EN 61850-4:2002
(Main)Communication networks and systems in substations - Part 4: System and project management
Communication networks and systems in substations - Part 4: System and project management
Describes the requirements of the system and project management process and of special supporting tools for engineering and testing.
Kommunikationsnetze und -systeme in Stationen - Teil 4: System- und Projektverwaltung
Réseaux et systèmes de communication dans les postes - Partie 4: Gestion du système et gestion de projet
Décrit les exigences du processus de gestion du système et de gestion de projet ainsi que celles des outils de support spécifiques pour l'étude et les essais.
Communication networks and systems in substations - Part 4: System and project management (IEC 61850-4:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2004
Communication networks and systems in substations - Part 4: System and project
management (IEC 61850-4:2002)
Communication networks and systems in substations -- Part 4: System and project
management
Kommunikationsnetze und -systeme in Stationen -- Teil 4: System- und
Projektverwaltung
Réseaux et systèmes de communication dans les postes -- Partie 4: Gestion du système
et gestion de projet
Ta slovenski standard je istoveten z: EN 61850-4:2002
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61850-4
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2002
ICS 33.200
English version
Communication networks and systems in substations
Part 4: System and project management
(IEC 61850-4:2002)
Réseaux et systèmes de communication Kommunikationsnetze und -systeme
dans les postes in Stationen
Partie 4: Gestion du système Teil 4: System- und Projektverwaltung
et gestion de projet (IEC 61850-4:2002)
(CEI 61850-4:2002)
This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61850-4:2002 E
Foreword
The text of document 57/558/FDIS, future edition 1 of IEC 61850-4, prepared by IEC TC 57, Power
system control and associated communications, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61850-4 on 2002-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-03-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A and B are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61850-4:2002 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61850-4:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60848 1988 Preparation of function charts for control--
systems (Corrigendum 1990)
IEC 61082 Series Preparation of documents used in EN 61082 Series
electrotechnology
IEC 61175 1993 Designations for signals and EN 61175 1993
connections
IEC 61346 Series Industrial systems, installations and EN 61346 Series
equipment and industrial products -
Structuring principles and reference
designations
ISO 9001 1994 Quality systems - Model for quality EN ISO 9001 1994
assurance in design/ development,
production, installation and servicing
NORME CEI
INTERNATIONALE IEC
61850-4
INTERNATIONAL
Première édition
STANDARD
First edition
2002-01
Réseaux et systèmes de communication
dans les postes –
Partie 4:
Gestion du système et gestion de projet
Communication networks and systems
in substations –
Part 4:
System and project management
IEC 2002 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
U
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
61850-4 IEC:2002 – 3 –
CONTENTS
FOREWORD.5
1 Scope and object .9
2 Normative references.9
3 Definitions .11
4 Abbreviations.17
5 Engineering requirements .17
5.1 Introduction .17
5.2 Categories and types of parameters.19
5.3 Engineering tools.25
5.4 Flexibility and expandability .29
5.5 Scalability.31
5.6 Automatic project documentation .33
5.7 Standard documentation .39
5.8 System integrator's support .39
6 System life cycle.39
6.1 Requirements of product versions.39
6.2 Announcement of product discontinuation .43
6.3 Support after discontinuation .43
7 Quality assurance .45
7.1 Division of responsibility .45
7.2 Test equipment.49
7.3 Classification of quality tests.51
Annex A (informative) Announcement of discontinuation (example).57
Annex B (informative) Delivery obligations after discontinuation (example).59
Figure 1 – Structure of the SAS and its environment.17
Figure 2 – Structure of SAS and IED parameters .21
Figure 3 – Engineering tasks and their relationship.25
Figure 4 – Parameterization process .27
Figure 5 – Project related documentation of SAS.33
Figure 6 – Two meanings of the SAS life cycle .41
Figure 7 – Stages of quality assurance – Responsibility of manufacturer
and system integrator.45
Figure 8 – Contents of system test .51
Figure 9 – Contents of type test.53
Figure 10 – Contents of routine test.53
Figure 11 – Testing stages for site acceptance test .55
Figure A.1 – Announcement conditions.57
Figure B.1 – Periods for delivery obligations .59
61850-4 IEC:2002 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COMMUNICATION NETWORKS AND SYSTEMS
IN SUBSTATIONS –
Part 4: System and project management
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61850-4 has been prepared by IEC technical committee 57: Power
system control and associated communications
The text of this standard is based on the following documents:
FDIS Report on voting
57/558/FDIS 57/573/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
Annexes A and B are for information only.
IEC 61850 consists of the following parts, under the general title: Communication networks and
systems in substations:
Part 1: Introduction and overview
___________
Under consideration.
61850-4 IEC:2002 – 7 –
Part 2: Glossary
Part 3: General requirements
Part 4: System and project management
Part 5: Communication requirements for functions and device models
Part 6: Substation automation system configuration description language
Part 7-1: Basic communication structure for substation and feeder equipment – Principles and
models
Part 7-2: Basic communication structure for substation and feeder equipment – Abstract
communication service interface (ACSI)
Part 7-3: Basic communication structure for substation and feeder equipment – Common data
cl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.