EN IEC 60384-26:2018

Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte

NEW!IEC 60384-26:2018 is available as IEC 60384-26:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60384-26:2018 applies to fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte primarily intended for d.c. applications for use in electronic equipment. Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte are covered by IEC 60384-4. Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte are covered by IEC 60384-25. The object of this document is to prescribe preferred ratings and characteristics and to select from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level, because lower performance levels are not permitted. This edition includes the following significant technical changes with respect to the previous edition: - revision of the structure in accordance with ISO/IEC Directives, Part 2:2016 to the extent practicable, and harmonization between other similar kinds of documents; - in addition, Clause 4 and all the tables have been reviewed in order to prevent duplications and contradictions.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 26: Rahmenspezifikation - Aluminium-Elektrolyt-Kondensatoren mit leitfähigem Polymerfestkörper-Elektrolyten

Condensateurs fixes utilisés dans les équipements électroniques - Partie 26: Spécification intermédiaire - Condensateurs fixes électrolytiques en aluminium à électrolyte solide en polymère conducteur

NEW!IEC 60384-26:2018 est disponible sous forme de IEC 60384-26:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 60384-26:2018 s’applique aux condensateurs fixes électrolytiques en aluminium à électrolyte solide en polymère conducteur destinés principalement aux applications en courant continu dans des équipements électroniques. Les condensateurs fixes électrolytiques en aluminium à électrolyte solide (MnO2) sont couverts par l'IEC 60384-4. Les condensateurs fixes électrolytiques en aluminium pour montage en surface à électrolyte solide en polymère conducteur sont couverts par l'IEC 60384-25. Le présent document a pour objet de prescrire des caractéristiques et des valeurs assignées préférentielles et de sélectionner en se référant à l'IEC 60384-1, les procédures d’assurance de la qualité appropriées, les essais et les méthodes de mesure et de donner les exigences de performances générales pour ce type de condensateur. Les sévérités et les exigences d'essai prescrites dans les spécifications particulières se rapportant à la présente spécification intermédiaire doivent présenter des niveaux de performances supérieurs ou égaux, parce que des niveaux de performance inférieurs ne sont pas autorisés. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - révision de la structure conformément aux directives ISO/IEC, Partie 2:2016, dans la mesure du possible, et harmonisation avec d'autres types de documents similaires; - en outre, l'Article 4 et tous les tableaux ont été révisés dans le but d'éviter les répétitions et les contradictions.

Fiksni kondenzatorji za elektronsko opremo - 26. del: Področna specifikacija - Fiksni aluminijski elektrolitski kondenzatorji s trdnim elektrolitom iz prevodnega polimera (IEC 60384-26:2018)

Ta del standarda IEC 60384 velja za fiksne aluminijske elektrolitske kondenzatorje s trdnim elektrolitom iz prevodnega polimera, ki so namenjeni predvsem za enosmerno uporabo v elektronski opremi.
Fiksni aluminijski elektrolitski kondenzatorji s trdnim (MnO2) elektrolitom so zajeti v standardu IEC 60384-4. Fiksni aluminijski elektrolitski kondenzatorji s trdnim elektrolitom za površinsko montažo so zajeti v standardu IEC 60384-25.

General Information

• Status: Published
• Publication Date: 16-Aug-2018
• Withdrawal Date: 20-Jun-2021
• ICS: 31.060.50 - Aluminium electrolytic capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 17-Aug-2018
• Completion Date: 17-Aug-2018
• Ref Project: SIST EN IEC 60384-26:2018 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-26:2018)

Relations

• Replaces: EN 60384-26:2010 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
• Effective Date: 07-Jun-2022
• Corrected By: EN IEC 60384-26:2018/AC:2020-05 - Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
• Effective Date: 05-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2018
1DGRPHãþD
SIST EN 60384-26:2010
)LNVQLNRQGHQ]DWRUML]DHOHNWURQVNRRSUHPRGHO3RGURþQDVSHFLILNDFLMD
)LNVQLDOXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGQLPHOHNWUROLWRPL]SUHYRGQHJD
SROLPHUD,(&
Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed
aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-
26:2018)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 26:
Rahmenspezifikation - Aluminium-Elektrolyt-Kondensatoren mit leitfähigem
Polymerfestkörper-Elektrolyten (IEC 60384-26:2018)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 26:
Spécification intermédiaire - Condensateurs fixes électrolytiques en aluminium à
electrolyte solide en polymère conducteur (IEC 60384-26:2018)
Ta slovenski standard je istoveten z: EN IEC 60384-26:2018
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60384-26

