EN 61754-7-1:2014

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row

IEC 61754-7-1:2014(E) defines the standard interface dimensions for type MPO family of connectors with one row of fibres. This first edition of IEC 61754-7-1, along with the first edition of IEC 61754-7-2, cancels and replaces the third edition of IEC 61754-7, published in 2008. This first edition of IEC 61754-7-1 includes the one fibre row MPO variants, including the addition of active device receptacles and up-angled plugs. Keywords: interface dimensions for type MPO family of connectors with one row of fibres

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 7-1: Steckverbinderfamilie der Bauart MPO - Eine Faserreihe

Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 7-1: Famille de connecteurs de type MPO - Une rangée de fibres

IEC 61754-7-1:2014 définit les dimensions d’interface normales pour la famille de connecteurs de type MPO à une rangée de fibres. Cette première édition de l’IEC 61754-7-1, conjointement avec la première édition de l’IEC 61754-7-2, annule et remplace la troisième édition de l’IEC 61754-7 parue en 2008. Cette première édition de l’IEC 61754-7-1 traite des variantes MPO à une rangée de fibres, ainsi que des embases de dispositif actif et de fiches angulaires vers le haut. La première édition de l’IEC 61754-7-2 traitera des variantes MPO à deux rangées de fibres et des embases de dispositif actif et de fiches angulaires vers le haut associées. A la suite de la publication de l’IEC 61754-7-1 et de l’IEC 61754-7-2, l’IEC 61754-7 sera supprimée.

Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev - 7-1. del: Družina konektorjev vrste MPO - Vlakna enoredno (IEC 61754-7-1:2014)

Ta del standarda IEC 61754 določa standardne dimenzije vmesnikov za družino konektorjev vrste MPO
z enorednimi vlakni.

General Information

• Status: Published
• Publication Date: 23-Oct-2014
• Withdrawal Date: 07-Oct-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 24-Oct-2014
• Completion Date: 24-Oct-2014
• Ref Project: SIST EN 61754-7-1:2014 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row

Relations

• Replaces: EN 61754-7:2008 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2014
1DGRPHãþD
SIST EN 61754-7:2008
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNLRSWLþQLKNRQHNWRUMHY
GHO'UXåLQDNRQHNWRUMHYYUVWH0329ODNQDHQRUHGQR,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 7-1: Type MPO connector family - One fibre row
Ta slovenski standard je istoveten z: EN 61754-7-1:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61754-7-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 33.180.20 Supersedes EN 61754-7:2008 (partially)
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces - Part 7-1: Type MPO connector
family - One fibre row
(IEC 61754-7-1:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Interfaces de connecteurs pour fibres optiques - Bauteile - Steckgesichter von Lichtwellenleiter-
Partie 7-1: Famille de connecteurs de type MPO - Une Steckverbindern - Teil 7-1: Steckverbinderfamilie der Bauart
rangée de fibres MPO - Eine Faserreihe
(CEI 61754-7-1:2014) (IEC 61754-7-1:2014)
This European Standard was approved by CENELEC on 2014-10-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61754-7-1:2014 E
Foreword
The text of document 86B/3794A/FDIS, future edition 1 of IEC 61754-7-1, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-7-1:2014.

The following dates are fixed:
(dop) 2015-07-08
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-10-08
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61754-7:2008 (Partially).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61754-7-1:2014 was approved by CENELEC as a
European Standard without any modification.

IEC 61754-7-1 ®
Edition 1.0 2014-09
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic

connector interfaces –
Part 7-1: Type MPO connector family – One fibre row

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 33.180.20 ISBN 978-2-8322-1843-3

– 2 – IEC 61754-7-1:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Description . 5
3 Interfaces . 5

Figure 1 – MPO connector configurations . 6
Figure 2 – MPO female plug, down-angled interface . 7
Figure 3 – MPO female plug, up-angled interface . 7
Figure 4 – Optical datum target location diagrams . 9
Figure 5 – Gauge pin . 10
Figure 6 – Gauge for plug . 10
Figure 7 – MPO male plug, down-angled interface . 11
Figure 8 – MPO male plug, up-angled interface . 12
Figure 9 – MPO adaptor interface, opposed keyway configuration . 14
Figure 10 – MPO female plug, flat interface . 16
Figure 11 – MPO male plug, flat interface . 18
Figure 12 – MPO backplane housing interface (1 of 2) . 20
Figure 13 – MPO printed board housing interface (1 of 2) . 23
Figure 14 – MPO adaptor interface, aligned keyway configuration . 26
Figure 15 – MPO active device receptacle, angled interface. 28
Figure 16 – MPO active device receptacle, flat interface . 30

Table 1 – Dimensions of the MPO female plug, down- or up-angled interfaces . 8
Table 2 – Dimensions of the gauge pin . 10
Table 3 – Dimensions of the gauge for plug . 11
Table 4 – Dimensions of the MPO male plug, down- or up-angled interfaces . 13
Table 5 – Dimensions of the MPO adaptor interface, opposed keyway configuration . 15
Table 6 – Dimensions of the MPO female plug, flat interface . 17
Table 7 – Dimensions of the MPO male plug, flat interface . 19
Table 8 – Dimensions of the MPO backplane housing . 22
Table 9 – Grade . 23
Table 10 – Dimensions of the MPO printed board housing interface . 25
Table 11 – Dimensions of the MPO adaptor interface, aligned keyway configuration. 27
Table 12 – Dimensions of the MPO active device receptacle, angled interface . 29
Table 13 – Dimensions of the MPO active device receptacle, flat interface . 31

IEC 61754-7-1:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –

Part 7-1: Type MPO connector family –
One fibre row
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61754-7-1 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This first edition of IEC 61754-7-1, along with the first edition of IEC 61754-7-2, cancels and
replaces the third edition of IEC 61754-7, published in 2008.
This first edition of IEC 61754-7-1 includes the one fibre row MPO variants, including the
addition of active device receptacles and up-angled plugs.
The first edition of IEC 61754-7-2 will include the two fibre row MPO variants and related active
device receptacles and up-angled plugs.

– 4 – IEC 61754-7-1:2014 © IEC 2014
Following the publication of both IEC 61754-7-1 and IEC 61754-7-2, IEC 61754-7 will be
withdrawn.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3794A/FDIS 86B/3826/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61754 series, under the general title Fibre optic interconnecting
devices and passive components – fibre optic connector interfaces, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IEC 61754-7-1:2014 © IEC 2014 – 5 –
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –

Part 7-1: Type MPO connector family –
One fibre row
1 Scope
This part of IEC 61754 defines the standard interface dimensions for type MPO family of
connectors with one row of fibres.
2 Description
The parent connector for type MPO connector family is a multiway plug characterized by a
rectangular ferrule normally 6,4 mm
...