iTeh Standards logo
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60034-5:2020/AC:2024-01

(Corrigendum)

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

Drehende elektrische Maschinen - Teil 5: Schutzarten aufgrund der Gesamtkonstruktion von drehenden elektrischen Maschinen (IP-Code) - Einteilung

Machines électriques tournantes - Partie 5: Degrés de protection procurés par la conception intégrale de machines électriques tournantes (code IP) - Classification

Električni rotacijski stroji - 5. del: Stopnja zaščite, ki jo zagotavlja celovita zasnova električnih rotacijskih strojev (koda IP) - Razvrščanje (IEC 60034-5:2020/COR1:2024)

General Information

Status
Published
Publication Date
25-Jan-2024
ICS
29.160.01 - Rotating machinery in general
Technical Committee
CLC/TC 2 - Rotating machinery
Current Stage
6060 - Document made available - Publishing
Start Date
26-Jan-2024
Completion Date
26-Jan-2024
Ref Project
SIST EN IEC 60034-5:2020/AC:2024 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (IEC 60034-5:2020/COR1:2024)

Relations

Corrects
EN IEC 60034-5:2020 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Effective Date
23-Jan-2024
Revised
EN IEC 60034-5:2020/prAA:2025 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Effective Date
14-May-2024
EN IEC 60034-5:2020/AC:2024EN IEC 60034-5:2020/AC:2024
PreviousNext
Corrigendum
EN IEC 60034-5:2020/AC:2024
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Frequently Asked Questions

EN IEC 60034-5:2020/AC:2024-01 is a corrigendum published by CLC. Its full title is "Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification". This standard covers: Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

EN IEC 60034-5:2020/AC:2024-01 is classified under the following ICS (International Classification for Standards) categories: 29.160.01 - Rotating machinery in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN IEC 60034-5:2020/AC:2024-01 has the following relationships with other standards: It is inter standard links to EN IEC 60034-5:2020, EN IEC 60034-5:2020/prAA:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase EN IEC 60034-5:2020/AC:2024-01 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2024
Električni rotacijski stroji - 5. del: Stopnja zaščite, ki jo zagotavlja celovita zasnova
električnih rotacijskih strojev (koda IP) - Razvrščanje (IEC 60034-
5:2020/COR1:2024)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral
design of rotating electrical machines (IP code) - Classification (IEC 60034-
5:2020/COR1:2024)
Drehende elektrische Maschinen - Teil 5: Schutzarten aufgrund der Gesamtkonstruktion
von drehenden elektrischen Maschinen (IP-Code) - Einteilung (IEC 60034-
5:2020/COR1:2024)
Machines électriques tournantes - Partie 5: Degrés de protection procurés par la
conception intégrale de machines électriques tournantes (code IP) - Classification (IEC
60034-5:2020/COR1:2024)
Ta slovenski standard je istoveten z: EN IEC 60034-5:2020/AC:2024-01
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60034-
5:2020/AC:2024-01
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2024
ICS 29.160.01
English Version
Rotating electrical machines - Part 5: Degrees of protection
provided by the integral design of rotating electrical machines (IP
code) - Classification
(IEC 60034-5:2020/COR1:2024)
Machines électriques tournantes - Partie 5: Degrés de Drehende elektrische Maschinen - Teil 5: Schutzarten
protection procurés par la conception intégrale de machines aufgrund der Gesamtkonstruktion von drehenden
électriques tournantes (code IP) - Classification elektrischen Maschinen (IP-Code) - Einteilung
(IEC 60034-5:2020/COR1:2024) (IEC 6003
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

CLC
EN IEC 60072-2:2025(Main)
Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360
SIST EN IEC 60072-2:2026

IEC 60072-2: 2025 covers the majority of rotating electrical machines for industrial purposes within the dimension range and output powers: - Foot-mounted: shaft heights: 355 mm to 1 000 mm. - Flange-mounted: pitch circle diameter of flange: 1 180 mm to 2 360 mm. It gives tables of fixing dimensions, shaft extension dimensions and their tolerances. However, the variety of construction and the wide range of applications for the large machines with shaft heights above 315 mm have led to the establishment of a relatively large number of values for the dimension in order to cover all possible constructions. Owing to this, the present part covers a wider range than IEC 60072-1 within which range values suitable for all designs or for a more detailed standardization can be chosen. NOTE The mounting dimensions given in this document for shaft heights 355 mm and 400 mm have been chosen from values given in IEC 60072-1. This second edition cancels and replaces the first edition published in 1990. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) complete revision on the basis of IEC 60072-1; b) additional tolerances and measurements for shafts and flanges (DIN SPEC 42955).

