iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

prEN IEC 62496-4-3:2024

(Main)

Optical circuit boards - Part 4-3: Interface standards - Terminated waveguide OCB assembly using a single-row 32-channel PMT connector intermateable with a 250-μm pitch MPO 16

Optical circuit boards - Part 4-3: Interface standards - Terminated waveguide OCB assembly using a single-row 32-channel PMT connector intermateable with a 250-μm pitch MPO 16

This part of IEC 62496 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as assembly) using single-row thirty-two-channel connectors for polymer waveguides connected with a PMT connector, and the PMT connector is intermateable with MPO 16 specified in IEC 61754-7-4.

Optische Leiterplatten - Teil 4-3: Schnittstellennormen - Konfektionierter OCB Wellenleiter mit 250 μm Raster MPO 16 Steckverbinder steckbaren einreihigem 32-Kanal PMT Steckverbinder

Cartes à circuits optiques - Partie 4-3: Normes d'interface - Terminaison d'un ensemble de cartes à circuits optiques à guide d'ondes qui utilise un connecteur PMT de 32 canaux sur une seule rangée accouplable avec un MPO 16 à pas de 250 μm

Plošče z optičnimi vezji - 4-3. del: Standardi za vmesnike - Sestav zaključenega valovoda OCB, ki uporablja enoredni 32-kanalski konektor PMT, ki se ujema s konektorjem MPO 16 z medkontaktnim razmikom 250 µm

General Information

Status
Not Published
Publication Date
11-Jun-2023
ICS
33.180.01 - Fibre optic systems in general
Technical Committee
CLC/SR 86 - Fibre optics
Drafting Committee
IEC/TC 86 - IEC_TC_86
Current Stage
4020 - Enquiry circulated - Enquiry
Start Date
10-May-2024
Completion Date
10-May-2024
Ref Project
oSIST prEN IEC 62496-4-3:2024 - Optical circuit boards - Part 4-3: Interface standards - Terminated waveguide OCB assembly using a single-row 32-channel PMT connector intermateable with a 250-μm pitch MPO 16

Buy Standard

prEN IEC 62496-4-3:2024prEN IEC 62496-4-3:2024
PreviousNext
Draft
prEN IEC 62496-4-3:2024
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62496-4-3:2024
01-julij-2024
Plošče z optičnimi vezji - 4-3. del: Standardi za vmesnike - Sestav zaključenega
valovoda OCB, ki uporablja enoredni 32-kanalski konektor PMT, ki se ujema s
konektorjem MPO 16 z medkontaktnim razmikom 250 µm
Optical circuit boards - Part 4-3: Interface standards - Terminated waveguide OCB
assembly using a single-row 32-channel PMT connector intermateable with a 250-μm
pitch MPO 16
Optische Leiterplatten - Teil 4-3: Schnittstellennormen - Konfektionierter OCB
Wellenleiter mit 250 μm Raster MPO 16 Steckverbinder steckbaren einreihigem 32-
Kanal PMT Steckverbinder
Cartes à circuits optiques - Partie 4-3: Normes d'interface - Terminaison d'un ensemble
de cartes à circuits optiques à guide d'ondes qui utilise un connecteur PMT de 32
canaux sur une seule rangée accouplable avec un MPO 16 à pas de 250 μm
Ta slovenski standard je istoveten z: prEN IEC 62496-4-3:2024
ICS:
31.180 Tiskana vezja (TIV) in tiskane Printed circuits and boards
plošče
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
oSIST prEN IEC 62496-4-3:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62496-4-3:2024

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62496-4-3:2024

86/641/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62496-4-3 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-05-10 2024-07-05
SUPERSEDES DOCUMENTS:
86/627/CD, 86/640/CC

IEC TC 86 : FIBRE OPTICS
SECRETARIAT: SECRETARY:
United States of America Mr Peter Pondillo
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

SC 86B,TC 91
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Optical circuit boards – Part 4-3: Interface standards – Terminated waveguide OCB assembly using a single-
row 32-channel PMT connector intermateable with a 250-μm pitch MPO 16

PROPOSED STABILITY DATE: 2029

NOTE FROM TC/SC OFFICERS:


Copyright © 2024 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this electronic
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writi ng from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62496-4-3:2024
86/641/CDV – 2 – IEC CDV 62496-4-3 © IEC 2024

CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Description . 6
5 Interface dimensions of 32-channel for the assembly, guide pins and clamp spring . 7
Annex A (informative) Dimensions of an example of components for the assembly . 12
A.1 PMT connector . 12
A.2 Waveguide OCB . 13
Annex B (informative
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61744:2023(Main)
Calibration of fibre optic chromatic dispersion test sets
SIST EN IEC 61744:2023

IEC 61744:2023 provides standard procedures for the calibration of optical fibre chromatic dispersion (CD) test sets. This document is applicable to all types of CD test sets, with the exception that measurements on multimode optical fibres are excluded. The purpose of this document is to define a standard procedure for calibrating optical fibre chromatic dispersion (CD) test sets. The detailed calibration steps used vary according to the measurement technique used in the CD test set. Whilst it is acknowledged that chromatic dispersion also occurs in multimode fibre and this fibre can be measured on many CD test sets, this document will restrict discussion to single mode fibre measurements applications only. The purpose of the procedures outlined in this document is to focus manufacturers and users of CD test sets toward the reduction of measurement uncertainty in chromatic dispersion determination in optical fibres under all applicable conditions. The procedures apply to calibration laboratories and to the manufacturers or users of CD test sets for the purpose of a) calibrating CD test sets, and b) evaluating the level of performance of the instrument. Use of the procedures also allows correct evaluation of CD test set uncertainty, relative and traceable to appropriate (for example, national) standards. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) updated terms and definitions; b) the use of a reference fibre standard for calibration is now allowed and at the same level as the other calibration method; c) Annex B was split into a new Annex B (on calibration uncertainty, still normative) and a new Annex C (on uncertainty at operating conditions, informative); d) removed former C.3.4 on interferometric method since this method is no longer supported in IEC 60793-1-42; e) removed Annex D and other references in text to calibration compensation to align with other calibration documents; f) removed Annex E and other references in text to use of air wavelength since it is not used in the fibre domain.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62496-2-5:2023(Main)
Optical circuit boards - Basic test and measurement procedures - Part 2-5: Flexibility test for flexible opto-electric circuits
SIST EN IEC 62496-2-5:2023

