EN 60068-2-18:2017
(Main)Environmental testing - Part 2-18: Tests – Test R and guidance: Water
Environmental testing - Part 2-18: Tests – Test R and guidance: Water
NEW!IEC 60068-2-18:2017 is available as IEC 60068-2-18:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-2-18:2017 provides methods of test applicable to products which, during transportation, storage or in service, can be subjected to falling water drops, impacting water, immersion or high pressure water impact. The primary purpose of water tests is to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order after and, when necessary, under a standardized drop field or immersion in water. These tests are not corrosion tests and cannot be considered and used as such. Established water tests in other standards are not intended to simulate natural rainfall and their quoted intensities are too high to be adopted for that purpose. Therefore, in addition to the high-intensity severities, test R includes an artificial rain test based upon natural conditions but not taking into account high wind speeds generally associated with natural rain. Guidance is given on the applicability of the tests and the severities to be selected. This third edition cancels and replaces the second edition published in 2000. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a. addition of the new test method Rb 3.
Umgebungseinflüsse - Teil 2-18: Prüfverfahren - Prüfung R und Leitfaden: Wasser
Essais d’environnement - Partie 2-18: Essais – Essai R et guide: Eau
NEW!IEC 60068-2-18:2017 est disponible sous forme de IEC 60068-2-18:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 60068-2-18:2017 spécifie les méthodes d’essai applicables aux produits qui, pendant leur transport, leur stockage, ou alors qu’ils sont en service, peuvent être soumis à des chutes de gouttes d'eau, à des projections d’eau, à une immersion ou à des projections d’eau à haute pression. Le but premier des essais d’eau est de vérifier l’aptitude des enveloppes, des couvercles et des joints d’étanchéité à maintenir les composants et les matériels en bon état de marche après et, si besoin, pendant un arrosage par des gouttes d’eau ou une immersion dans l’eau normalisée. Ces essais ne sont pas des essais de corrosion et ne peuvent pas être considérés ou utilisés comme tels. Les essais d’eau déjà établis dans d’autres normes ne sont pas destinés à simuler les chutes de pluie naturelles et leurs intensités correspondantes sont trop élevées pour être utilisées dans ce but. En conséquence, en plus des sévérités de forte intensité, l’essai R comprend un essai de pluie artificielle basé sur des conditions naturelles, mais sans tenir compte des grands vents qui sont généralement associés à la pluie naturelle. Des préconisations sont données sur l’applicabilité des essais et sur les sévérités à choisir. Cette troisième édition annule et remplace la deuxième édition parue en 2000. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a. ajout de la nouvelle méthode d'essai Rb 3.
Okoljsko preskušanje - 2-18. del: Preskusi - Preskus R in navodilo: Voda (IEC 60068-2-18:2017)
Ta del standarda IEC 60068 podaja preskusne metode za uporabo pri proizvodih, ki so lahko med prevozom, skladiščenjem ali uporabo izpostavljeni padajočim vodnim kapljam, vplivom vode, potopitvi ali vodnim curkom pod visokim tlakom. Osnovni namen preskusov z vodo je preverjanje, ali so ohišja, pokrovi in tesnila zmožni zagotoviti ustrezno delovno stanje sestavnih delov in opreme po (ter po potrebi pri) standardiziranem kapljičnem polju ali potopitvi v vodo.
Ti preskusi niso preskusi korozivnosti in jih ni mogoče obravnavati ali uporabljati kot take. Vzpostavljeni preskusi z vodo v drugih standardih niso namenjeni simulaciji naravnega dežja in njihove navedene intenzitete so previsoke za ta namen. Poleg zahtevnosti visoke intenzitete preskus R zaradi tega vključuje preskus z umetnim dežjem na podlagi naravnih pogojev, vendar ob neupoštevanju visokih hitrosti vetra, ki so običajno povezane z naravnim dežjem. Standard podaja smernice glede uporabnosti preskusov in izbire zahtevnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60068-2-18:2017
01-september-2017
1DGRPHãþD
SIST EN 60068-2-18:2002
Okoljsko preskušanje - 2-18. del: Preskusi - Preskus R in navodilo: Voda (IEC
60068-2-18:2017)
Environmental testing - Part 2-18: Tests - Tests R and guidance: Water (IEC 60068-2-
18:2017)
Umweltprüfungen - Teil 2-18: Prüfungen, Prüfung R und Leitfaden: Wasser (IEC 60068-2
-18:2017)
Essais d'environnement - Partie 2-18: Essais - Essai R et guide: Eau (IEC 60068-2-
18:2017)
Ta slovenski standard je istoveten z: EN 60068-2-18:2017
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST EN 60068-2-18:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60068-2-18:2017
---------------------- Page: 2 ----------------------
SIST EN 60068-2-18:2017
EUROPEAN STANDARD EN 60068-2-18
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2017
ICS 19.040 Supersedes EN 60068-2-18:2001
English Version
Environmental testing -
Part 2-18: Tests - Test R and guidance: Water
(IEC 60068-2-18:2017)
Essais d'environnement - Umgebungsprüfungen -
Partie 2-18: Essais - Essai R et guide: Eau Teil 2-18: Prüfungen, Prüfung R und Leitfaden: Wasser
(IEC 60068-2-18:2017) (IEC 60068-2-18:2017)
This European Standard was approved by CENELEC on 2017-04-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60068-2-18:2017 E
---------------------- Page: 3 ----------------------
SIST EN 60068-2-18:2017
EN 60068-2-18:2017
European foreword
The text of document 104/719/FDIS, future edition 3 of IEC 60068-2-18, prepared by
IEC/TC 104 "Environmental conditions, classification and methods of test" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 60068-2-18:2017.
The following dates are fixed:
(dop) 2018-01-14
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-04-14
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60068-2-18:2001.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60068-2-18:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60529 NOTE Harmonized as EN 60529.
2
---------------------- Page: 4 ----------------------
SIST EN 60068-2-18:2017
IEC 60068-2-18
®
Edition 3.0 2017-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Environmental testing –
Part 2-18: Tests – Test R and guidance: Water
Essais d’environnement –
Partie 2-18: Essais – Essai R et guide: Eau
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 19.040 ISBN 978-2-8322-4019-9
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International El
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.