EN 50288-2-2:2001

Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables

Supersedes EN 50168:1994 * Superseded by EN 50288-2-2:2003

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung - Teil 2-2: Rahmenspezifikation für geschirmte Kabel bis 100 MHz - Geräteanschlußkabel und Schaltkabel

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 2-2: Spécification intermédiaire pour les câbles blindés pour applications jusqu'à 100 MHz - Câbles de zone de travail et de brassage

Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables

General Information

• Status: Withdrawn
• Publication Date: 27-Feb-2001
• Withdrawal Date: 30-Sep-2002
• ICS: 33.120.20 - Wires and symmetrical cables
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: CLC/SC 46XC - Multicore, Multipair and Quad Data communication cables
• Parallel Committee: IEC/SC 46C - IEC_SC_46C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2006
• Completion Date: 01-Oct-2006
• Ref Project: SIST EN 50288-2-2:2002 - Multi-element metallic cables used in analogue and digital communication and control -- Part 2-2: Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables

Relations

• Replaces: EN 50168:1994 - Sectional specification for work area wiring cables with a common overall screen for use in digital communication
• Effective Date: 29-Jan-2023
• Replaced By: EN 50288-2-2:2003 - Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2002
1DGRPHãþD
SIST EN 50168:1996
Multi-element metallic cables used in analogue and digital communication and
control - Part 2-2: Sectional specification for screened cables characterized up to
100 MHz - Work area and patch cord cables
Multi-element metallic cables used in analogue and digital communication and control --
Part 2-2: Sectional specification for screened cables characterized up to 100 MHz - Work
area and patch cord cables
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung --
Teil 2-2: Rahmenspezifikation für geschirmte Kabel bis 100 MHz - Geräteanschlußkabel
und Schaltkabel
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques -- Partie 2-2: Spécification intermédiaire pour les
câbles blindés pour applications jusqu'à 100 MHz - Câbles de zone de travail et de
brassage
Ta slovenski standard je istoveten z: EN 50288-2-2:2001
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50288-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2001
ICS 33.120.20 Supersedes EN 50168:1994
English version
Multi-element metallic cables used in analogue and digital
communication and control
Part 2-2: Sectional specification for screened cables
characterized up to 100 MHz -
Work area and patch cord cables
Câbles métalliques à éléments multiples Mehradrige metallische Daten- und
utilisés pour les transmissions et les Kontrollkabel für analoge und digitale
commandes analogiques et numériques Übertragung
Partie 2-2: Spécification intermédiaire Teil 2-2: Rahmenspezifikation für
pour les câbles blindés pour applications geschirmte Kabel bis 100 MHz -
jusqu'à 100 MHz - Geräteanschlußkabel und Schaltkabel
Câbles de zone de travail et de brassage
This European Standard was approved by CENELEC on 1999-10-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50288-2-2:2001 E
Foreword
This draft European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data
communication cables, of Technical Committee CENELEC TC 46X, Communication cables. It is
submitted to the Unique Acceptance Procedure.
This European Standard supersedes EN 50168:1994.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-09-01
- latest date by which national standards
conflicting with the EN have to be withdrawn (dow) 2002-10-01
This part 2-2 is to be used in conjunction with EN 50288-1.

-3 - EN 50288-2-2:2001
Contents
1 Scope.4
2 Normative references .4
3 Definitions .4
4 Cable construction .4
4.1 Conductor.4
4.2 Insulation.4
4.3 Cabling elements.5
4.4 Identification of cabling elements .5
4.5 Screening of cabling elements .5
4.6 Cable make-up .5
4.7 Filling compound .5
4.8 Interstitial fillers.5
4.9 Screening of the cable core.5
4.10 Moisture barriers.5
4.11 Wrapping layers .5
4.12 Sheath.5
5 Tests and requirements for completed cables .6
5.1 Electrical tests .6
5.2 Mechanical tests.8
5.3 Environmental tests.8
5.4 Fire performance tests.8

1 Scope
This sectional specification covers cables, characterised up to 100 MHz, with an overall screen
intended for work area cables to connect a telecommunications outlet to the terminal equipment
and for patch cord cables to establish connections on a patch panel as defined in EN 50173.
Work area cables may also be used as patch cord cables in any distributor of a generic building
wiring system to interconnect with equipment or to cross-connect between cabling systems.
The electrical, mechanical, transmission and environmental performance characteristics of the
screened cables, related to their referen
...