EN IEC 62769-100:2020

Field device integration (FDI) - Part 100: Profiles - Generic protocols

IEC 62769-100:2020 specifies an FDI profile of IEC 62769 for generic protocols. That means that all interfaces are defined, and a host can add support for more protocols without changing its implementation. Nevertheless, there are some protocol-specific definitions (PSD) that need to be specified per protocol using this profile. Annex C specifies what PSDs need to be defined per protocol so that FDI Device Packages, FDI Communication Packages for Gateways and FDI Communication Servers, FDI Communication Servers, Gateways and Devices supporting such a protocol can work together in a host not aware about this specific protocol.

Feldgeräteintegration (FDI) - Teil 100: Profile - Allgemeine Protokolle

Intégration des appareils de terrain (FDI) - Partie 100: Profils - Protocoles génériques

L'IEC 62769-100:2020 spécifie un profil FDI de l'IEC 62769 pour les protocoles génériques. Cela signifie que toutes les interfaces sont définies et qu'un hôte peut ajouter la prise en charge de plusieurs protocoles sans modifier sa mise en œuvre. Néanmoins, il est nécessaire de spécifier certaines définitions spécifiques au protocole (PSD) à l'aide de ce profil. L'Annexe C spécifie les PSD qu’il est nécessaire de définir par protocole, de sorte que les Paquetages d'appareils FDI, les Paquetages de communication FDI pour les Passerelles et les Serveurs de communication FDI, les Serveurs de communication FDI, les Passerelles et les Appareils prenant en charge ce type de protocole puissent fonctionner ensemble dans un hôte, quel que soit ce protocole spécifique.

Vključitev procesne terenske naprave (FDI) - 100. del: Profili - Splošni protokoli (IEC 62769-100:2020)

General Information

• Status: Published
• Publication Date: 05-Nov-2020
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 06-Nov-2020
• Completion Date: 06-Nov-2020
• Ref Project: SIST EN IEC 62769-100:2021 - Field device integration (FDI) - Part 100: Profiles - Generic protocolsi (IEC 62769-100:2020)

Relations

• Replaced By: EN IEC 62769-100:2023 - Field device integration (FDI®) - Part 100: Profiles - Generic protocols
• Effective Date: 09-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2021
Vključitev procesne terenske naprave (FDI) - 100. del: Profili - Splošni protokoli
(IEC 62769-100:2020)
Field device integration (FDI) - Part 100: Profiles - Generic protocolsi (IEC 62769-
100:2020)
Feldgeräteintegration (FDI) - Teil 100: Profile - Allgemeine Protokolle (IEC 62769-
100:2020)
Intégration des appareils de terrain (FDI) - Partie 100: Profils - Protocoles génériques
(IEC 62769-100:2020)
Ta slovenski standard je istoveten z: EN IEC 62769-100:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62769-100

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 25.040.40; 35.100.05
English Version
Field device integration (FDI) - Part 100: Profiles - Generic
protocols
(IEC 62769-100:2020)
Intégration des appareils de terrain (FDI) - Partie 100: Feldgeräteintegration (FDI) - Teil 100: Profile - Allgemeine
Profils - Protocoles génériques Protokolle
(IEC 62769-100:2020) (IEC 62769-100:2020)
This European Standard was approved by CENELEC on 2020-10-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-100:2020 E

European foreword
The text of document 65E/739/FDIS, future edition 1 of IEC 62769-100, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-07-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-10-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62769-100:2020 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61804 series Function blocks (FB) for process control and EN IEC 61804 series
electronic device description language
(EDDL)
IEC 61804-3 - Devices and integration in enterprise EN IEC 61804-3 -
systems - Function blocks (FB) for process
control and electronic device description
language (EDDL) - Part 3: EDDL syntax and
semantics
IEC 62541-100 2015 OPC Unified Architecture - Part 100: Device EN 62541-100 2015
Interface
IEC 62769-2 - Field Device Integration (FDI) - Part 2: FDI - -
Client
IEC 62769-4 - Field Device Integration (FDI) - Part 4: FDI - -
Packages
IEC 62769-5 - Field Device Integration (FDI) - Part 5: FDI - -
Information Model
IEC 62769-7 - Field Device Integration (FDI) - Part 7: FDI - -
Communication Devices
IEC 62769-100 ®
Edition 1.0 2020-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Field device integration (FDI) –

Part 100: Profiles – Generic protocols

Intégration des appareils de terrain (FDI) –

Partie 100: Profils – Protocoles génériques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-8858-0

– 2 – IEC 62769-100:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and conventions . 6
3.1 Abbreviated terms . 7
3.2 Conventions . 7
3.2.1 EDDL syntax. 7
3.2.2 XML syntax . 7
3.2.3 Capitalizations . 7
4 Profile for Generic Protocols . 8
4.1 General . 8
4.2 Catalog profile . 8
4.2.1 Protocol support file . 8
4.2.2 CommunicationProfile definition . 8
4.2.3 Profile device . 8
4.2.4 Protocol version information . 9
4.3 Associating a Package with a device . 9
4.3.1 Device type identification mapping . 9
4.3.2 Device type revision mapping . 10
4.4 Information Model mapping . 10
4.4.1 ProtocolType definition . 10
4.4.2 DeviceType mapping . 11
4.4.3 FunctionalGroup identification definition . 11
4.5 Topology elements . 12
4.5.1 ConnectionPoint definition . 12
4.5.2 Communication Device definition . 13
4.5.3 Communication service provider definition . 14
4.5.4 Network definition . 14
4.6 Methods . 15
4.6.1 Methods for FDI Communication Servers . 15
4.6.2 Methods for Gateways . 19
4.6.3 Transfer service parameters . 26
Annex A (normative) Topology Scan result schema . 27
A.1 General . 27
A.2 Network . 27
A.3 GenericNetworkT . 27
A.4 GenericConnectionPointT . 27
A.5 GenericIdentificationT . 28
A.6 GenericAddressT . 29
Annex B (normative) Transfer service parameters . 30
B.1 General . 30
B.2 sendData . 30
B.3 receiveData . 30
B.4 TransferSendDataT . 30
B.5 EddDataTypeInfoListT . 31

IEC 62769-100:2020 © IEC 2020 – 3 –
B.6 EddDataTypeInfoT . 31
B.7 EddDataTypeT . 32
B.8 TransferResultDataT . 33
Annex C (normative) Protocol-specific definitions . 34
C.1 General . 34
C.2 Header . 34
C.3 ProtocolIdentifier . 34
C.4 Address . 34
C.5 Manufacturer . 34
C.6 DeviceModel . 35
C.7 DeviceRevision . 35
C.8 SerialNumber . 35
C.9 Tag . 35
C.10 ProfileId . 35
C.11 Version . 36
C.12 ProtocolSupportFile . 36
Bibliography . 37

Table 1 – ProtocolSupportFile for FDI Device Packages . 8
Table 2 – Catalog values for profile devices . 9
Table 3 – Device identification information mapping . 10
Table
...