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2018
ICS 31.060.50 Supersedes EN 60384-26:2010
English Version
Fixed capacitors for use in electronic equipment -
Part 26: Sectional specification - Fixed aluminium electrolytic
capacitors with conductive polymer solid electrolyte
(IEC 60384-26:2018)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 26: Spécification intermédiaire - Elektronik - Teil 26: Rahmenspezifikation - Aluminium-
Condensateurs fixes électrolytiques en aluminium à Elektrolyt-Kondensatoren mit leitfähigem
électrolyte solide en polymère conducteur Polymerfestkörper-Elektrolyten
(IEC 60384-26:2018) (IEC 60384-26:2018)
This European Standard was approved by CENELEC on 2018-06-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60384-26:2018 E

European foreword
The text of document 40/2599/FDIS, future edition 2 of IEC 60384-26, prepared by
IEC/TC 40 "Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 60384-26:2018.

The following dates are fixed:
(dop) 2019-03-21
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-06-21
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60384-26:2010.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60384-26:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60384-4:2016 NOTE Harmonized as EN 60384-4:2016 (not modified).
IEC 60384-25:2015 NOTE Harmonized as EN 60384-25:2015 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60063 -  Preferred number series for resistors and EN 60063 -
capacitors
IEC 60068-1 2013 Environmental testing - EN 60068-1 2014
Part 1: General and guidance
IEC 60068-2-20 2008 Environmental testing - EN 60068-2-20 2008
Part 2-20: Tests - Test T: Test methods for
solderability and resistance to soldering
heat of devices with leads
IEC 60384-1 2016 Fixed capacitors for use in electronic EN 60384-1 2016
equipment -
Part 1: Generic specification
IEC 60417-DB -  Graphical symbols for use on equipment - -
IEC 61193-2 2007 Quality assessment systems - EN 61193-2 2007
Part 2: Selection and use of sampling
plans for inspection of electronic
components and packages
ISO 3 - Preferred numbers - Series of preferred - -
numbers
IEC 60384-26 ®
Edition 2.0 2018-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –

Part 26: Sectional specification – Fixed aluminium electrolytic capacitors with

conductive polymer solid electrolyte

Condensateurs fixes utilisés dans les équipements électroniques –

Partie 26: Spécification intermédiaire – Condensateurs fixes électrolytiques en

aluminium à électrolyte solide en polymère conducteur

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.50 ISBN 978-2-8322-5696-1

– 2 – IEC 60384-26:2018 © IEC 2018
CONTENTS
FOREWORD . 5
1 General . 7
1.1 Scope . 7
1.2 Object . 7
1.3 Normative references . 7
1.4 Information to be given in a detail specification . 8
1.4.1 General . 8
1.4.2 Outline drawings and dimensions . 8
1.4.3 Mounting . 8
1.4.4 Rating and characteristics . 8
1.4.5 Marking . 9
1.5 Terms and definitions . 9
1.6 Marking . 9
1.6.1 General . 9
1.6.2 Information for marking . 9
1.6.3 Marking on capacitors . 10
1.6.4 Marking on packaging . 10
2 Preferred ratings and characteristics . 10
2.1 Preferred characteristics . 10
2.2 Preferred values of ratings . 10
2.2.1 Nominal capacitance (C ) . 10
N
2.2.2 Tolerance on nominal capacitance . 10
2.2.3 Rated voltage (U ) . 10
R
2.2.4 Category voltage (U ). 11
C
2.2.5 Surge voltage . 11
2.2.6 Rated temperature . 11
3 Quality assessment procedures . 11
3.1 Primary stage of manufacture . 11
3.2 Structurally similar components . 11
3.3 Certified test records of released lots . 11
3.4 Qualification approval (QA) procedures . 11
3.4.1 General . 11
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 11
3.4.3 Tests . 12
3.5 Quality conformance inspection . 19
3.5.1 Formation of inspection lots . 19
3.5.2 The schedule . 20
3.5.3 Delayed delivery . 20
3.5.4 Assessment levels . 20
4 Test and measurement procedures . 21
4.1 Pre-conditioning (if required) . 21
4.2 Measuring conditions . 21
4.3 Visual examination and check of dimensions . 21
4.3.1 General . 21
4.3.2 Visual examination and check of dimensions . 21
4.3.3 Requirements . 22
4.4 Electrical tests . 22

IEC 60384-26:2018 © IEC 2018 – 3 –
4.4.1 Leakage current . 22
4.4.2 Capacitance . 22
4.4.3 Tangent of loss angle (tan δ) . 23
4.4.4 Equivalent series resistance (ESR) . 23
4.5 Robustness of terminations . 23
4.5.1 General . 23
4.5.2 Initial inspection. 23
4.5.3 Final inspections and requirements . 23
4.6 Resistance to soldering heat . 23
4.6.1 General . 23
4.6.2 Initi
...