prEN IEC 60730-2-24:2025

Automatic electrical controls - Part 2-24: Particular requirements for displacement electrical controls

Dispositifs de commande électrique automatiques - Partie 2-24: Exigences particulières pour les dispositifs de commande électriques de déplacement

Avtomatske električne krmilne naprave - 2-24. del: Posebne zahteve za premične električne krmilne naprave

General Information

• Status: Not Published
• Publication Date: 04-Apr-2027
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: CLC/TC 72 - Automatic controls for household use
• Drafting Committee: IEC/TC 72 - IEC_TC_72
• Current Stage: 4020 - Enquiry circulated - Enquiry
• Start Date: 05-Sep-2025
• Due Date: 29-Jan-2021
• Completion Date: 05-Sep-2025
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Mandate: M/536 - [C(2015)536] Standardisation request as regards radio equipment in support of Directive 2014/53/EU
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: oSIST prEN IEC 60730-2-24:2025 - Automatic electrical controls - Part 2-24: Particular requirements for displacement electrical controls

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2025
Avtomatske električne krmilne naprave - 2-24. del: Posebne zahteve za premične
električne krmilne naprave
Automatic electrical controls - Part 2-24: Particular requirements for displacement
electrical controls
Dispositifs de commande électrique automatiques - Partie 2-24: Exigences particulières
pour les dispositifs de commande électriques de déplacement
Ta slovenski standard je istoveten z: prEN IEC 60730-2-24:2025
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

72/1506/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 60730-2-24 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:

2025-09-05 2025-11-28
SUPERSEDES DOCUMENTS:
72/1458/CD, 72/1489/CC
IEC TC 72 : AUTOMATIC ELECTRICAL CONTROLS
SECRETARIAT: SECRETARY:
United States of America Ms Grace Roh
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee
Draft for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Automatic electrical controls –Part 2-24: Particular requirements for displacement electrical controls

PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose
without permission in writing from IEC.

IEC CDV 60730-2-24 © IEC 2025
1 CONTENTS
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 3.2 Definitions of types of control according to purpose . 6
8 3.2.101 6
9 3.2.102 6
10 3.4 Definitions relating to disconnection and interruption . 6
11 3.8 Definitions relating to component parts of controls . 7
12 3.8.3 7
13 4 General . 7
14 4.3.4.5 According to purpose . 7
15 5 Required technical information . 7
16 6 Protection against electric shock . 9
17 7 Provision for protective earthing . 9
18 8 Terminals and terminations . 10
19 9 Constructional requirements . 10
20 9.3.4 Setting by the manufacturer . 10
21 9.3.101 displacement electrical controls with integrated protective function . 10
22 9.4.3 Type 2 action . 10
23 10 Threaded parts and connections . 10
24 11 Creepage distances, clearances and distances through solid insulation . 10
25 12 Components . 10
26 13 Fault assessment on electronic circuits. 10
27 14 Moisture and dust resistance . 10
28 15 Electric strength and insulation resistance . 11
29 16 Heating . 11
30 17 Manufacturing deviation and drift . 11
31 18 Environmental stress . 11
32 19 Endurance . 11
33 19.15 Test for particular purpose controls . 12
34 20 Mechanical strength . 13
35 20.2 Impact resistance . 13
36 20.8 Flexing – test . 13
37 21 Resistance to heat, fire and tracking . 13
38 22 Resistance to corrosion . 13
39 23 Electromagnetic compatibility (EMC) requirements – Emission . 13
40 24 Normal operation . 13
41 25 Electromagnetic compatibility (EMC) requirements – Immunity . 13
42 26 Abnormal operation tests . 13
43 Annex H (normative) Requirements related to functional safety . 17
44 H.17 Manufacturing deviation and drift . 17
IEC CDV 60730-2-24 © IEC 2025
45 H.25 Electromagnetic compatibility (EMC) requirements – Immunity . 18
46 Annex AA (informative) Guide to the application of displacement electrical controls
47 within the scope of this standard . 19
48 AA.1 General . 19
49 AA.2 Operational features . 19
50 AA.3 Installation specification . 19
51 AA.4 Guidance to choose a proper displacement electrical control for a specific
52 application . 21
53 Bibliography . 22
55 Figure 101 – Positions and travel distance of displacement electrical control(s) . 14
56 Figure 102 – Drawing for measuring the disconnection travel distance . 15
57 Figure 103 – An example of test fixture . 16
58 Figure AA.1 – Diagram of Example 1 . 20
59 Figure AA.2 – Diagram of Example 2 . 21
61 Table 1– Required technical information and methods of providing these information . 6
IEC CDV 60730-2-24 © IEC 2025
63 INTERNATIONAL ELECTROTECHNICAL COMMISSION
64 ____________
66 AUTOMATIC ELECTRICAL CONTROLS –
68 Part 2-24: Particular requirements for displacement electrical controls
70 FOREWORD
71 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
72 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
73 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
74 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
75 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
76 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
77 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
78 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
79 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
80 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
81 consensus of opinion on the relevant subjects since each technical committee has representation from all
82 interested IEC National Committees.
83 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
84 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
85 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
86 misinterpretation by any end user.
87 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
88 transparently to the maximum extent possible in their national and regional publications. Any divergence between
89 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
90 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
91 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
92 services carried out by independent certification bodies.
93 6) All users should ensure that they have the latest edition of this publication.
94 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
95 members of its technical committees and IEC National Committees for any personal injury, property damage or
96 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
97 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
98 Publications.
99 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
100 indispensable for the correct application of this publication.
101 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
102 rights. IEC shall not be held responsible for identifying any or all such patent rights.
103 IEC 60730-2-24 has been prepared by IEC technical committee 72: AUTOMATIC ELECTRICAL
104 CONTROLS. It is an International Standard.
105 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
107 Full information on the voting for its approval can be found in the report on voting indicated in
108 the above table.
109 The language used for the development of this International Standard is English [change
110 language if necessary].
111 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
112 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
113 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
114 described in greater detail at www.iec.ch/publications.
IEC CDV 60730-2-24 © IEC 2025
115 A list of all parts of the IEC 60730 series, under the general title: AUTOMATIC ELECTRICAL
116 CONTROL, can be found on the IEC website.
117 This part 2-24is intended to be used in conjunction with IEC 60730-1. It was established on the basis
118 of the sixth edition of that standard (2022. Consideration may be given to future editions of, or
119 amendments to, IEC 60730-1.
120 This part 2-24supplements or modifies the corresponding clauses in IEC 60730-1, so as to convert
121 that publication into the IEC standard: Pa
...