EN 60876-1:2001

Fibre optic spatial switches - Part 1: Generic specification

Applies to fibre optic switches. These have the following features: -they are passive without optoelectronic elements; -they have two or more states in which power may be routed betweenports; -the ports are optical fibres or optical fibre connectors. This standard establishes uniform requirements for their optical, mechanical and environmental properties. It also establishesmeasurement and test procedures for quality assessment.

Räumliche Umschalter für Lichtwellenleiter - Teil 1: Fachgrundspezifikation

Commutateurs spatiaux à fibres optiques - Partie 1: Spécification générique

S'applique aux commutateurs à fibres optiques. Ces commutateurs possèdent les caracteristiques suivantes: - ils sont passifs sans aucun élément optoélectronique; - its ont au moins deux états dans lesquels la puissance optique peut passer entre ces portes; - les portes sont des fibres optiques ou des connecteurs à fibres optiques. La norme établit des exigences pour les commutateurs et les procédures d'assurance de la qualité.

Fibre optic spatial switches - Part 1: Generic specification (IEC 60876-1:2001)

General Information

• Status: Withdrawn
• Publication Date: 23-Oct-2001
• Withdrawal Date: 30-Sep-2004
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Aug-2013
• Completion Date: 17-Aug-2013
• Ref Project: SIST EN 60876-1:2002 - Fibre optic spatial switches -- Part 1: Generic specification

Relations

• Replaced By: EN 60876-1:2012 - Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60876-1:2002
prva izdaja
STANDARD
september 2002
Fibre optic spatial switches - Part 1: Generic specification (IEC 60876-1:2001)
ICS 33.180.20 Referenčna številka
SIST EN 60876-1:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60876-1
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2001
ICS 33.180.20
English version
Fibre optic spatial switches
Part 1: Generic specification
(IEC 60876-1:2001)
Commutateurs spatiaux à fibres optiques Räumliche Umschalter für
Partie 1: Spécification générique Lichtwellenleiter
(CEI 60876-1:2001) Teil 1: Fachgrundspezifikation
(IEC 60876-1:2001)
This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60876-1:2001 E

---------------------- Page: 2 ----------------------

EN 60876-1:2001 - 2 -
Foreword
The text of document 86B/1466/FDIS, future edition 3 of IEC 60876-1, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60876-1 on 2001-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-10-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60876-1:2001 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 NOTE  Harmonized in the series EN 60068 (modified).
IEC 60874 NOTE  Harmonized in the series EN 60874 (modified).
IEC 61753 NOTE  Harmonized in the series EN 61753 (modified).
IEC 61754-2 NOTE  Harmonized as EN 61754-2:1997 (not modified).
IEC 61754-4 NOTE  Harmonized as EN 61754-4:1997 (not modified).
IEC 61754-13 NOTE  Harmonized as EN 61754-13:1999 (not modified).
IEC 62005 NOTE  Harmonized in the series EN 62005 (modified).
_________

---------------------- Page: 3 ----------------------

- 3 - EN 60876-1:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical HD 245 Series
technology
1)
IEC 60050-731 - International Electrotechnical
Vocabulary (IEV)
Chapter 731: Optical fibre
communication
-1)
IEC 60410 Sampling plans and procedures for--
inspection by attributes
IEC 60617 Series Graphical symbols for diagrams EN 60617 Series
-1)
2)
IEC 60695-2-2 Fire hazard testing EN 60695-2-2 1994
Part 2: Test methods -- Section 2:
Needle-flame test
-1) 2)
IEC 60825-
...