iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60051-1:2017

(Main)

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts

IEC 60051-1:2016 specifies definitions and general requirements for direct acting indicating analogue electrical measuring instruments and their accessories. This sixth edition cancels and replaces the fifth edition published in 1997. This edition constitutes a technical revision.

Direkt wirkend anzeigende analoge elektrische Messgeräte und ihr Zubehör - Teil 1: Definitionen und allgemeine Anforderungen für alle Teile

Appareils de mesure électriques indicateurs analogiques à action directe et leurs accessoires - Partie 1: Définitions et exigences générales communes à toutes les parties

L'IEC 60051-1:2016 spécifie les définitions et les exigences générales relatives aux appareils de mesure électriques indicateurs analogiques à action directe et leurs accessoires. Cette sixième édition annule et remplace la cinquième édition parue en 1997. Cette édition constitue une révision technique.

Neposredni kazalni analogni električni merilni instrumenti in njihov pribor - 1. del: Definicije in splošne zahteve, skupne vsem delom (IEC 60051-1:2016)

Ta del standarda IEC 60051 določa definicije in splošne zahteve za neposredne kazalne analogne električne merilne instrumente in njihov pribor.
Ta del se uporablja za neposredne kazalne analogne električne merilne instrumente, kot so:
• ampermetri in voltmetri;
• vatmetri in varmetri;
• merilniki frekvence z indikatorjem in vibrirajoči merilniki;
• merilniki faze, merilniki močnostnega faktorja in sinhroskopi;
• ohmmetri (merilniki impedance) in merilniki konduktance;
• večfunkcijski instrumenti zgoraj navedenih tipov.
Uporablja se tudi za:
• določen pribor, ki se uporablja s temi instrumenti, kot na primer:
– uporniki;
– zaporedni uporniki in impedančni elementi;
• kombinacije instrumentov in pribora, če so bile opravljene prilagoditve za to kombinacijo;
• neposredni kazalni električni merilni instrument, pri katerem oznake na skali ne ustrezajo neposredno vhodni električni količini, če je razmerje med njima znano;
• instrumente in pribor z elektronskimi napravami v merilnih in/ali pomožnih tokokrogih.
Te skupine standardov se ne uporabljajo za:
• instrumente za poseben namen, ki so zajeti v lastnih standardih IEC;
• naprave za poseben namen, ki so zajete v lastnih standardih IEC, kadar so uporabljene kot pribor.
Ta standard ne določa zahtev glede dimenzij instrumentov ali pribora (za prvo glej standard IEC 60473).

General Information

Status
Published
Publication Date
27-Apr-2017
ICS
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
CLC/TC 85X - Measuring equipment for electrical and electromagnetic quantities
Drafting Committee
IEC/TC 85 - IEC_TC_85
Current Stage
6060 - Document made available - Publishing
Start Date
28-Apr-2017
Completion Date
28-Apr-2017
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
Ref Project
SIST EN 60051-1:2017 - Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts (IEC 60051-1:2016)

Relations

Replaces
EN 60051-1:1998 - Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
Effective Date
25-Jan-2023

Buy Standard

EN 60051-1:2017EN 60051-1:2017
PreviousNext
Standard
EN 60051-1:2017
English language
60 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60051-1:2017
01-september-2017
1DGRPHãþD
SIST EN 60051-1:2000
1HSRVUHGQLND]DOQLDQDORJQLHOHNWULþQLPHULOQLLQVWUXPHQWLLQQMLKRYSULERUGHO
'HILQLFLMHLQVSORãQH]DKWHYHVNXSQHYVHPGHORP ,(&
Direct acting indicating analogue electrical measuring instruments and their accessories -
Part 1: Definitions and general requirements common to all parts (IEC 60051-1:2016)
Direkt anzeigende analoge elektrische Messgeräte und ihr Zubehör - Teil 1: Definitionen
und allgemeine Anforderungen für alle Teile (IEC 60051-1:2016)
$SSDUHLOVGHPHVXUHpOHFWULTXHVLQGLFDWHXUVDQDORJLTXHVjDFWLRQGLUHFWHHWOHXUV
DFFHVVRLUHV3DUWLH'pILQLWLRQVHWH[LJHQFHVJpQpUDOHVFRPPXQHVjWRXWHVOHVSDUWLHV
,(&
Ta slovenski standard je istoveten z: EN 60051-1:2017
ICS:
01.040.17 Meroslovje in merjenje. Metrology and measurement.
Fizikalni pojavi (Slovarji) Physical phenomena
(Vocabularies)
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 60051-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60051-1:2017

