EN 60794-1-2:2014
(Main)Optical fibre cables - Part 1-2: Generic specification - Cross reference table for optical cable test procedures
Optical fibre cables - Part 1-2: Generic specification - Cross reference table for optical cable test procedures
IEC 60794-1-2:2013(E) applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. The object of this standard is to provide the end user with a cross reference table between the second edition of IEC 60794-1-2:2003 and the five new separate parts into which is has now been split up, namely: - IEC 60794-1-2, Cross reference table, - IEC 60794-1-20, General and definitions, - IEC 60794-1-21, Mechanical tests, - IEC 60794-1-22, Environmental tests, - IEC 60794-1-23, Cable elements tests and - IEC 60794-1-24, Electrical tests. This third edition of IEC 60794-1-2 cancels and replaces the second edition published in 2003. It constitutes a technical revision. This standard is intended to be used in conjunction with IEC 60794-1-1. Keywords: cross reference table, optical fibre cables for use with telecommunication equipment
Lichtwellenleiterkabel - Teil 1-2: Fachgrundspezifikation - Kreuzverweistabelle für Prüfverfahren für Lichtwellenleiterkabel
Câbles à fibres optiques – Partie 1-2: Spécification générique - Table des références croisées relative aux procédures d'essais des câbles optiques
L'IEC 60794-1-2:2013 s'applique aux câbles à fibres optiques destinés à être utilisés avec les équipements de télécommunication et les dispositifs employant des techniques similaires, et aux câbles constitués d'une combinaison de fibres optiques et de conducteurs électriques. L'objet de la présente norme est de fournir à l'utilisateur final une table des références croisées entre la deuxième édition de CEI 60794-1-2 et la présente troisième édition, qui a été établie après scindement de la CEI 60794-1-2, à savoir: CEI 60794-1-2, Table des références croisées CEI 60794-1-20, Généralités and définitions CEI 60794-1-21, Essais mécaniques CEI 60794-1-22, Essais environnementaux CEI 60794-1-23, Eléments du câble CEI 60794-1-24, Essais électriques Mots clés: table des références croisées, fibres optiques destinés à être utilisés avec les équipements de télécommunication
Optični kabli - 1-2. del: Rodovna specifikacija - Sklicevalna preglednica za preskusne postopke pri optičnih kablih (IEC 60794-1-2:2013)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Optical fibre cables - Part 1-2: Generic specification - Cross reference table for optical cable test procedures33.180.10Fibres and cablesICS:Ta slovenski standard je istoveten z:EN 60794-1-2:2014SIST EN 60794-1-2:2014en01-april-2014SIST EN 60794-1-2:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60794-1-2 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2014
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-1-2:2014 E
ICS 33.180.10 Supersedes EN 60794-1-2:2003 (partially)
English version
Optical fibre cables -
Part 1-2: Generic specification -
Cross reference table for optical cable test procedures (IEC 60794-1-2:2013)
Câbles à fibres optiques – Partie 1-2: Spécification générique -
Table des références croisées relative aux procédures d'essais des câbles optiques (CEI 60794-1-2:2013)
Lichtwellenleiterkabel -
Teil 1-2: Fachgrundspezifikation -
Kreuzverweistabelle für Prüfverfahren für Lichtwellenleiterkabel (IEC 60794-1-2:2013)
This European Standard was approved by CENELEC on 2013-10-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 86A/1475/CDV, future edition 3 of IEC 60794-1-2, prepared by SC 86A, "Fibres and cables", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60794-1-2:2014. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-18 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-18
This document supersedes partly EN 60794-1-2:2003. This European Standard is to be used in conjunction with EN 60794-1-1. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60794-1-2:2013 was approved by CENELEC as a European Standard without any modification. SIST EN 60794-1-2:2014
- 3 - EN 60794-1-2:2014 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year IEC 60794-1-1
Optical fibre cables -
Part 1-1: Generic specification - General EN 60794-1-1
IEC 60794-1-2 Edition 3.0 2013-09 INTERNATIONAL STANDARD Optical fibre cables – Part 1-2: Generic specification – Cross reference table for optical cable test procedures
INTERNATIONAL ELECTROTECHNICAL COMMISSION G ICS 33.180.10 PRICE CODE ISBN 978-2-8322-1101-4
– 2 – 60794-1-2 © IEC:2013(E)
CONTENTS
FOREWORD . 3 1 Scope and object . 5 2 Normative references . 5 3 Cross reference table . 5
60794-1-2 © IEC:2013(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
OPTICAL FIBRE CABLES –
Part 1-2: Generic specification – Cross reference table for optical cable test procedures
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60794-1-2 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics.
This third edition of IEC 6079
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.