EN 61300-2-14:2013
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
IEC 61300-2-14:2012 describes a procedure for determining the suitability of a fibre optic interconnecting device or a passive component to withstand the exposure to optical power that may occur during operation. This third edition cancels and replaces the second edition published in 2005 and constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: fundamental change of the measurement method to introduce various measurement environments such as limited testing resources. Keywords: exposure to optical power
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-14: Prüfungen - Hohe Optische Leistung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée
La CEI 61300-2-14:2012 décrit une méthode en vue de déterminer l'aptitude d'un dispositif d'interconnexion ou d'un composant passif à fibres optiques à résister à l'exposition à une puissance optique susceptible d'apparaître au cours du fonctionnement. Cette troisième édition annule et remplace la deuxième édition publiée en 2005. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: un changement fondamental dans la méthode de mesure, pour introduire des environnements de mesure différents, par exemple des ressources d'essai limitées. Mots clés: exposition à une puissance optique
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-14. del: Preskusi - Optična moč (IEC 61300-2-14:2012)
V tem delu standarda IEC 61300 je opisan postopek za ugotavljanje primernosti optičnih spojnih elementov in pasivnih komponent za odpornost proti izpostavljenosti optični moči, ki se lahko pojavi med delovanjem.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Verbindungselemente und passive Bauteile; Grundlegende Prüf- und Meßverfahren - Teil 2-14: Prüfungen - Optische Leistung (IEC 61300-2-14:2012)Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée (CEI 61300-2-14:2012)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power (IEC 61300-2-14:2012)33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61300-2-14:2013SIST EN 61300-2-14:2013en01-april-2013SIST EN 61300-2-14:2013SLOVENSKI
STANDARDSIST EN 61300-2-14:20061DGRPHãþD
EUROPEAN STANDARD EN 61300-2-14 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-14:2013 E
ICS 33.180.20 Supersedes EN 61300-2-14:2006 + corr. Nov.2006
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-14: Tests -
High optical power (IEC 61300-2-14:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques -
Méthodes fondamentales d'essais et de mesures -
Partie 2-14: Essais -
Puissance optique élevée (CEI 61300-2-14:2012)
Lichtwellenleiter -
Verbindungselemente und passive Bauteile -
Grundlegende Prüf- und Messverfahren -
Teil 2-14: Prüfungen -
Hohe Optische Leistung (IEC 61300-2-14:2012)
This European Standard was approved by CENELEC on 2012-12-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Foreword The text of document 86B/3488/FDIS, future edition 3 of IEC 61300-2-14, prepared by SC 86B, "Fibre optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-14:2013.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-09-12 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2013-12-12
This document supersedes EN 61300-2-14:2006 + corrigendum November 2006. EN 61300-2-14:2013 includes the following significant technical changes with respect to EN 61300-2-14:2006: – fundamental change of the measurement method to introduce various measurement environments such as limited testing resources. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 61300-2-14:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300 series NOTE
Harmonized in EN 61300 series. IEC 61300-3-4 NOTE
Harmonized as EN 61300-3-4.
- 3 - EN 61300-2-14:2013
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60825-1 - Safety of laser products -
Part 1: Equipment classification and requirements EN 60825-1 -
IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 1: General and guidance EN 61300-1 -
IEC 61300-3-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-1: Examinations and measurements - Visual examination EN 61300-3-1 -
IEC 61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 -
IEC 61300-3-35
- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-35: Examinations and measurements - Fibre optic cylindrical connector endface visual and automated inspection EN 61300-3-35 -
IEC 61300-2-14 Edition 3.0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components – Basic test and measurement procedures –
Part 2-14: Tests – High optical power
Dispositifs d'interconnexion et composants passifs à fibres optiques – Méthodes fondamentales d’essais et de mesures –
Partie 2-14: Essais – Puissance optique élevée
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-83220-438-2
– 2 – 61300-2-14 © IEC:2012
CONTENTS
FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Apparatus . 5 3.1 Source (S) . 5 3.2 Optical detector (D) . 6 3.3 Environmental chamber . 6 3.4 Data acquisition system (DAS) . 6 3.5 Branching device (BD) . 6 3.6 Temporary joints (TJ) . 6 3.7 Safety devices . 6 3.8 Test set-up . 6 4 Procedure. 7 4.1 Preconditioning . 7 4.2 Initial examinations and measurements . 7 4.3 Conditioning . 8 4.4 Recovery . 8 4.5 Final examinations and measurements . 8 5 Severity . 8 5.1 General . 8 5.2 Optical power . 8 5.3 Wavelengths . 9 5.4 Temperature . 9 5.5 Humidity . 9 5.6 Exposure time . 9 6 Details to be specified . 9 Annex A (normative)
Examples of test set-up . 10 Annex B (informative)
Examples of pass/fail criteria during exposure time . 12 Bibliography . 14
Figure 1 – Optical power test set-up . 7 Figure A.1 – Optical power test set-up for WDM device . 10 Figure A.2 – Optical power test set-up in series connection . 11
61300-2-14 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-14: Tests – High optical power
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61300-2-14 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This third edition cancels and replaces the second edition published in 2005 and constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition:
– fundamental change of the mea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.