EN 62841-2-1:2018/A11:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This standard does not apply to rotary hammers, even if they can be used as a drill. This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication Key words: Drill, Impact Drill, Hand-held tool, Safety

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-1: Besondere Anforderungen für handgeführte Bohrmaschinen und Schlagbohrmaschinen

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-1: Exigences particulières pour les perceuses portatives et les perceuses à percussion

IEC 62841-2-1:2017 s’applique aux perceuses portatives et aux perceuses à percussion y compris les perceuses à diamant. La présente norme s’applique également aux perceuses pouvant être utilisées pour enfoncer des vis lorsque des embouts de visseuse leur sont ajoutés. La tension assignée est inférieure à 3 700 W. Les limites d'application de la présente Norme aux outils fonctionnant sur batterie sont indiquées en K.1 et L.1. La présente Norme traite des dangers présentés par les outils, encourus par tous les individus dans l'utilisation normale et dans l'utilisation impropre raisonnablement prévisible de ces outils. Les outils électroportatifs, qui peuvent être montés sur un support de travail pour être utilisés comme outils installés à poste fixe sans aucune modification de l'outil lui-même, sont compris dans le domaine d'application de la présente Norme et la combinaison d'un outil portatif et d'un support est considérée comme un outil portable, donc couvert par la Partie 3 applicable. La présente norme ne s’applique pas aux marteaux rotatifs, même s’ils peuvent être utilisés comme une perceuse. La présente Partie 2-1 doit être utilisée conjointement avec la première édition de l’IEC 62841-1 (2014). L'attention des Comités Nationaux est attirée sur le fait que les fabricants d'appareils et les organismes d'essai peuvent avoir besoin d'une période transitoire après la publication d'une nouvelle publication IEC, ou d'une publication amendée ou révisée, pour fabriquer des produits conformes aux nouvelles exigences et pour adapter leurs équipements aux nouveaux essais ou aux essais révisés. Le comité recommande que le contenu de cette publication soit entériné au niveau national au plus tôt 36 mois après la date de publication. Mots clés: perceuses, perceuses à percussion, outil portatif, sécurité

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-1. del: Posebne zahteve za ročne vrtalnike in udarne (vibracijske) vrtalnike - Dopolnilo A11

General Information

• Status: Published
• Publication Date: 08-Aug-2019
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 09-Aug-2019
• Due Date: 06-Jul-2020
• Completion Date: 09-Aug-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 62841-2-1:2018/A11:2019 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills

Relations

• Amends: EN 62841-2-1:2018 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
• Effective Date: 19-Sep-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2019
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-
1. del: Posebne zahteve za ročne vrtalnike in udarne (vibracijske) vrtalnike -
Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact
drills
Elektrische Motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 2-1: Besondere Anforderungen für
handgeführte Bohrmaschinen und Schlagbohrmaschinen
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 2-1: Exigences particulières pour les perceuses portatives et les
perceuses à percussion
Ta slovenski standard je istoveten z: EN 62841-2-1:2018/A11:2019
ICS:
25.080.40 Vrtalniki Drilling machines
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62841-2-1:2018/A11

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2019
ICS 25.140.20
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 2-1: Particular
requirements for hand-held drills and impact drills
Outils électroportatifs à moteur, outils portables et machines Elektrische Motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 2-1: Exigences transportable Werkzeuge und Rasen- und
particulières pour les perceuses portatives et les perceuses Gartenmaschinen - Sicherheit - Teil 2-1: Besondere
à percussion Anforderungen für handgeführte Bohrmaschinen und
Schlagbohrmaschinen
This amendment A11 modifies the European Standard EN 62841-2-1:2018; it was approved by CENELEC on 2019-05-13. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62841-2-1:2018/A11:2019 E

European foreword
This document (EN 62841-2-1:2018/A11:2019) has been prepared by CLC/TC 116 “Safety of motor-
operated electric tools”.
The following dates are fixed:
• latest date by which this document has (dop) 2020–05–13
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023–05–13
standards conflicting with this document
have to be withdrawn
This amendment was developed to correct the operating conditions during the noise test for hand-held
diamond core drills, since the noise at no-load does not properly represent the noise emission of
diamond core drills. Moreover, a detailed Annex ZZ has been provided.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
In this European Standard the following print types are used:
— requirements proper: in roman type;
— test specifications: in italic type;
— explanatory matter: in smaller roman type.
1 Modifications to Annex I, “Measurement of noise and vibration emissions”
Replace the existing first three paragraphs of I.2.5 as follows:
“I.2.5 Operating conditions
Addition:
Drills, except diamond core drills, are tested at no-load without any accessory mounted, all speed
setting devices adjusted to the highest value.
NOTE 101 Experimental investigations have shown that the noise emission values of drills, except diamond core
drills, at no-load and under load are very similar. For reasons of simplification, the noise emission is therefore
measured at no-load.
For impact drills, the speed setting shall be that recommended by the manufacturer for an 8 mm bit for
drilling into concrete.
Impact drills are tested under load as shown in Figure I.101 and in accordance with the conditions
shown in Tables I.101 and I.102.
Diamond core drills are tested under load and in accordance with the conditions shown in
Table I.106.”
Replace the title of Table I.106 with t
...