Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

IEC 60603-7-81:2015 Covers 8-way, shielded, free and fixed connectors, references dimensional, mechanical, electrical and environmental characteristics and tests in IEC 60603-7, and specifies electrical transmission requirements, including power sum alien (exogenous) crosstalk, for frequencies up to 2 000 MHz. These connectors are typically used as "category 8.1" connectors in "class I" cabling systems specified in ISO/IEC 11801. These connectors are intermateable and interoperable with other IEC 60603-7 series connectors as defined in Clause 2 of IEC 60603-7. These connectors are backward compatible with other IEC 60603-7 series connectors, except IEC 60603-7-7 and IEC 60603-7-71 connectors. Key words: Connectors, Shielded, Free and Fixed Connectors

Steckverbinder für elektronische Einrichtungen - Teil 7-81: Bauartspezifikation für geschirmte freie und feste Steckverbinder, 8polig, für Datenübertragungen bis 2 000 MHz

Connecteurs pour équipements électroniques - Partie 7-81: Spécification particulière pour les fiches et les embases blindées à 8 voies pour la transmission de données à des fréquences jusqu’à 2 000 MHz

L'IEC 60603-7-81:2015 couvre les fiches et les embases blindées à 8 voies, les caractéristiques dimensionnelles, mécaniques, électriques et environnementales de référence et les essais de l'IEC 60603-7, et elle spécifie les exigences de transmission électrique, y compris la puissance cumulée de la diaphonie exogène, pour des fréquences jusqu'à 2 000 MHz. Ces connecteurs sont généralement utilisés comme des connecteurs de la "catégorie 8.1" dans des systèmes de câblage de "classe I" spécifiés dans l'ISO/IEC 11801. Ces connecteurs sont accouplables et interopérables avec d'autres connecteurs de la série IEC 60603-7 comme cela est défini à l'Article 2 de l'IEC 61603-7. Ces connecteurs présentent une compatibilité amont avec d'autres connecteurs de la série IEC 60603-7, à l'exception des connecteurs des normes IEC 60603-7-7 et IEC 60603-7-71. Mots-clés: connecteurs, fiches, embases blindées

Konektorji za elektronsko opremo - 7-81. del: Podrobna specifikacija za 8-polne, oklepljene, proste in pritrjene konektorje za prenos podatkov s frekvencami do 2000 MHz (IEC 60603-7-81:2015)

Ta del standarda IEC 60603 vključuje 8-polne, oklepljene, proste in pritrjene konektorje, se sklicuje na dimenzionalne, mehanske, električne in okoljske karakteristike ter preskuse iz standarda IEC 60603-7 ter določa zahteve glede električnega prenosa, vključno s tujerodnim (eksogenim) prisluhom, za frekvence do 2000 MHz.
Ti konektorji se običajno uporabljajo kot konektorji »kategorije 8.1« in kabelski sistemi »razreda I«, določeni v standardu ISO/IEC 11801.
Te konektorje je mogoče spojiti in souporabljati skupaj z drugimi konektorji iz skupine standardov IEC 60603-7, kot je opredeljeno v točki 2 standarda IEC 60603-7.
Ti konektorji so povratno združljivi z drugimi konektorji iz skupine standardov IEC 60603-7, razen s konektorji iz standardov IEC 60603-7-7 in IEC 60603-7-71.
OPOMBA: Kategorije učinkovitosti prenosa: v tem standardu se izraz »kategorija«, ko se sklicuje na učinkovitost prenosa, nanaša na kategorije, opredeljene v standardu ISO/IEC 11801.

General Information

Status
Published
Publication Date
07-Apr-2016
Withdrawal Date
19-Jan-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
08-Apr-2016
Completion Date
08-Apr-2016

Relations

Buy Standard

Standard
EN 60603-7-81:2016
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60603-7-81:2016
01-julij-2016
Konektorji za elektronsko opremo - 7-81. del: Podrobna specifikacija za 8-polne,
oklepljene, proste in pritrjene konektorje za prenos podatkov s frekvencami do
2000 MHz (IEC 60603-7-81:2015)
Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded,
free and fixed connectors, for data transmissions with frequencies up to 2 000 mhz (IEC
60603-7-81:2015)
Ta slovenski standard je istoveten z: EN 60603-7-81:2016
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60603-7-81:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60603-7-81:2016

---------------------- Page: 2 ----------------------

SIST EN 60603-7-81:2016


EUROPEAN STANDARD EN 60603-7-81

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2016
ICS 31.220.10

English Version
Connectors for electronic equipment -
Part 7-81: Detail specification for 8-way, shielded, free and fixed
connectors, for data transmissions with frequencies
up to 2 000 MHz
(IEC 60603-7-81:2015)
Connecteurs pour équipements électroniques -  Steckverbinder für elektronische Einrichtungen -
Partie 7-81: Spécification particulière pour les fiches et les Teil 7-81: Bauartspezifikation für geschirmte freie und feste
embases blindées à 8 voies pour la transmission de Steckverbinder, 8polig, für Datenübertragungen bis 2 000
données à des fréquences jusqu'à 2 000 MHz MHz
(IEC 60603-7-81:2015) (IEC 60603-7-81:2015)
This European Standard was approved by CENELEC on 2016-01-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60603-7-81:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60603-7-81:2016
EN 60603-7-81:2016
European foreword
The text of document 48B/2451/FDIS, future edition 1 of IEC 60603-7-81, prepared by
SC 48B “Electrical connectors” of IEC/TC 48 “Electrical connectors and mechanical structures for
electrical and electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 60603-7-81:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-10-20
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-01-20
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60603-7-81:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60603-7-2:2010 NOTE Harmonized as EN 60603-7-2:2010 (not modified).
IEC 60603-7-3:2010 NOTE Harmonized as EN 60603-7-3:2010 (not modified).
IEC 60603-7-4:2010 NOTE Harmonized as EN 60603-7-4:2010 (not modified).
IEC 60603-7-41:2010 NOTE Harmonized as EN 60603-7-41:2010 (not modified).
IEC 60603-7-51:2010 NOTE Harmonized as EN 60603-7-51:2010 (not modified).
IEC 60603-7-7:2010 NOTE Harmonized as EN 60603-7-7:2010 (not modified).
IEC 60603-71:2010 NOTE Harmonized as EN 60603-71:2010 (not modified).
2

---------------------- Page: 4 ------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.