iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

FprEN IEC 61978-1:2024

(Main)

Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification

Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification

IEC 61978-1:2024 is available as IEC 61978-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61978-1:2024 applies to fibre optic passive chromatic dispersion compensators, all exhibiting the following features: - they are optically passive; - they have an optical input and an optical output for transmitting optical power; - the ports are optical fibres or optical fibre connectors; - they are wavelength sensitive; - they can be polarization sensitive. This document establishes uniform requirements for the passive chromatic dispersion compensator. This fourth edition cancels and replaces the third edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) harmonization of terms and definitions with IEC TS 62627-09; b) change of Clause 4 regarding requirements.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Passive Lichtwellenleiter - Kompensatoren mit chromatischer Dispersion - Teil 1: Fachgrundspezifikation

Dispositifs d'interconnexion et composants passifs fibroniques - Compensateurs de dispersion chromatique passifs fibroniques - Partie 1 : Spécification générique

IEC 61978-1:2024 est disponible sous forme de IEC 61978-1:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61978-1:2024 s’applique aux compensateurs de dispersion chromatique passifs fibroniques qui présentent les caractéristiques suivantes: - ils sont passifs au niveau optique; - ils possèdent une entrée optique et une sortie optique pour la transmission de la puissance optique; - les ports sont des fibres optiques ou des connecteurs optiques; - ils sont sensibles aux longueurs d’onde; - i ls peuvent être sensibles à la polarisation. Le présent document établit des exigences uniformes pour les compensateurs de dispersion chromatique passifs. Cette quatrième édition annule et remplace la troisième édition parue en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) harmonisation des termes et définitions avec l’IEC TS 62627-09; b) modification de l’Article 4 concernant les exigences.

Optični spojni elementi in pasivne komponente - Optični pasivni kompenzatorji barvne razpršenosti - 1. del: Splošna specifikacija

General Information

Status
Not Published
Publication Date
23-May-2024
ICS
33.180.01 - Fibre optic systems in general
Technical Committee
CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
Drafting Committee
IEC/SC 86B - IEC_SC_86B
Current Stage
5060 - Voting results sent to TC, SR - Formal Approval
Start Date
15-Mar-2024
Completion Date
15-Mar-2024
Ref Project
kSIST FprEN IEC 61978-1:2024 - Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification

Relations

Revises
EN 61978-1:2014 - Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
Effective Date
13-Dec-2022

Buy Standard

prEN IEC 61978-1:2023 - BARVEprEN IEC 61978-1:2023 - BARVE
PreviousNext
Draft
prEN IEC 61978-1:2023 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61978-1:2023
01-julij-2023
Optični spojni elementi in pasivne komponente - Optični pasivni kompenzatorji
barvne razpršenosti - 1. del: Splošna specifikacija
Fibre optic interconnecting devices and passive components - Fibre optic passive
chromatic dispersion compensators - Part 1: Generic specification
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Passive Lichtwellenleiter
- Kompensatoren mit chromatischer Dispersion - Teil 1: Fachgrundspezifikation
Dispositifs d'interconnexion et composants passifs à fibres optiques - Compensateurs de
dispersion chromatique passifs à fibres optiques - Partie 1: Spécification générique
Ta slovenski standard je istoveten z: prEN IEC 61978-1:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61978-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61978-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61978-1:2023
86B/4753/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 61978-1 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-05-26 2023-08-18
SUPERSEDES DOCUMENTS:
86B/4698/CD, 86B/4738A/CC

IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic
dispersion compensators - Part 1: Generic specification

PROPOSED STABILITY DATE: 2033

NOTE FROM TC/SC OFFICERS:


Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download
this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other
purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61978-1:2023
IEC CDV 61978-1/Ed4 © IEC 2023 – 2 – 86B/4753/CD
1 CONTENTS
2
3 CONTENTS . 2
4 FOREWORD . 4
5 1. Scope . 6
6 2. Normative references . 6
7 3. Terms and definitions . 7
8 3.1 Component terms . 7
9 3.2 Performance terms . 8
10 4 Requirements . 10
11 4.1 Classification . 10
12 4.1.1 General . 10
13 4.1.2 Technology . 11
14 4.1.3 Wavelength band .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61756-1:2020(Main)
Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance
SIST EN IEC 61756-1:2020

IEC 61756-1:2019 covers general information on fibre management system interfaces. It includes the definitions and rules under which a fibre management system interface is created and it provides also criteria to identify the minimum bending radius for stored fibres. This document allows both single-mode and multimode fibre to be used. Liquid, gas or dust sealing requirements at the cable entry area or cable element ending are not covered in this document. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of figures to show the interface between protective housing and fibre management system; - addition of definitions for protective housing, closure, wall box, street cabinets and optical distribution frame modules; - addition of table with dimensions of fusion splice protectors and mechanical splices; - addition of method to identify the minimum bending radius for stored fibres; - addition of clause for other factors relevant to fibre management systems; - addition of annex A for example of calculating the minimum bending radius of stored fibres in a fibre management system. Keywords: fibre management system interfaces, minimum bending radius for stored fibres

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TR 50682:2018(Main)
Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections
SIST-TP CLC/TR 50682:2018

The purpose of this document is to describe a round robin on return loss of single mode optical fibre connections. This includes the description of the samples, the test procedures and test instrumentation, results and conclusions.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61978-1:2014(Main)
Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
SIST EN 61978-1:2014

