Radio-frequency connectors - Part 66: Sectional specification for RF coaxial connectors with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling, characteristic impedance 50 Ω (series 2,2-5)

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series 2,2-5 RF coaxial connectors with quick-lock- or screw coupling, characteristic impedance 50 Ω, for operating frequencies up to 6 GHz. Typical use is in wireless telecommunication systems. It describes mating face dimensions for general purpose connectors - grade 2, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series 2,2-5 RF connectors. This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.

Hochfrequenz-Steckverbinder - Teil 66: Rahmenspezifikation für koaxiale HF-Steckverbinder mit 5 mm Innendurchmesser des Außenleiters, mit Schraub- oder Schnellverriegelungs-Kupplung, Wellenwiderstand 50 Ohm (Reihe 2.2-5)

Connecteurs pour fréquences radioélectriques - Partie 66: Spécification intermédiaire relative aux connecteurs coaxiaux pour fréquences radioélectriques avec diamètre intérieur du conducteur extérieur de 5 mm à couplage à verrouillage rapide ou à vis, impédance caractéristique de 50 Ω (série 2,2-5)

IEC 61169-66:2021 fournit des informations et des règles en vue de l’établissement de spécifications particulières (SP) pour des connecteurs coaxiaux pour fréquences radioélectriques à couplage de type à vis ou à verrouillage rapide de la série 2,2-5, avec impédance caractéristique de 50 Ω, de fréquence de fonctionnement allant jusqu’à 6 GHz. L’utilisation type est celle dans les systèmes de télécommunication sans fil. Elle décrit les dimensions des faces d’accouplement pour des connecteurs généraux de classe 2, ainsi que des informations concernant les calibres et les essais choisis dans l’IEC 61169-1, applicables à toutes les spécifications particulières ayant trait aux connecteurs pour fréquences radioélectriques de la série 2,2-5. La présente spécification indique les caractéristiques de performance recommandées à prendre en considération pour rédiger une spécification particulière, et elle couvre les programmes d'essai et les exigences de contrôle pour les niveaux d'assurance qualité M et H.

Radiofrekvenčni konektorji - 66. del: Področna specifikacija za radiofrekvenčne (RF) koaksialne konektorje z notranjim premerom zunanjih vodnikov 5 mm z zaklepno ali vijačno sklopko, karakteristična impedanca 50 Ohm (serija 2,2-5) (IEC 61169-66:2021)

General Information

Status
Published
Publication Date
01-Apr-2021
Current Stage
6060 - Document made available - Publishing
Start Date
02-Apr-2021
Completion Date
02-Apr-2021

Buy Standard

Standard
EN IEC 61169-66:2021
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61169-66:2021
01-junij-2021
Radiofrekvenčni konektorji - 66. del: Področna specifikacija za radiofrekvenčne
(RF) koaksialne konektorje z notranjim premerom zunanjih vodnikov 5 mm z
zaklepno ali vijačno sklopko, karakteristična impedanca 50 Ohm (serija 2,2-5) (IEC
61169-66:2021)
Radio-frequency connectors - Part 66: Sectional specification for RF coaxial connectors
with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling,
characteristic impedance 50 Ohm (series 2,2-5) (IEC 61169-66:2021)
Hochfrequenz-Steckverbinder – Teil 66: Rahmenspezifikation für koaxiale HF-
Steckverbinder mit 5 mm Innendurchmesser des Außenleiters, mit Schraub- oder
Schnapp-Kupplung, Wellenwiderstand 50 Ohm, für den Einsatz bis zu 6 GHz – Typ 2.2-5
(IEC 61169-66:2021)
Connecteurs pour fréquences radioélectriques - Partie 66 : Spécification intermédiaire
relative aux connecteurs coaxiaux pour fréquences radioélectriques avec diamètre
intérieur du conducteur extérieur de 5 mm à couplage à verrouillage rapide ou à vis,
impédance caractéristique de 50 Ω (série 2,2-5) (IEC 61169-66:2021)
Ta slovenski standard je istoveten z: EN IEC 61169-66:2021
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
SIST EN IEC 61169-66:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61169-66:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61169-66:2021


EUROPEAN STANDARD EN IEC 61169-66

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2021
ICS 33.120.30

English Version
Radio-frequency connectors - Part 66: Sectional specification for
RF coaxial connectors with 5 mm inner diameter of outer
conductor, with quick-lock- or screw-coupling, characteristic
impedance 50 O (series 2,2-5)
(IEC 61169-66:2021)
Connecteurs pour fréquences radioélectriques - Partie 66: Hochfrequenz-Steckverbinder - Teil 66:
Spécification intermédiaire relative aux connecteurs Rahmenspezifikation für koaxiale HF-Steckverbinder mit 5
coaxiaux pour fréquences radioélectriques avec diamètre mm Innendurchmesser des Außenleiters, mit Schraub- oder
intérieur du conducteur extérieur de 5 mm à couplage à Schnellverriegelungs-Kupplung, Wellenwiderstand 50 Ohm
verrouillage rapide ou à vis, impédance caractéristique de (Reihe 2.2-5)
50 O (série 2,2-5) (IEC 61169-66:2021)
(IEC 61169-66:2021)
This European Standard was approved by CENELEC on 2021-03-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61169-66:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61169-66:2021
EN IEC 61169-66:2021 (E)
European foreword
The text of document 46F/543/FDIS, future edition 1 of IEC 61169-66, prepared by SC 46F "RF and
microwave passive components" of IEC/TC 46 "Cables, wires, waveguides, RF connectors, RF and
microwave passive components and accessories" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 61169-66:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-12-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-03-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifyi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.