EN IEC 61753-082-02:2024
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category C - Indoor controlled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category C - Indoor controlled environment
IEC 61753-082-02:2024 contains the minimum initial test, measurement requirements and severities which a fibre optic 1,31/1,55 µm wide wavelength division multiplexing (WWDM) device satisfies in order to be categorised as meeting the requirements of category C (indoor controlled environment), as defined in IEC 61753-1:2018, Annex A. WWDM is defined in IEC 62074-1. This first edition cancels and replaces the first edition of IEC 61753-082-2 published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) change of test conditions harmonizing with IEC 61753-1.
Lichtwellenleiter - Verbindungselemente und passive Bauelemente - Betriebsverhalten - Teil 082-02: Pigtailed-Einmoden-Lichtwellenleiter 1,31/1,55 µm WWDM-Geräte für die Kategorie C - Kontrollierte Innenraumumgebung
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 082-02: Dispositifs WWDM 1,31 µm/1,55 µm fibroniques équipées d'une fibre amorce pour la catégorie C - Environnement intérieur contrôlé
IEC 61753-082-02: 2024 contient les exigences minimales initiales d’essai et de mesure, ainsi que les sévérités auxquelles un dispositif fibronique de multiplexage par répartition en longueur d’onde large (WWDM, Wide Wavelength Division Multiplexing) 1,31 µm/1,55 µm est tenu de satisfaire pour être classé comme étant conforme aux exigences de la catégorie C (environnement intérieur contrôlé), selon la définition donnée dans l’IEC 61753‑1:2018, Annexe A. Le protocole WWDM est défini dans l’IEC 62074-1. Cette première édition annule et remplace la première édition de l’IEC 61753-082-2 parue en 2008 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) modification des conditions d'essai pour harmonisation avec l’IEC 61753-1.
Optični spojni elementi in pasivne komponente - Tehnični standard - 082-02. del: Naprave WWDM (širokopasovni multipleks) s priključenim enorodovnim optičnim vlaknom 1,31/1,55 µm za kategorijo C - Notranje nadzorovano okolje (IEC 61753-082-02:2024)
Standard IEC 61753-082-02:2024 vsebuje minimalne zahteve in stopnje zahtevnosti glede začetnega preskusa ter meritev, ki jih mora izpolnjevati naprava za širokopasovni valovni multipleks (WWDM) iz optičnih vlaken s premerom 1,31/1,55 µm, da ustreza zahtevam kategorije C (nadzorovano notranje okolje), kot je opredeljeno v standardu IEC 61753-1:2018, dodatek A. Naprava za širokopasovni valovni multipleks je opredeljena v standardu IEC 62074-1. Ta prva izdaja razveljavlja in nadomešča prvo izdajo standarda IEC 61753-082-2, objavljeno leta 2008. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) sprememba preskusnih pogojev v skladu s standardom IEC 61753-1.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Optični spojni elementi in pasivne komponente - Tehnični standard - 082-02. del:
Naprave WWDM (širokopasovni multipleks) s svitkastim enorodovnim optičnim
vlaknom 1,31/1,55 µm za kategorijo C - Notranje nadzorovano okolje (IEC 61753-
082-02:2024)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category
C - Indoor controlled environment (IEC 61753-082-02:2024)
Lichtwellenleiter - Verbindungselemente und passive Bauelemente - Betriebsverhalten -
Teil 082-02: Pigtailed-Einmoden-Lichtwellenleiter 1,31/1,55 µm WWDM-Geräte für die
Kategorie C - Kontrollierte Innenraumumgebung (IEC 61753-082-02:2024)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 082-02: Dispositifs WWDM 1,31 µm/1,55 µm fibroniques équipées d'une fibre
amorce pour la catégorie C - Environnement intérieur contrôlé (IEC 61753-082-02:2024)
Ta slovenski standard je istoveten z: EN IEC 61753-082-02:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61753-082-02
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 33.180.10
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 082-02: Pigtailed single-mode fibre
optic 1,31/1,55 µm WWDM devices for category C - Indoor
controlled environment
(IEC 61753-082-02:2024)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 082-02: Bauelemente - Betriebsverhalten - Teil 082-02: Pigtailed-
Dispositifs WWDM 1,31 µm/1,55 µm fibroniques équipées Einmoden-Lichtwellenleiter 1,31/1,55 µm WWDM-Geräte
d'une fibre amorce pour la catégorie C - Environnement für die Kategorie C - Kontrollierte Innenraumumgebung
intérieur contrôlé (IEC 61753-082-02:2024)
(IEC 61753-082-02:2024)
This European Standard was approved by CENELEC on 2024-05-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-082-02:2024 E
European foreword
The text of document 86B/4867/FDIS, future edition 1 of IEC 61753-082-02, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-082-
02:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-02-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-05-22
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-082-02:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300 series NOTE Approved as EN 61300 series
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
cables - Family specification for simplex
and duplex cables for use in terminated
cable assemblies
IEC 61300-1 2022 Fibre optic interconnecting devices and EN IEC 61300-1 2022
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
+ AMD1 2024 + A1 2024
IEC 61300-2-1 - Fibre optic interconnecting devices and EN IEC 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN IEC 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN IEC 61300-2-14 -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN IEC 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN IEC 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices and components
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examination and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN IEC 61300-3-7 -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures - Part 3-29:
Examinations and measurements -
Spectral transfer characteristics of DWDM
devices
IEC 61753-1 2018 Fibre optic interconnecting devices and EN IEC 61753-1 2018
passive components - Performance
standard - Part 1: General and guidance
- - + AC 2019-06
+ AMD1 2020 + A1 2020
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices - Part 1: Generic specification
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices
IEC 61753-082-02 ®
Edition 1.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for
category C – Indoor controlled environment
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 082-02: Dispositifs WWDM 1,31 µm/1,55 µm fibroniques équipées d'une
fibre amorce pour la catégorie C – Environnement intérieur contrôlé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-8704-0
– 2 – IEC 61753-082-02:2024 © IEC 2024
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test . 6
5 Test report . 7
6 Performance requirements. 7
6.1 Reference components . 7
6.2 Dimensions . 7
6.3 Sample size . 7
6.4 Test details and requirements . 8
Annex A (normative) Sample size . 13
Bibliography . 14
Table 1 – Single-mode spectral bands . 7
Table 2 – Operating wavelength range . 7
Table 3 – Test details and requirements for category C . 8
Table A.1 – Sample size of tests . 13
IEC 61753-082-02:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM
devices for category C – Indoor controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental
...
