prEN IEC 62282-3-201:2023

Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems

Brennstoffzellentechnologien - Teil 3-201: Stationäre Brennstoffzellen-Energiesysteme - Leistungskennwerteprüfverfahren für kleine Brennstoffzellen-Energiesysteme

Technologies des piles à combustible - Partie 3-201: Systèmes à piles à combustible stationnaires - Méthodes d'essai des performances pour petits systèmes à piles à combustible

Tehnologije gorivnih celic - 3-201. del: Nepremični elektroenergetski sistemi z gorivnimi celicami - Metode za preskušanje zmogljivosti majhnih elektroenergetskih sistemov z gorivnimi celicami

General Information

• Status: Not Published
• Publication Date: 16-Jun-2025
• ICS: 27.070 - Fuel cells
• Technical Committee: CLC/SR 105 - Fuel cell technologies
• Drafting Committee: IEC/TC 105 - IEC_TC_105
• Current Stage: 4060 - Enquiry results established and sent to TC, SR, BTTF - Enquiry
• Start Date: 16-Feb-2024
• Completion Date: 16-Feb-2024
• Ref Project: oSIST prEN IEC 62282-3-201:2024 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems

Relations

• Revises: EN 62282-3-201:2017/A1:2022 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
• Effective Date: 14-Jun-2022
• Revises: EN 62282-3-201:2017 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
• Effective Date: 14-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2024
Tehnologije gorivnih celic - 3-201. del: Nepremični elektroenergetski sistemi z
gorivnimi celicami - Metode za preskušanje zmogljivosti majhnih
elektroenergetskih sistemov z gorivnimi celicami
Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test
methods for small fuel cell power systems
Brennstoffzellentechnologien - Teil 3-201: Stationäre Brennstoffzellen-Energiesysteme -
Leistungskennwerteprüfverfahren für kleine Brennstoffzellen-Energiesysteme
Technologies des piles à combustible - Partie 3-201: Systèmes à piles à combustible
stationnaires - Méthodes d'essai des performances pour petits systèmes à piles à
combustible
Ta slovenski standard je istoveten z: prEN IEC 62282-3-201:2023
ICS:
27.070 Gorilne celice Fuel cells
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

105/1012/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62282-3-201 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-11-24 2024-02-16
SUPERSEDES DOCUMENTS:
105/975/CD, 105/989A/CC
IEC TC 105 : FUEL CELL TECHNOLOGIES
SECRETARIAT: SECRETARY:
Germany Mr David Urmann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses to
be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC clauses.
(See AC/22/2007 or new GUIDANCE DOC).

TITLE:
Fuel cell technologies – Part 3-201: Stationary fuel cell power systems – Performance test methods for small
fuel cell power systems
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

CDV IEC 62282-3-201 © IEC 2023 – 2 –
CONTENTS
CONTENTS . 2
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
4 Symbols . 15
5 Configuration of small stationary fuel cell power system . 21
6 Reference conditions . 21
7 Heating value base . 21
8 Test preparation . 22
8.1 General . 22
8.2 Uncertainty analysis . 22
8.3 Data acquisition plan . 22
9 Test set-up . 22
10 Instruments and measurement methods . 24
10.1 General . 24
10.2 Measurement instruments . 24
10.3 Measurement points. 25
10.4 Minimum required measurement systematic uncertainty . 27
11 Test conditions . 27
11.1 Laboratory conditions. 27
11.2 Installation and operating conditions of the system . 27
11.3 Power source conditions . 27
11.4 Test fuel . 28
12 Operating process . 28
13 Test plan . 30
14 Type tests on electric and thermal performance . 31
14.1 General . 31
14.2 Fuel consumption test . 31
14.2.1 Gaseous fuel consumption test . 31
14.2.2 Liquid fuel consumption test . 34
14.3 Electric power output test . 35
14.3.1 General . 35
14.3.2 Test method . 35
14.3.3 Calculation of average net electric power output . 36
14.4 Heat recovery test . 36
14.4.1 General . 36
14.4.2 Test method . 36
14.4.3 Calculation of average recovered thermal power . 37
14.5 Start-up test . 38
14.5.1 General . 38
14.5.2 Determination of state of charge of the battery . 38

– 3 – CDV IEC 62282-3-201:Ed.3 © IEC 202X
14.5.3 Test method . 38
14.5.4 Calculation of results . 41
14.6 Ramp-up test . 43
14.6.1 General . 43
14.6.2 Test method . 43
14.6.3 Calculation of results . 43
14.7 Storage state test . 44
14.7.1 General . 44
14.7.2 Test method . 44
14.7.3 Calculation of average electric power input in storage state . 44
14.8 Electric power output change test . 45
14.8.1 General . 45
14.8.2 Test method . 45
14.8.3 Calculation of electric power output change rate . 46
14.9 Shutdown test . 47
14.9.1 General . 47
14.9.2 Test method . 47
14.9.3 Calculation of results . 48
14.10 Computation of efficiency . 49
14.10.1 General . 49
14.10.2 Electrical efficiency . 49
14.10.3 Heat recovery efficiency . 49
14.10.4 Overall energy efficiency . 50
14.11 Rated operation cycle efficiency. 50
14.11.1 General . 50
14.11.2 Calculation of the operation cycle fuel energy input . 50
14.11.3 Calculation of the operation cycle net electric energy output . 51
14.11.4 Calculation of the operation cycle electrical efficiency . 52
14.12 Electromagnetic compatibility (EMC) test . 52
14.12.1 General requirement . 52
14.12.2 Electrostatic discharge immunity test . 53
14.12.3 Radiated, radio-frequency, electromagnetic field immunity test . 53
14.12.4 Electrical fast transient/burst immunity test . 53
14.12.5 Surge immunity test . 53
14.12.6 Immunity test of conducted disturbances induced by radio-frequency

fields . 53
14.12.7 Power frequency magnetic field immunity test . 53
14.12.8 Voltage dips and voltage interruptions . 54
14.12.9 Radiated disturbance (emission) measurement test . 54
14.12.10 Conducted disturbance (emission) measurement test . 54
14.12.11 Power line harmonics emission measurement test . 54
14.13 Estimation of electric and heat recovery efficiency up to ten years of
operation . 54
14.13.1 General . 54
14.13.2 Test method . 55
14.13.3 Calculation of estimated electric efficiency . 56
14.13.4 Calculation of estimated heat recovery efficiency . 58
14.14 Electric demand-following test . 58

CDV IEC 62282-3-201 © IEC 2023 – 4 –
14.14.1 General . 58
14.14.2 Electric demand profile . 58
14.14.3 Test method . 59
14.14.4 Calculation of results .
...