EN IEC 62496-4-214:2020
(Main)Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
IEC 62496-4-214: 2020 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as "assembly") using single-row thirty-two-channel connectors for polymer waveguides connected with a symmetric PMT connector.
Optische Leiterplatten - Teil 4-214: Schnittstellen Standard - Konfektionierter OCB-Wellenleiter mit einreihigem symmetrischen 32-Kanal-PMT-Steckverbinder
Cartes à circuits optiques - Partie 4-214 : Normes d’interface - Terminaison d’un ensemble de cartes à circuits optiques à guide d’onde utilisant un connecteur PMT symétrique de trente-deux canaux sur une seule rangée
IEC 62496-2-214:2020 définit les dimensions d’interface normalisées pour la terminaison d'un ensemble de cartes à circuits optiques (OCB: optical circuit board) à guides d'ondes (désigné plus simplement sous le terme "ensemble") qui utilise des connecteurs de trente-deux canaux sur une seule rangée pour des guides d’ondes en polymère connectés par un connecteur PMT symétrique.
Plošče z optičnimi vezji - 4-214. del: Standardi za vmesnike - Sestav OCB z valovodom, zaključenim z enovrstičnimi dvaintridesetimi simetričnimi PMT-konektorji (IEC 62496-4-214:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2020
Plošče z optičnimi vezji - 4-214. del: Standardi za vmesnike - Sestav OCB z
valovodom, zaključenim z enovrstičnimi dvaintridesetimi simetričnimi PMT-
konektorji (IEC 62496-4-214:2020)
Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB
assembly using a single-row thirty-two-channel symmetric PMT connector (IEC 62496-4-
214:2020)
Optische Leiterplatten - Teil 4-214: Schnittstellen Standard - Konfektionierter OCB
Wellenleiter mit einreihigem symmetrischen 32-Kanal PMT Steckverbinder (IEC 62496-4
-214:2020)
Cartes à circuits optiques - Partie 4-214 : Normes d’interface - Terminaison d’un
ensemble de cartes à circuits optiques à guide d’onde utilisant un connecteur PMT
symétrique de trente-deux canaux sur une seule rangée (IEC 62496-4-214:2020)
Ta slovenski standard je istoveten z: EN IEC 62496-4-214:2020
ICS:
31.180 Tiskana vezja (TIV) in tiskane Printed circuits and boards
plošče
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62496-4-214
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 33.180.01
English Version
Optical circuit boards - Part 4-214: Interface standards -
Terminated waveguide OCB assembly using a single-row thirty-
two-channel symmetric PMT connector
(IEC 62496-4-214:2020)
Cartes à circuits optiques - Partie 4-214 : Normes Optische Leiterplatten - Teil 4-214: Schnittstellen Standard -
d’interface - Terminaison d’un ensemble de cartes à circuits Konfektionierter OCB Wellenleiter mit einreihigem
optiques à guide d’onde utilisant un connecteur PMT symmetrischen 32-Kanal PMT Steckverbinder
symétrique de trente-deux canaux sur une seule rangée (IEC 62496-4-214:2020)
(IEC 62496-4-214:2020)
This European Standard was approved by CENELEC on 2020-06-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62496-4-214:2020 E
European foreword
The text of document 86/563/CDV, future edition 1 of IEC 62496-4-214, prepared by IEC/TC 86 "Fibre
optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-03-17
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-06-17
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62496-4-214:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61754-5 NOTE Harmonized as EN 61754-5
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62496-1 - Optical circuit boards - Part 1: General EN 62496-1 -
IEC 62496-4 - Optical circuit boards - Part 4: Interface EN 62496-4 -
standards - General and guidance
IEC 62496-4-214 ®
Edition 1.0 2020-05
INTERNATIONAL
STANDARD
Optical circuit boards –
Part 4-214: Interface standards – Terminated waveguide OCB assembly using
a single-row thirty-two-channel symmetric PMT connector
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.01 ISBN 978-2-8322-8307-3
– 2 – IEC 62496-4-214:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 5
5 Interface dimensions of thirty-two-channel for the assembly, guide pins and clamp
spring . 6
(informative) Dimensions of an example of components for the assembly . 10
A.1 Symmetric PMT connector . 10
A.2 Waveguide OCB . 11
(informative) Dimensions of an example of a single-row thirty-two-channel
MT ferrule . 13
Bibliography . 16
Figure 1 – Interconnection between the assembly and the MT connector . 6
Figure 2 – Interface dimensions of thirty-two-channel for the assembly . 6
Figure 3 – Interface views of thirty-two-channel for the assembly . 7
Figure 4 – Interface views of the guide pin . 8
Figure 5 – Interface views of the clamp spring . 8
Figure A.1 – An example of components of the symmetric PMT connector . 10
Figure A.2 – Expanded view of end-face for an example of the single-row thirty-two-
channel PMT body . 11
Figure A.3 – Positions of the example of thirty-two channel ports of OCB . 12
Figure B.1 – Interface dimensions of an example of single‑row thirty‑two‑channel
MT ferrule . 13
Figure B.2 – Interface views of an example of single-row thirty-two-channel MT ferrule . 14
Table 1 – Interface dimensions of thirty-two-channel for the assembly . 7
Table 2 – Positions of cores of thirty-two-channel for the assembly. 7
Table 3 – Interface dimensions of the guide pin . 8
Table 4 – Interface dimensions of the clamp spring . 9
Table A.1 – Interface dimensions of an example of the single-row thirty-two-channel for
PMT body . 11
Table A.2 – Positions of cores for an example of the thirty-two-channel ports of OCB . 12
Table B.1 – Interface dimensions of an example of single‑row thirty‑two‑channel
MT ferrule . 14
Table B.2 – Fibre hole positions of an example of single‑row thirty‑two‑channel
MT ferrule . 15
IEC 62496-4-214:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL CIRCUIT BOARDS –
Part 4-214: Interface standards – Terminated waveguide OCB assembly
using a single-row thirty-two-channel symmetric PMT connector
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62496-4-214 has been prepared by IEC technical committee 86:
Fibre optics.
The text of this International Standard is based on the following documents:
CDV Report on voting
86/563/CDV 86/564/RVC
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.