SLOVENSKI STANDARD
01-julij-2024
Optični spojni elementi in pasivne komponente - Tehnični standard - 082-02. del:
Naprave WWDM (širokopasovni multipleks) s priključenim enorodovnim optičnim
vlaknom 1,31/1,55 µm za kategorijo C - Notranje nadzorovano okolje (IEC 61753-
082-02:2024)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for category
C - Indoor controlled environment (IEC 61753-082-02:2024)
Lichtwellenleiter - Verbindungselemente und passive Bauelemente - Betriebsverhalten -
Teil 082-02: Pigtailed-Einmoden-Lichtwellenleiter 1,31/1,55 µm WWDM-Geräte für die
Kategorie C - Kontrollierte Innenraumumgebung (IEC 61753-082-02:2024)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 082-02: Dispositifs WWDM 1,31 µm/1,55 µm fibroniques équipées d'une fibre
amorce pour la catégorie C - Environnement intérieur contrôlé (IEC 61753-082-02:2024)
Ta slovenski standard je istoveten z: EN IEC 61753-082-02:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61753-082-02
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 33.180.10
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 082-02: Pigtailed single-mode fibre
optic 1,31/1,55 µm WWDM devices for category C - Indoor
controlled environment
(IEC 61753-082-02:2024)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 082-02: Bauelemente - Betriebsverhalten - Teil 082-02: Pigtailed-
Dispositifs WWDM 1,31 µm/1,55 µm fibroniques équipées Einmoden-Lichtwellenleiter 1,31/1,55 µm WWDM-Geräte
d'une fibre amorce pour la catégorie C - Environnement für die Kategorie C - Kontrollierte Innenraumumgebung
intérieur contrôlé (IEC 61753-082-02:2024)
(IEC 61753-082-02:2024)
This European Standard was approved by CENELEC on 2024-05-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-082-02:2024 E
European foreword
The text of document 86B/4867/FDIS, future edition 1 of IEC 61753-082-02, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-082-
02:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-02-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-05-22
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-082-02:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300 series NOTE Approved as EN 61300 series
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
cables - Family specification for simplex
and duplex cables for use in terminated
cable assemblies
IEC 61300-1 2022 Fibre optic interconnecting devices and EN IEC 61300-1 2022
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
+ AMD1 2024 + A1 2024
IEC 61300-2-1 - Fibre optic interconnecting devices and EN IEC 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN IEC 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN IEC 61300-2-14 -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN IEC 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN IEC 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices and components
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examination and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN IEC 61300-3-7 -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures - Part 3-29:
Examinations and measurements -
Spectral transfer characteristics of DWDM
devices
IEC 61753-1 2018 Fibre optic interconnecting devices and EN IEC 61753-1 2018
passive components - Performance
standard - Part 1: General and guidance
- - + AC 2019-06
+ AMD1 2020 + A1 2020
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices - Part 1: Generic specification
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices
IEC 61753-082-02 ®
Edition 1.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM devices for
category C – Indoor controlled environment
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 082-02: Dispositifs WWDM 1,31 µm/1,55 µm fibroniques équipées d'une
fibre amorce pour la catégorie C – Environnement intérieur contrôlé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-8704-0
– 2 – IEC 61753-082-02:2024 © IEC 2024
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test . 6
5 Test report . 7
6 Performance requirements. 7
6.1 Reference components . 7
6.2 Dimensions . 7
6.3 Sample size . 7
6.4 Test details and requirements . 8
Annex A (normative) Sample size . 13
Bibliography . 14
Table 1 – Single-mode spectral bands . 7
Table 2 – Operating wavelength range . 7
Table 3 – Test details and requirements for category C . 8
Table A.1 – Sample size of tests . 13
IEC 61753-082-02:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 µm WWDM
devices for category C – Indoor controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-government
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.