition d'équipements destinés aux centrales de production d'électricité -- Partie 6-3: Auxiliaires de turbine - Installation de condensationGuide for procurement of power station equipment -- Part 6-3: Turbine auxiliaries - Condenser plant27.100Elektrarne na splošnoPower stations in general27.040Plinske in parne turbine. Parni strojiGas and steam turbines. Steam enginesICS:Ta slovenski standard je istoveten z:EN 4
...
Frequently Asked Questions
EN 45510-6-3:1998 is a standard published by CLC. Its full title is "Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant". This standard covers: This standard gives guidance on writing the technical specification for the procurement of condenser plants for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
This standard gives guidance on writing the technical specification for the procurement of condenser plants for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.
EN 45510-6-3:1998 is classified under the following ICS (International Classification for Standards) categories: 27.040 - Gas and steam turbines. Steam engines; 27.100 - Power stations in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 45510-6-3:1998 is associated with the following European legislation: EU Directives/Regulations: 93/38/EEC; Standardization Mandates: M/BC/CEN/92/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 45510-6-3:1998 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...