IEC 61978-1:2014 applies to fibre optic passive chromatic dispersion compensators, all exhibiting the following features: - they are optically passive; - they have an optical input and an optical output for transmitting optical power; - the ports are optical fibres or optical fibre connectors; - they are wavelength sensitive; - they may be polarization sensitive. This standard establishes uniform requirements for the passive chromatic dispersion compensator. This third edition cancels and replaces the second edition, published in 2009, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - introduction of new terms and definitions; - revision of classifications; - addition of Annex E. Keywords: fibre optic passive chromatic dispersion compensators

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62074-1:2014(Main)
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
SIST EN 62074-1:2014

IEC 62074-1:2014(E) applies to fibre optic wavelength division multiplexing (WDM) devices. These have all of the following general features: - they are passive, in that they contain no optoelectronic or other transducing elements; - however they may use temperature control only to stabilize the device characteristics; - they exclude any optical switching functions; - they have three or more ports for the entry and/or exit of optical power, and share optical power among these ports in a predetermined fashion depending on the wavelength; - the ports are optical fibres, or optical fibre connectors. This standard establishes uniform requirements for the following: optical, mechanical and environmental properties. This second edition cancels and replaces the first edition, published in 2009, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - substantial updating to the definitions; - the addition of informative Annexes C to G, giving examples of technical information concerning WDM devices. Keywords: fibre optic wavelength division multiplexing, WDM, requirements for optical, mechanical and environmental properties

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
prEN IEC 62074-1:2024(Main)
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
oSIST prEN IEC 62074-1:2024

D133/C027: DOW = DOR + 12 months

  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-1:2019/A1:2024(Amendment)
Dynamic modules - Part 1: Performance standards - General conditions
SIST EN IEC 62343-1:2019/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343-2-1:2019/A1:2024(Amendment)
Dynamic modules - Part 2-1: Reliability qualification - Test template
SIST EN IEC 62343-2-1:2020/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61744:2023(Main)
Calibration of fibre optic chromatic dispersion test sets
SIST EN IEC 61744:2023

IEC 61744:2023 provides standard procedures for the calibration of optical fibre chromatic dispersion (CD) test sets. This document is applicable to all types of CD test sets, with the exception that measurements on multimode optical fibres are excluded. The purpose of this document is to define a standard procedure for calibrating optical fibre chromatic dispersion (CD) test sets. The detailed calibration steps used vary according to the measurement technique used in the CD test set. Whilst it is acknowledged that chromatic dispersion also occurs in multimode fibre and this fibre can be measured on many CD test sets, this document will restrict discussion to single mode fibre measurements applications only. The purpose of the procedures outlined in this document is to focus manufacturers and users of CD test sets toward the reduction of measurement uncertainty in chromatic dispersion determination in optical fibres under all applicable conditions. The procedures apply to calibration laboratories and to the manufacturers or users of CD test sets for the purpose of a) calibrating CD test sets, and b) evaluating the level of performance of the instrument. Use of the procedures also allows correct evaluation of CD test set uncertainty, relative and traceable to appropriate (for example, national) standards. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) updated terms and definitions; b) the use of a reference fibre standard for calibration is now allowed and at the same level as the other calibration method; c) Annex B was split into a new Annex B (on calibration uncertainty, still normative) and a new Annex C (on uncertainty at operating conditions, informative); d) removed former C.3.4 on interferometric method since this method is no longer supported in IEC 60793-1-42; e) removed Annex D and other references in text to calibration compensation to align with other calibration documents; f) removed Annex E and other references in text to use of air wavelength since it is not used in the fibre domain.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61280-1-4:2023(Main)
Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
SIST EN IEC 61280-1-4:2023

IEC 61280-1-4:2023 is available as IEC 61280-1-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61280-1-4:2023 establishes the characterization process of the encircled flux measurement method of light sources intended to be used with multimode fibre. This document sets forth a procedure for the collection of two-dimensional fibre optic nearfield greyscale data and subsequent reduction to one-dimensional data expressed as a set of three sampled parametric functions of radius from the fibre’s optical centre. Estimation of the fibre core diameter is not an objective of this document. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - improvement of calibration procedure and calibration traceability; - improvement of fibre shaker description and requirements; - addition of pulsed light sources; - removal of a poorly traceable calibration process using a micro positioner.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62343:2023(Main)
Dynamic modules - Generic specification
SIST EN IEC 62343:2023

IEC 62343:2023 is available as IEC 62343:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62343:2023 applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343 series, defines terminology, fundamental considerations and basic approaches. The object of this document is to: - establish uniform requirements for operation, reliability and environmental properties of dynamic modules (DMs) to be implemented in the appropriate DM standard, and - provide assistance to the purchaser in the selection of consistently high-quality DM products for their particular applications, as well as in the consultation of the appropriate specific DM standard(s). This document covers performance templates, performance standards, reliability qualification requirements, hardware and software interfaces and related testing methods. Since a dynamic module integrates an optical module/device, printed wiring board, and software/firmware, the standards developed in the series will mimic appropriate existing standards. On the other hand, since "dynamic module" is a relatively new product category, the dynamic module standards series will not be bound by the existing practices where requirements differ.The safety standards as related to dynamic modules are mostly optical power considerations, which is covered by the IEC 60825 series (see Clause 6). This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of terms and definitions for optical multicast switches (3.8); - revision of Clause 4, listing the requirements for standards in the IEC 62343 series; - addition of Clause 6 (Safety requirements).

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day