EN 61300-2-38:2006

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures

Presents a method for testing the sealing performance of a fibre optic closure and sealing system of the closures, when required by the relevant specification.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-38: Prüfungen - Dichtheit druckfester Muffen für Lichtwellenleiterbauteile

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-38: Essais - Etanchéité pour les boîtiers à fibres optiques à surpression interne

Cette partie de la CEI 61300, quand elle est exigée par la spécification applicable, décrit une méthode pour déterminer les performances d'étanchéité de boîtiers de fibres optiques, et du système d'étanchéité des boîtiers.

Optični spojni elementi in pasivne komponente – Osnovni preskuševalni in merilni postopki – 2-38. del: Preskušanje – Tesnjenje ohišij optičnih kablov, ki so pod tlakom (IEC 61300-2-38:2006)

General Information

• Status: Published
• Publication Date: 27-Nov-2006
• Withdrawal Date: 30-Sep-2009
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Nov-2006
• Completion Date: 28-Nov-2006
• Ref Project: SIST EN 61300-2-38:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre optic closures

Relations

• Replaces: EN 61300-2-38:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized closures of fibre optic devices
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61300-2-38:2023 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for fibre optic sealed closures and hardened connectors using air pressure
• Effective Date: 04-Jan-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-38:2007
01-september-2007
1DGRPHãþD
SIST EN 61300-2-38:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH±2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNL±GHO3UHVNXãDQMH±7HVQMHQMHRKLãLMRSWLþQLKNDEORYNLVRSRG
WODNRP,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre optic
closures (IEC 61300-2-38:2006)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-38: Prüfungen - Dichtheit druckfester Muffen für
Lichtwellenleiterbauteile (IEC 61300-2-38:2006)
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-38: Essais - Etanchéité pour les
boîtiers a fibres optiques a surpression interne (IEC 61300-2-38:2006)
Ta slovenski standard je istoveten z: EN 61300-2-38:2006
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-38:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-2-38

NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-38:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 2-38: Tests -
Sealing for pressurized fibre optic closures
(IEC 61300-2-38:2006)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures Grundlegende Prüf- und Messverfahren
Partie 2-38: Essais - Teil 2-38: Prüfungen -
Etanchéité pour les boîtiers Dichtheit druckfester Muffen
à fibres optiques à surpression interne für Lichtwellenleiterbauteile
(CEI 61300-2-38:2006) (IEC 61300-2-38:2006)




This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-38:2006 E

---------------------- Page: 2 ----------------------

EN 61300-2-38:2006 - 2 -
Foreword
The text of document 86B/2346/FDIS, future edition 2 of IEC 61300-2-38, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-38 on 2006-10-01.
This European Standard supersedes EN 61300-2-38:1997.
Specific technical changes from EN 61300-2-38:1997 include the specifications of more strict and more
detailed sealing properties.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-38:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-38:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the editi
...