This part of IEC 62496-2 defines a test method for folding flexibility inspection of flexible opto-electric circuits with a MIT folding endurance tester and presents a guideline for a step stress test method for finding the predetermined minimum mechanical folding radii below which the flexible opto-electric circuits can be damaged by intended folding distortion. Here, test samples are used instead of products for the flexibility test of their flexible opto-electric circuits, and the test samples have the same layer structure as the products.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62496-4-214:2020(Main)
Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
SIST EN IEC 62496-4-214:2020

IEC 62496-4-214: 2020 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as "assembly") using single-row thirty-two-channel connectors for polymer waveguides connected with a symmetric PMT connector.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62129-3:2019(Main)
Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb
SIST EN IEC 62129-3:2019

IEC 62129-3:2019 describes the calibration of optical frequency meters using an optical frequency comb as an internal reference. It is applicable to instruments measuring the optical frequency emitted from sources that are typical for the fibre-optic communications industry. It is assumed that the optical radiation will be coupled to the optical frequency meter by a single-mode optical fibre. This document is part of the IEC 62129 series on the calibration of wavelength/optical frequency measurement instruments. Refer to IEC 62129­1 [3] for the calibration of optical spectrum analyzers, and refer to IEC 62129-2 [4] for calibration of Michelson interferometer single wavelength meters. This first edition cancels and replaces IEC TS 62129-3, published in 2014. This edition includes the following significant technical changes with respect to the previous edition: a) text has been added to 5.2.3 about calibration at a second optical frequency; b) Annex D is now normative; c) Subclause 4.2 has been improved; d) measurement method of frequency has been moved to Annex B; e) example of optical frequency comb has been moved to Annex C; f) frequency-dependence uncertainty has been moved to Annex D. Keywords: calibration of optical frequency meters

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62496-4-1:2019(Main)
Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
SIST EN IEC 62496-4-1:2019

This part of IEC 62496-4 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as assembly) using single-row twelvechannel polymer waveguides for a PMT connector and a waveguide OCB that can be interconnected with a terminated MT ferrule.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61745:2017(Main)
End-face image analysis procedure for the calibration of optical fibre geometry test sets
SIST EN 61745:2018

IEC 61745:2017 describes the calibration of test sets that perform end-face image analysis, also known as "near-field" or "grey-scale" analysis. The principles, however, can be applied to test sets of a different type. The procedures outlined are performed by calibration laboratories and by the manufacturers or users of geometry test sets, for the purpose of calibrating geometry test sets and for evaluating the uncertainties in measurements made on calibrated test sets. The calibration of fibre coating or cable measurement test sets is not covered by this document. This second edition cancels and replaces the first edition, published in 1998, and constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) removal of the limitation of single mode optical fibre geometry test sets to include multimode; b) addition of a new annex as mathematical basis. Keywords: end-face image analysis, optical fibre geometry test sets

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62496-2:2017(Main)
Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
SIST EN 62496-2:2017

IEC 62496-2:2017(E) specifies a method of defining the conditions for measurements of optical characteristics of optical circuit boards. The method comprises the use of code reference look-up tables to identify different critical aspects of the measurement environment. The values extracted from the tables are used to construct a measurement identification code, which, in itself, captures sufficient information about the measurement conditions, so as to ensure consistency of independently measured results within an acceptable margin. Recommended measurement conditions are specified to minimise further variation in independently measured results. Keywords: bandwidth density, optical characteristics of optical circuit boards

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62129-1:2016(Main)
Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
SIST EN 62129-1:2017

IEC 62129-1:2016 specifies procedures for calibrating an optical spectrum analyzer that is developed for use in fibre-optic communications and designed to measure the power distribution of an optical spectrum. It does not apply to an optical wavelength meter that measures only centre wavelengths, a Fabry-Perot interferometer or a monochromator that has no display unit. This first edition of IEC 62129-1 cancels and replaces the first edition of IEC 62129, published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update of term and definitions; - update of calibration conditions; - calculation change of uncertainties related to wavelength temperature dependence, power linearity, power level temperature dependence; - move of Annex E to the bibliography. Keywords: calibrating an optical spectrum analyser

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61746-2:2011/AC:2014(Corrigendum)
Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
SIST EN 61746-2:2011/AC:2014

This part of IEC 61746 provides procedures for calibrating multimode optical time domain reflectometers (OTDR). It covers OTDR measurement errors and uncertainties. The test of the laser(s) source modal condition is included as an optional measurement. This standard does not cover correction of the OTDR response.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61746-1:2011/AC:2014(Corrigendum)
Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres
SIST EN 61746-1:2011/AC:2014

This part of IEC 61746 provides procedures for calibrating single-mode optical time domain reflectometers (OTDR). It only covers OTDR measurement errors and uncertainties. This standard does not cover correction of the OTDR response.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day