Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte

IEC 60384-4:2016 applies to fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte primarily intended for d.c. applications for use in electronic equipment. It covers capacitors for long-life applications and capacitors for general-purpose applications. Capacitors for special-purpose applications may need additional requirements.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 4: Rahmenspezifikation – Aluminium-Elektrolyt-Kondensatoren mit festen (MnO2) und flüssigen Elektrolyten

Condensateurs fixes utilisés dans les équipements électroniques - Partie 4: Spécification intermédiaire - Condensateurs électrolytiques à l’aluminium, à électrolyte solide (MnO2) et non solide

L'IEC 60384-4:2016 s'applique aux condensateurs fixes électrolytiques à l'aluminium, à électrolyte solide (MnO2) et non solide, destinés principalement aux applications en courant continu dans des équipements électroniques. Elle couvre les condensateurs utilisés dans des applications de longue durée de vie et les condensateurs utilisés dans des applications d'usage général. Les condensateurs utilisés dans des applications d'usage spécial peuvent nécessiter des exigences supplémentaires.

Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 4. del: Področna specifikacija - Nespremenljivi aluminijski elektrolitski kondenzatorji s trdim (MnO2) in netrdim elektrolitom (IEC 60384-4:2016)

Ta del standarda IEC 60384 se uporablja za nespremenljive aluminijske elektrolitske kondenzatorje s trdim (MnO2) in
netrdim elektrolitom, ki so namenjeni predvsem načinom uporabe, povezanim z enosmernim tokom, v elektronski opremi. Zajema kondenzatorje z dolgo življenjsko dobo in kondenzatorje za splošno uporabo. Aluminijski elektrolitski kondenzatorji za površinsko montažo niso vključeni, vendar so zajeti v standardu IEC 60384-18.
Za kondenzatorje za uporabo za posebne namene so morda potrebne dodatne zahteve.

General Information

Status
Published
Publication Date
27-Oct-2016
Withdrawal Date
15-Sep-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
28-Oct-2016
Completion Date
28-Oct-2016

Relations

Buy Standard

Standard
EN 60384-4:2016
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60384-4:2016
01-december-2016
1DGRPHãþD
SIST EN 60384-4:2008
1HVSUHPHQOMLYLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO3RGURþQD
VSHFLILNDFLMD1HVSUHPHQOMLYLDOXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGLP 0Q2
LQQHWUGLPHOHNWUROLWRP ,(&
Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed
aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyt (IEC 60384-
4:2016)
Ta slovenski standard je istoveten z: EN 60384-4:2016
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
SIST EN 60384-4:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60384-4:2016

---------------------- Page: 2 ----------------------

SIST EN 60384-4:2016


EUROPEAN STANDARD EN 60384-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2016
ICS 31.060.50 Supersedes EN 60384-4:2007
English Version
Fixed capacitors for use in electronic equipment - Part 4:
Sectional specification - Fixed aluminium electrolytic capacitors
with solid (MnO ) and non-solid electrolyte
2
(IEC 60384-4:2016)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 4: Spécification intermédiaire - Elektronik - Teil 4: Rahmenspezifikation - Aluminium-
Condensateurs électrolytiques à l'aluminium, à électrolyte Elektrolyt-Kondensatoren mit festen (MnO ) und flüssigen
2
solide ( MnO ) et non solide Elektrolyten
2
(IEC 60384-4:2016) (IEC 60384-4:2016)
This European Standard was approved by CENELEC on 2016-09-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60384-4:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60384-4:2016
EN 60384-4:2016
European foreword
The text of document 40/2467/FDIS, future edition 5 of IEC 60384-4, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60384-4:2016.
The following dates are fixed:
(dop) 2017-06-16
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2019-09-16
the document have to be withdrawn

This document supersedes EN 60384-4:2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60384-4:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60384-18 NOTE Harmonized as EN 60384-18.

2

---------------------- Page: 4 ----------------------

SIST EN 60384-4:2016
EN 60384-4:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.