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-15:2025(Main)
Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
SIST EN IEC 60034-15:2025

IEC 60034-15: 2025 relates to AC machines incorporating form-wound stator coils that are intended to be connected to a standard grid supply. It specifies the test procedures and voltages to be applied to sample coils, as well as routine tests performed on coils mounted in the stator core. The purpose of this document is to show the ability of a stator winding to resist voltage transients originating from the grid the machine is connected to. Annex A gives further information. The stator windings and coils for converter-fed machines are excluded from the scope of this document. This document is not intended for use on complete windings since it is difficult to determine when the turn insulation has failed due to the test. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - harmonize the standard test levels with IEEE Std 522TM [2]; - introduce an enhanced surge impulse voltage withstand level; - introduce the option to test up to the point of electrical breakdown; - improve the evaluation of the recorded impulses in case of oscillations and overshoot; - indicate that converter fed machines are excluded from the scope; - provide guidance on the execution of impulse tests.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-9:2024(Main)
Rotating electrical machines - Part 9: Noise limits
SIST EN IEC 60034-9:2025

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-12:2024(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN IEC 60034-12:2025

IEC 60034-12:2024 is available as IEC 60034-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-11:2024(Main)
Rotating electrical machines - Part 11: Thermal protection
SIST EN IEC 60034-11:2025

IEC 60034-11:2020 is available as IEC 60034-11:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-11:2020 specifies requirements relating to the use of thermal protectors and thermal detectors incorporated into the stator windings or placed in other suitable positions in induction machines in order to protect them against serious damage due to thermal overloads. It applies to single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034-1 and IEC 60034-12 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting. The main changes with respect to the previous edition are: - the additional specification of winding temperature limits for temperature class 200 (N), - the increased limits of maximum winding temperatures for overloads with rapid variation, - the clarification that the motor winding may be permanently damaged after it has been exposed to temperatures - a clarification of the definition of indirect thermal protection, - a clarification on the test methods for larger motors.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-2-2:2024(Main)
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1
SIST EN IEC 60034-2-2:2024

IEC 60034-2-2:2024 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034‑2‑1. These methods apply when full-load testing is not practical and results in a greater uncertainty. The specific methods described are: - Calibrated-machine method. - Retardation method. - Calorimetric method. - Summation of losses for permanent magnet excited synchronous machines. This second edition cancels and replaces the first edition published in 2010. This edition includes the following significant technical changes with respect to the previous edition: - Layout and procedures aligned with IEC 60034-2-1 and IEC 60034-2-3. - Annex A added: an informative procedure for the summation of losses for large permanent-magnet excited synchronous machines.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-2-3:2024(Main)
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
SIST EN IEC 60034-2-3:2024

IEC 60034-2-3:2024 specifies test methods and an interpolation procedure for determining losses and efficiencies of converter-fed motors. The motor is then part of a variable frequency power drive system (PDS) as defined in IEC 61800‑9‑2. This document also specifies procedures to determine motor losses at any load point (torque, speed) within the constant flux range (constant torque range, base speed range), the field weakening range and the overload range based on determination of losses at seven standardized load points. This procedure is applicable to any variable speed AC motor (induction and synchronous) rated according to IEC 60034-1 for operation on a variable frequency and variable voltage power supply. This second edition cancels and replaces the first edition of IEC 60034-2-3 published in 2020. This edition includes the following significant technical changes with respect to the previous edition: - Harmonization of requirements and procedures with IEC 60034-2-1. - Extension of the interpolation procedure to the field weakening range.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-2-1:2024(Main)
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
SIST EN IEC 60034-2-1:2024

IEC 60034-2-1:2024 is available as IEC 60034-2-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-2-1:2024 is intended to establish methods of determining efficiencies from tests, and also to specify methods of obtaining specific losses. This document applies to DC machines and to AC synchronous and induction machines of all sizes within the scope of IEC 60034-1 rated for mains operation. These methods may be applied to other types of machines such as rotary converters, AC commutator motors and single-phase induction motors. This third edition cancels and replaces the second edition of IEC 60034-2-1 published in 2014. This edition includes the following significant technical changes with respect to the previous edition: - Harmonization of layout and requirements with IEC 60034-2-2 and IEC 60034-2-3.

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-30-3:2024(Main)
Rotating electrical machines - Part 30-3: Efficiency classes of high voltage AC motors (IE-code)
SIST EN IEC 60034-30-3:2024

IEC 60034-30-3:2024 specifies efficiency classes for fixed-speed three-phase high-voltage cage induction motors in accordance with IEC 60034-1 that - have a rated voltage exceeding 1 000 V, but not exceeding 11 kV; - have a rated power from 200 kW to 2 000 kW; This document provides the global harmonization of energy-efficiency classes of three-phase cage induction motors with rated voltage above 1 000 V that are rated for direct online starting and fixed-speed operation at a 50 Hz or 60 Hz supply with sinusoidal voltage.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 60034-25:2024(Main)
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
SIST-TS CLC IEC/TS 60034-25:2024

IEC TS 60034-25:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC TS 60034-25:2022 edition 4.0 and the previous IEC TS 60034-25:2014 edition 3.0. Furthermore, comments from IEC TC 2 experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content.

  • Technical specification
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day