EN 61300-3-25:2013

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed

IEC 61300-3-25:2013 describes the procedure to determine the concentricity of the axis of the bore in a non-angled ferrule with the axis of the ferrule, or in the case of non-angled ferrules with fibre installed, to determine the concentricity of the axis of the fibre core with the axis of the ferrule. This second edition cancels and replaces the first edition published in 1997 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - reconsideration of method A with the idea of applying a signal processor; - introduction of two new annexes (A and B). Keywords: concentricity of the axis of the bore, non-angled ferrule

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-25: Untersuchungen und Messungen - Konzentrizität der nicht schräggeschliffenen Ferrulen und der nicht schräggeschliffenen Ferrulen mit eingebauter Faser

Dispositifs d’interconnexion et composants passifs à fibres optiques - Procédures fondamentales d’essais et de mesures - Partie 3-25: Examens et mesures - Concentricité des férules sans angle et des férules sans angle avec fibre montée

La CEI 61300-3-25:2013 décrit une procédure en vue de déterminer la concentricité de l'axe de l'alésage d'une férule sans angle avec l'axe de la férule, ou dans le cas de férules sans angle avec fibre montée, de déterminer la concentricité de l'axe du coeur de la fibre avec l'axe de férule. Cette deuxième édition annule et remplace la première édition parue en 1997; elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - révision de la méthode A en vue d'utiliser un processeur de signaux; - introduction de deux nouvelles annexes (A et B). Mots clés: concentricité de l'axe de l'alésage, férule sans angle

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-25. del: Preiskave in meritve - Koncentričnost nekotnih tulk in nekotnih tulk z vstavljenim optičnim vlaknom (IEC 61300-3-25:2013)

General Information

• Status: Withdrawn
• Publication Date: 19-Dec-2013
• Withdrawal Date: 17-Oct-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Oct-2017
• Completion Date: 04-Oct-2017
• Ref Project: SIST EN 61300-3-25:2014 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed

Relations

• Replaces: EN 61300-3-25:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed
• Effective Date: 29-Jan-2023
• Replaced By: EN 61300-3-25:2016 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed
• Effective Date: 27-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-3-25:2014
01-marec-2014
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO3UHLVNDYHLQPHULWYH.RQFHQWULþQRVWQHNRWQLKWXONLQ
QHNRWQLKWXON]YVWDYOMHQLPRSWLþQLPYODNQRP,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-25: Examinations and measurements - Concentricity
of the non-angled ferrules and non-angled ferrules with fibre installed
/
Dispositifs d’interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d’essais et de mesures -- Partie 3-25: Examens et mesures -
Concentricité des férules sans angle et des férules sans angle avec fibre montée
Ta slovenski standard je istoveten z: EN 61300-3-25:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-3-25:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-3-25:2014

---------------------- Page: 2 ----------------------

SIST EN 61300-3-25:2014

EUROPEAN STANDARD
EN 61300-3-25

NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-3-25:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 3-25: Examinations and measurements -
Concentricity of the non-angled ferrules and non-angled ferrules with fibre
installed
(IEC 61300-3-25:2013)


Dispositifs d’interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive Bauteile -
Procédures fondamentales d’essais et de Grundlegende Prüf- und Messverfahren --Teil
mesures - 3-25: Untersuchungen und Messungen -
Partie 3-25: Examens et mesures - Konzentrizität der nicht abgewinkelten
Concentricité des férules sans angle et des Ferrulen und der nicht abgewinkelten Ferrulen
férules sans angle avec fibre montée mit eingebauter Faser
(CEI 61300-3-25:2013) (IEC 61300-3-25:2013)




This European Standard was approved by CENELEC on 2013-10-18. CENELEC members are bound to comply with
the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to
the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-
CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-25:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61300-3-25:2014
EN 61300-3-25:2013 - 2 -
Foreword
The text of document 86B/3548/CDV, future edition 2 of IEC 61300-3-25, prepared by subcommittee
86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-3-25:2013.
The following dates are fixed:
(dop) 2014-07-18
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-10-18
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61300-3-25:1997.
EN 61300-3-25:2013 includes the following significant technical changes with respect to EN 61300-3-
25:1997:
a) reconsideration of method A with the idea of applying a signal processor;
b) introduction of two new annexes (A and B).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.


Endorsement noti
...