EN IEC/IEEE 63195-1:2023

Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) - Part 1: Measurement procedure

Identical adoption of future IEC/IEEE 63195-1 into EN IEC/IEEE 63195-1.

Bewertung der Leistungsdichte der Exposition des Menschen gegenüber hochfrequenten Feldern von drahtlosen Geräten in unmittelbarer Nähe des Kopfes und des Körpers (Frequenzbereich von 6 GHz bis 300 GHz) - Teil 1: Messverfahren

Évaluation de la densité de puissance de l'exposition humaine aux champs radiofréquences provenant de dispositifs sans fil à proximité immédiate de la tête et du corps (plage de fréquences de 6 GHz à 300 GHz) - Partie 1: Procédure de mesure

Ocenjevanje gostote moči izpostavljenosti človeka radiofrekvenčnim poljem brezžičnih naprav v neposredni bližini glave in telesa (frekvenčno območje 6 GHz do 300 GHz) - 1. del: Merilni postopek

General Information

• Status: Published
• Publication Date: 12-Jan-2023
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• Technical Committee: CLC/TC 106X - Electromagnetic fields in the human environment
• Drafting Committee: CLC/TC 106X - Electromagnetic fields in the human environment
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 13-Jan-2023
• Completion Date: 13-Jan-2023
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Mandate: M/536 - [C(2015)536] Standardisation request as regards radio equipment in support of Directive 2014/53/EU
• Ref Project: SIST EN IEC/IEEE 63195-1:2025 - Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) - Part 1: Measurement procedure

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2025
Ocenjevanje gostote moči izpostavljenosti človeka radiofrekvenčnim poljem
brezžičnih naprav v neposredni bližini glave in telesa (frekvenčno območje 6 GHz
do 300 GHz) - 1. del: Merilni postopek
Assessment of power density of human exposure to radio frequency fields from wireless
devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) -
Part 1: Measurement procedure
Bewertung der Leistungsdichte der Exposition des Menschen gegenüber
hochfrequenten Feldern von drahtlosen Geräten in unmittelbarer Nähe des Kopfes und
des Körpers (Frequenzbereich von 6 GHz bis 300 GHz) - Teil 1: Messverfahren
Évaluation de la densité de puissance de l'exposition humaine aux champs
radiofréquences provenant de dispositifs sans fil à proximité immédiate de la tête et du
corps (plage de fréquences de 6 GHz à 300 GHz) - Partie 1: Procédure de mesure
Ta slovenski standard je istoveten z: EN IEC/IEEE 63195-1:2023
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC/IEEE 63195-1

NORME EUROPÉENNE
EUROPÄISCHE NORM January 2023
ICS 17.220.20
English Version
Assessment of power density of human exposure to radio
frequency fields from wireless devices in close proximity to the
head and body (frequency range of 6 GHz to 300 GHz) - Part 1:
Measurement procedure
(IEC/IEEE 63195-1:2022)
Évaluation de la densité de puissance de l'exposition Bewertung der Leistungsdichte der Exposition des
humaine aux champs radiofréquences provenant de Menschen gegenüber hochfrequenten Feldern von
dispositifs sans fil à proximité immédiate de la tête et du drahtlosen Geräten in unmittelbarer Nähe des Kopfes und
corps (plage de fréquences de 6 GHz à 300 GHz) - des Körpers (Frequenzbereich von 6 GHz bis 300 GHz) -
Partie 1: Procédure de mesure Teil 1: Messverfahren
(IEC/IEEE 63195-1:2022) (IEC/IEEE 63195-1:2022)
This European Standard was approved by CENELEC on 2023-01-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC/IEEE 63195-1:2023 E

