EN 62496-2-1:2011
(Main)Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
IEC 62496-2-1:2011 describes the various methods to measure the optical attenuation and isolation of optical circuit boards (OCBs).
Optische Leiterplatten - Teil 2-1: Messungen - Optische Dämpfung und Isolation
Cartes à circuits optiques - Partie 2-1: Mesures - Affaiblissement et isolation optiques
la CEI 62496-2-1:2011 décrit les différentes méthodes utilisées pour mesurer l'affaiblissement et l'isolation optiques des cartes à circuits optiques (OCB, Optical Circuit Boards).
Plošče z optičnimi vezji - 2-1. del: Meritve - Optično slabljenje in izolacija (IEC 62496-2-1:2011)
IEC 62496-2-1 opisuje različne metode za merjenje optičnega slabljenja in izolacije plošč z optičnimi vezji (OCB).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62496-2-1:2011
01-november-2011
3ORãþH]RSWLþQLPLYH]MLGHO 0HULWYH2SWLþQRVODEOMHQMHLQL]RODFLMD ,(&
Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation (IEC
62496-2-1:2011)
Optische Leiterplatten - Teil 2-1: Messungen - Optische Dämpfung und Isolation (IEC
62496-2-1:2011)
Cartes à circuits optiques - Partie 2-1: Mesures - Affaiblissement et isolation optiques
(CEI 62496-2-1:2011)
Ta slovenski standard je istoveten z: EN 62496-2-1:2011
ICS:
31.180 7LVNDQDYH]MD 7,9 LQWLVNDQH Printed circuits and boards
SORãþH
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN 62496-2-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62496-2-1:2011
---------------------- Page: 2 ----------------------
SIST EN 62496-2-1:2011
EUROPEAN STANDARD
EN 62496-2-1
NORME EUROPÉENNE
September 2011
EUROPÄISCHE NORM
ICS 33.180.01
English version
Optical circuit boards -
Part 2-1: Measurements -
Optical attenuation and isolation
(IEC 62496-2-1:2011)
Cartes à circuits optiques - Optische Leiterplatten -
Partie 2-1: Mesures - Teil 2-1: Messungen -
Affaiblissement et isolation optiques Optische Dämpfung und Isolation
(CEI 62496-2-1:2011) (IEC 62496-2-1:2011)
This European Standard was approved by CENELEC on 2011-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62496-2-1:2011 E
---------------------- Page: 3 ----------------------
SIST EN 62496-2-1:2011
EN 62496-2-1:2011 - 2 -
Foreword
The text of document (86/396/FDIS), future edition 1 of IEC 62496-2-1, prepared by IEC TC 86, "Fibre
optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 62496-2-1:2011.
The following dates are fixed:
(dop) 2012-06-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-09-01
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62496-2-1:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-1-1 NOTE Harmonized as EN 60793-1-1.
IEC 60794-1-1 NOTE Harmonized as EN 60794-1-1.
IEC 61280-4-1 NOTE Harmonized as EN 61280-4-1.
IEC 61300-3-35 NOTE Harmonized as EN 61300-3-35.
---------------------- Page: 4 ----------------------
SIST EN 62496-2-1:2011
- 3 - EN 62496-2-1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60793-2-10 - Optical fibres - EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.