Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications

This sectional specification covers screened cables, characterised from 1 MHz up to 1 000 MHz, to be used as work area cables to connect a telecommunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area and data centres cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect between cabling systems. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics and requirement of the cables when tested in accordance with the referenced test methods. This sectional specification should be read in conjunction with EN 50288-1, which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electric power supplies of public utility mains.

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Kommunikation - Teil 9-2: Rahmenspezifikation für geschirmte Kabel von 1 MHz bis 1 000 MHz für Geräteanschlusskabel, Schaltkabel und Anwendungen für Rechenzentren

Diese Rahmenspezifikation behandelt geschirmte Kabel von 1 MHz bis 1 000 MHz zur Verwendung als Geräte-anschlusskabel für den Anschluss von Endgeräten an informationstechnische Anschlüsse und als Schaltkabel zur Herstellung von Verbindungen an Rangierfeldern nach EN 50173. Geräteanschlusskabel und Kabel für Rechenzentren dürfen auch als Schaltkabel in jedem Verteiler einer anwendungsneutralen Kommunikations-kabelanlage zur Verbindung mit Geräten oder zur Verbindung zwischen Kommunikationskabelanlagen verwen-det werden. Diese Rahmenspezifikation beschreibt die elektrischen, mechanischen, übertragungstechnischen und umgebungsrelevanten Eigenschaften und Anforderungen für Kabel, die nach den angegebenen Referenz-prüfverfahren geprüft werden. Diese Rahmenspezifikation sollte zusammen mit EN 50288-1 angewendet werden, die die grundlegenden Anwendungsbestimmungen enthält. Die in dieser Rahmenspezifikation beschriebenen Kabel sind für den Betrieb mit Spannungen und Strömen vorgesehen, die üblicherweise in Kommunikationssystemen vorkommen. Diese Kabel sind nicht für die Verwendung in Verbindung mit niederohmigen Quellen vorgesehen, wie zum Beispiel Verteilungsnetzen zur elektrischen Energieversorgung.

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 9-2: Spécification intermédiaire pour les câbles écrantés caractérisés de 1 MHz à 1 000 MHz - Câbles de zone de travail, pour cordons de brassage, et pour centres de traitement de données

Večelementni kovinski kabli za analogne in digitalne komunikacije in krmiljenje - 9-2. del: Področna specifikacija za zaslonjene kable z lastnostmi od 1 MHz do 1000 MHz - Kabli za delovna območja in povezovalne vrvice

Ta področna specifikacija zajema zaslonjene kable, ki se lahko uporabljajo za pasovne širine od 1 MHz do 1 000 MHz kot kabli na delovnem območju za povezavo telekomunikacijske vtičnice s terminalsko opremo, ter za povezovalne vrvice za vzpostavljanje povezav na povezovalni plošči, kot je določeno v standardu EN 50173. Kabli delovnega območja in podatkovnih centrov se lahko uporabljajo tudi kot povezovalne vrvice v katerem koli razdelilniku generičnega stavbnega sistema ožičenja za povezavo z opremo ali navzkrižno povezavo med kabelskimi sistemi.
Ta področna specifikacija vsebuje električne, mehanske, prenosne in okoljske karakteristike delovanja ter zahtevo za kable pri preskušanju v skladu z navedenimi preskusnimi metodami.
Ta področna specifikacija naj bi se uporabljala skupaj s standardom EN 50288-1, ki vsebuje bistvene določbe za njeno uporabo.
Kabli, zajeti v tej področni specifikaciji, so namenjeni za delovanje pri napetostih in tokovih, ki so običajni v komunikacijskih sistemih. Ti kabli niso namenjeni za uporabo z viri z nizko impedanco, na primer z električnim napajanjem javnih omrežij.

General Information

Status
Published
Publication Date
03-Sep-2015
Withdrawal Date
02-Aug-2018
Current Stage
6060 - Document made available - Publishing
Start Date
04-Sep-2015
Due Date
20-Aug-2015
Completion Date
04-Sep-2015

Buy Standard

Standard
EN 50288-9-2:2016
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50288-9-2:2016
01-februar-2016
9HþHOHPHQWQLNRYLQVNLNDEOL]DDQDORJQHLQGLJLWDOQHNRPXQLNDFLMHLQNUPLOMHQMH
GHO3RGURþQDVSHFLILNDFLMD]D]DVORQMHQHNDEOH]ODVWQRVWPLRG0+]GR
0+].DEOL]DGHORYQDREPRþMDLQSRYH]RYDOQHYUYLFH
Multi-element metallic cables used in analogue and digital communication and control -
Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1
000 MHz - Work area, patch cord and data centre cables
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung --
Teil 9-2: Rahmenspezifikation für geschirmte Kabel von 1 MHz bis 1 000 MHz -
Geräteanschlusskabel, Schaltkabel und Kabel für Rechenzentren
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques -- Partie 9-2: Spécification intermédiaire pour les
câbles écrantés caractérisés de 1 MHz à 1 000 MHz - Câbles de zone de travail, pour
cordons de brassage, et pour centres de traitement de données
Ta slovenski standard je istoveten z: EN 50288-9-2:2015
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
SIST EN 50288-9-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50288-9-2:2016

---------------------- Page: 2 ----------------------

SIST EN 50288-9-2:2016

EUROPEAN STANDARD EN 50288-9-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2015
ICS 33.120.10; 33.120.20
English Version
Multi-element metallic cables used in analogue and digital
communication and control - Part 9-2: Sectional specification for
screened cables characterized from 1 MHz up to 1 000 MHz for
work area, patch cord and data centre applications
Câbles métalliques à éléments multiples utilisés pour les Mehradrige metallische Daten- und Kontrollkabel für
transmissions et les commandes analogiques et
analoge und digitale Kommunikation - Teil 9-2:
numériques - Partie 9-2: Spécification intermédiaire pour les Rahmenspezifikation für geschirmte Kabel von 1 MHz bis 1
câbles écrantés caractérisés de 1 MHz à 1 000 MHz - 000 MHz für Geräteanschlusskabel, Schaltkabel und
Câbles de zone de travail, pour cordons de brassage, et Anwendungen für Rechenzentren
pour centres de traitement de données
This European Standard was approved by CENELEC on 2015-08-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50288-9-2:2015 E

---------------------- Page: 3 ----------------------

SIST EN 50288-9-2:2016
EN 50288-9-2:2015
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions, symbols and abbreviations . 5
3.1 Terms and definitions . 5
3.2 Symbols and abbreviations . 5
4 C
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.