European foreword
This document (EN IEC/IEEE 63195-1:2023) consists of the text of document IEC/IEEE 63195-1:2022,
prepared by IEC/TC 106 "Methods for the assessment of electric, magnetic and electromagnetic fields
associated with human exposure".
The following dates are fixed:
• latest date by which this document has to be (dop) 2024-01-09
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2026-01-09
conflicting with this document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC/IEEE 63195-1:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
ISO/IEC 17025:2017 NOTE Harmonized as EN ISO/IEC 17025:2017 (not modified)
IEC 62311:2019 NOTE Harmonized as EN IEC 62311:2020 (not modified)
ISO/IEC 17043:2010 NOTE Harmonized as EN ISO/IEC 17043:2010 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC/IEEE 62209- 2020 Measurement procedure for the EN IEC/IEEE 62209- 2021
1528 assessment of specific absorption rate of 1528
human exposure to radio frequency fields
from hand-held and body-worn wireless
communication devices - Part 1528:
Human models, instrumentation and
procedures (Frequency range of 4 MHz to
10 GHz)
IEC/IEEE 63195-2 2022 Assessment of power density of human EN IEC/IEEE 63195-2 2023
exposure to radio frequency fields from
wireless devices in close proximity to the
head and body (Frequency range of 6 GHz
to 300 GHz) – Part 2: Computational
procedure
IEC/IEEE 63195-1 ®
Edition 1.0 2022-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Assessment of power density of human exposure to radio frequency fields from

wireless devices in close proximity to the head and body (frequency range of

6 GHz to 300 GHz) –
Part 1: Measurement procedure
Évaluation de la densité de puissance de l'exposition humaine aux champs

radiofréquences provenant de dispositifs sans fil à proximité immédiate de la

tête et du corps (plage de fréquences de 6 GHz à 300 GHz) –

Partie 1: Procédure de mesure
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.20 ISBN 978-2-8322-0123-7

– 2 – IEC/IEEE 63195-1:2022 © IEC/IEEE 2022
CONTENTS
FOREWORD . 9
INTRODUCTION . 11
1 Scope . 12
2 Normative references . 13
3 Terms and definitions . 13
3.1 Exposure metrics and parameters . 13
3.2 Spatial, physical, and geometrical parameters associated with exposure
metrics . 16
3.3 Measurement instrumentation, field probe, and data-processing parameters . 17
3.4 RF power parameters . 20
3.5 Test device technical operating and antenna parameters . 21
3.6 Test device physical configurations . 23
3.7 Uncertainty parameters . 24
4 Symbols and abbreviated terms . 25
4.1 Symbols . 25
4.1.1 Physical quantities . 25
4.1.2 Constants . 26
4.2 Abbreviated terms . 26
5 Quick start guide and application of this document . 27
5.1 Quick start guide . 27
5.2 Application of this document . 30
5.3 Stipulations . 30
6 Measurement system and laboratory requirements . 30
6.1 General requirements . 30
6.2 Laboratory requirements . 31
6.3 Field probe requirements . 32
6.4 Measurement instrumentation requirements . 32
6.5 Scanning system requirements . 33
6.5.1 Single-probe systems . 33
6.5.2 Multiple field-probe systems . 33
6.6 Device holder requirements . 34
6.7 Post-processing quantities, procedures, and requirements . 35
6.7.1 Formulas for calculation of sPD . 35
6.7.2 Post-processing procedure . 37
6.7.3 Requirements . 38
7 Protocol for PD assessment . 39
7.1 General . 39
7.2 Measurement preparation . 39
7.2.1 Relative system check . 39
7.2.2 DUT requirements . 39
7.2.3 DUT preparation . 40
7.2.4 Selecting evaluation surfaces . 41
7.3 Tests to be performed . 44
7.3.1 General . 44
7.3.2 Tests to be performed when supported by simulations of the antenna
array . 46
7.3.3 Tests to be performed by measurements of the antenna array . 48

IEC/IEEE 63195-1:2022 © IEC/IEEE 2022 – 3 –
7.4 Measurement procedure . 48
7.4.1 General measurement procedure . 48
7.4.2 Power density assessment methods . 49
7.4.3 Power scaling for operating mode and channel . 51
7.4.4 Correction for DUT drift . 53
7.5 Exposure combining. 54
7.5.1 General . 54
7.5.2 Combining power density and SAR results .
...