EN 60384-4:2007
(Main)Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
IEC 60384-4:2007 applies to aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte primarily intended for d.c. applications for use in electronic equipment. It covers capacitors for long-life applications and capacitors for general-purpose applications. Capacitors for special-purpose applications may need additional requirements. This fourth edition cancels and replaces the third edition published in 1998 and its amendment 1 (2000). This edition constitutes a minor revision related to tables, figures and references. This bilingual version, published in 2008, corresponds to the English version. It includes Corrigendum 1 (2007).
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 4: Rahmenspezifikation - Aluminium-Elektrolyt-Kondensatoren mit festen (MnO2) und flüssigen Elektrolyten
Condensateurs fixes utilisés dans les équipements électroniques - Partie 4: Spécification intermédiaire - Condensateurs électrolytiques en aluminium à électrolyte solide (MnO2) et non solide
La CEI 60384-4:2007 s'applique aux condensateurs électrolytiques à l'aluminium, à électrolyte solide (MnO2) et non solide, destinés principalement aux applications en courant continu dans des équipements électroniques. Elle couvre les condensateurs utilisés dans des applications de longue durée de vie et les condensateurs utilisés dans des applications d'usage général. Les condensateurs pour des applications d'usage spécial peuvent nécessiter des exigences supplémentaires. Cette quatrième édition annule et remplace la troisième édition publiée en 1998, ainsi que son amendement 1 (2000). Cette édition constitue une révision mineure des tableaux, valeurs et références. La présente version bilingue, publiée en 2008, correspond à la version anglaise. Elle comprend le Corrigendum 1 (2007).
Fiksni kondenzatorji za uporabo v elektronski opremi – 4. del: Področna specifikacija - Aluminijski elektrolitski kondenzatorji s trdim (MnO2) in netrdim elektrolitom (IEC 60384-4:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2008
)LNVQLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPL±GHO 3RGURþQD
VSHFLILNDFLMD$OXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGLP 0Q2 LQQHWUGLP
HOHNWUROLWRP ,(&
Fixed capacitors for use in electronic equipment - Part 4: Sectional specification -
Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte (IEC 60384-
4:2007)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 4:
Rahmenspezifikation - Aluminium-Elektrolyt-Kondensatoren mit festen (MnO2) und
flüssigen Elektrolyten (IEC 60384-4:2007)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 4: Spécification
intermédiaire - Condensateurs électrolytiques en aluminium a électrolyte solide (MnO2)
et non solide (IEC 60384-4:2007)
Ta slovenski standard je istoveten z: EN 60384-4:2007
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60384-4
NORME EUROPÉENNE
May 2007
EUROPÄISCHE NORM
ICS 31.060.50 Supersedes EN 130300:1998
English version
Fixed capacitors for use in electronic equipment -
Part 4: Sectional specification -
Aluminium electrolytic capacitors
with solid (MnO ) and non-solid electrolyte
(IEC 60384-4:2007)
Condensateurs fixes utilisés Festkondensatoren zur Verwendung
dans les équipements électroniques - in Geräten der Elektronik -
Partie 4: Spécification intermédiaire - Teil 4: Rahmenspezifikation -
Condensateurs électrolytiques Aluminium-Elektrolyt-Kondensatoren
en aluminium à électrolyte solide (MnO ) mit festen (MnO ) und
2 2
et non solide flüssigen Elektrolyten
(CEI 60384-4:2007) (IEC 60384-4:2007)
This European Standard was approved by CENELEC on 2007-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-4:2007 E
Foreword
The text of document 40/1759/CDV, future edition 4 of IEC 60384-4, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 60384-4 on 2007-04-01.
This European Standard supersedes EN 130300:1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-4:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60384-4:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60063 - Preferred number series for resistors and - -
capacitors
1) 2)
IEC 60068-1 - Environmental testing - EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60068-2-17 - Environmental testing - EN 60068-2-17 1994
Part 2-17: Tests - Test Q: Sealing
1) 2)
IEC 60068-2-54 - Environmental testing - EN 60068-2-54 2006
Part 2-54: Tests - Test Ta: Solderability
testing of electronic components by the
wetting balance method
IEC 60384-1 (mod) 1999 Fixed capacitors for use in electronic EN 60384-1 2001
equipment - + corr. October 2001
Part 1: Generic specification
1) 2)
IEC 60384-4-1 - Fixed capacitors for use in electronic EN 60384-4-1 2007
equipment -
Part 4-1: Blank detail specification - Fixed
aluminium electrolytic capacitors with
non-solid electrolyte - Assessment level EZ
1) 2)
IEC 60384-4-2 - Fixed capacitors for use in electronic EN 60384-4-2 2007
equipment -
Part 4-2: Blank detail specification - Fixed
aluminium electrolytic capacitors with solid
(MnO ) electrolyte - Assessment level EZ
1)
ISO 3 - Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.
INTERNATIONAL IEC
STANDARD 60384-4
QC 300300
Fourth edition
2007-03
Fixed capacitors for use in electronic equipment –
Part 4:
Sectional specification –
Aluminium electrolytic capacitors with
solid (MnO ) and non-solid electrolyte
© IEC 2007 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale W
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 60384-4 © IEC:2007(E)
CONTENTS
FOREWORD.4
1 General .6
1.1 Scope.6
1.2 Object .6
1.3 Normative references .6
1.4 Information to be given in a detail specification .7
1.5 Terms and definitions .8
1.6 Marking .8
2 Preferred ratings and characteristics .9
2.1 Preferred characteristics .9
2.2 Preferred values of ratings .9
3 Quality assessment procedures.11
3.1 Primary stage of manufacture.11
3.2 Structurally similar components.11
3.3 Certified records of released lots.11
3.4 Qualification approval procedures .11
3.5 Quality conformance inspection.24
4 Test and measurement procedures.26
4.1 Pre-conditioning (for non-solid electrolyte capacitors only) .26
4.2 Visual examination and check of dimensions.26
4.3 Electrical tests.26
4.4 Robustness of terminations .29
4.5 Resistance to soldering heat .29
4.6 Solderability .29
4.7 Rapid change of temperature .30
4.8 Vibration.30
4.9 Bump .30
4.10 Shock.31
4.11 Climatic sequence .31
4.12 Damp heat, steady state.32
4.13 Endurance.32
4.14 Surge .33
4.15 Reverse voltage (if required by the detail specification) .34
4.16 Pressure relief (if required by the detail specification) .34
4.17 Storage at high temperature .35
4.18 Storage at low temperature (for non-solid electrolyte capacitors only) .35
4.19 Characteristics at high and low temperature .35
4.20 Charge and discharge (if required by the detail specification).35
4.21 High surge current (for solid electrolyte capacitors only and if required by the
detail specification) .36
4.22 Voltage transient overload.36
60384-4 © IEC:2007(E) – 3 –
Table 1 – Fixed sample size test plan for qualification approval, assessment level EZ .13
Table 2 – Test schedule for qualification approval.14
Table 3 – Lot-by-lot inspection .25
Table 4 – Periodic inspection .25
Table 5 – Leakage current requirements .26
Table 6 – Amplitude and acceleration options .30
Table 7 – Preferred severities .31
– 4 – 60384-4 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 4: Sectional specification –
Aluminium electrolytic capacitors with solid (MnO )
and non-solid electrolyte
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.