---------------------- Page: 2 ----------------------

SIST EN 60051-1:2017


EUROPEAN STANDARD EN 60051-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2017
ICS 17.220.20 Supersedes EN 60051-1:1998
English Version
Direct acting indicating analogue electrical measuring
instruments and their accessories - Part 1: Definitions and
general requirements common to all parts
(IEC 60051-1:2016)
Appareils de mesure électriques indicateurs analogiques à Direkt anzeigende analoge elektrische Messgeräte und ihr
action directe et leurs accessoires - Partie 1: Définitions et Zubehör - Teil 1: Definitionen und allgemeine
exigences générales communes à toutes les parties Anforderungen für alle Teile
(IEC 60051-1:2016) (IEC 60051-1:2016)
This European Standard was approved by CENELEC on 2016-03-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60051-1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 60051-1:2017
EN 60051-1:2017
European foreword
The text of document 85/521/FDIS, future edition 6 of IEC 60051-1, prepared by IEC/TC 85
"Measuring equipment for electrical and electromagnetic quantities" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 60051-1:2017.
The following dates are fixed:
(dop) 2017-10-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-04-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60051-1:1998.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 60051-1:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated :
IEC 60359:2001 NOTE Harmonized as EN 60359:2002.
IEC 61557-12:200
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61557-7:2022/A1:2023(Amendment)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
SIST EN IEC 61557-7:2022/A1:2024

2022-06-02: CLC/TC 85X made a decision to temporarily remove the link, meanwhile working on the harmonziation issue via another amendment togther with CLC/TC 65X

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-12:2022/A1:2022/AC:2022-09(Corrigendum)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD)
SIST EN IEC 61557-12:2022/A1:2022/AC:2022

IEC Corrected Version

  • Corrigendum
    4 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-12:2022/AC:2022-09(Corrigendum)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD)
SIST EN IEC 61557-12:2022/AC:2022

IEC Corrected Version

  • Corrigendum
    4 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-7:2022(Main)
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
SIST EN IEC 61557-7:2022

IEC 61557-7:2019 is available as IEC 61557-7:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61557-7:2019 specifies the requirements applicable to measuring equipment for testing the phase sequence in three-phase distribution systems. Indication of the phase sequence can be mechanical, visual and/or audible. This document does not apply to additional measurements for other quantities. It does not apply to monitoring relays. IEC 61557-7:2019 cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following changes with respect to the previous edition: a) alignment of the structure with that of the whole IEC 61557 series; b) updated requirements in 4.3 in accordance with new editions of IEC 61010-1 and IEC 61010-031; c) the information on markings was extended; d) the information on the operating instructions was extended; e) complement to the information on the testing of leads; f) test leads for insulated conductors were introduced; g) Annex B was added with information on phase sequence tests and indications.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-3:2022(Main)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
SIST EN IEC 61557-3:2022

IEC 61557-3:2019 is available as IEC 61557-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61557-3:2019 specifies the requirements applicable to equipment for measuring the loop impedance between a line conductor and protective conductor; between a line conductor and neutral; or between two line conductors by using the voltage drop when the circuit under test is loaded. IEC 61557-3:2019 cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of equirements as regards the measurement category; b) addition of new requirements for operating instructions; c) alignment of the structure with that of the whole IEC 61557 series.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60477-2:2022(Main)
Laboratory resistors - Part 2: Laboratory AC resistors
SIST EN IEC 60477-2:2022

This part of IEC 60477 applies to resistors intended as laboratory AC resistors for use over a range of frequencies from DC up to a stated frequency which is not in excess of 1 MHz. Such resistors are hereinafter referred to as "AC resistors". In addition to satisfying the requirements of IEC 60477, resistors satisfying the requirements of this standard are designed to have a small variation of resistance and a small phase displacement over the stated frequency range. Because of the uncertainties in AC properties which can result from stray inductances, stray capacitances, eddy currents, dielectric absorption effects and skin effect, the AC resistors to which this standard applies are classified according to their construction (see Annex D), as follows: a) Two-terminal resistor which each of one terminal both for current and potential; b) Three-terminal resistor which has one more shield terminal (also could be called as guard terminal) connected to the electric screen than the two-terminal resistor to reduce the stray capacitances effect; c) Four-terminal resistor which has independent current terminals and potential terminals to reduce the stray inductances and contact resistances; d) Five-terminal resistor which has one more shield terminal than the four-terminal resistor; e) Four-terminal coaxial resistor which has two terminal-pairs with the outer shield conductors working as the low terminal of current or potential; f) Two-terminal-pair resistor which has two terminal-pairs with the outer shield conductors working as the return path for the signal current (not grounded); g) Four-terminal-pair resistor which has four terminal-pairs with the outer shield conductors working as the return path for the signal current (not grounded) to eliminate the effect of mutual coupling between the current and potential leads.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60477-1:2022(Main)
Laboratory resistors - Part 1: Laboratory DC resistors
SIST EN IEC 60477-1:2022

IEC 60477-1:2022 applies to resistors intended for use as laboratory DC resistors (hereinafter referred to as "resistors") comprising standard resistors, single or multiple resistors of accuracy Classes 0,000 05 to 10 and single or multi-dial resistors of accuracy Classes 0,000 5 to 10. This document does not apply to: 1) resistors which are intended for use solely as permanently mounted circuit components, 2) resistors used on alternating current or on pulsed current, 3) active resistors, 4) series resistors and shunts which are considered as accessories of electrical measuring instruments in the relevant IEC document (examples of these are as follows). IEC 60477-1:2022 cancels and replaces the first edition of IEC 60477 published in 1974, and its Amendment 1:1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) extended the resistor accuracy classes; b) deleted the resistor accuracy class expression in parts per million (ppm); c) excluded the active resistor from the scope of this document; d) updated the terms and definitions according to new IEC 60050 series; e) changed the term "resistance decade" to "resistance dial" to cover the multi-dial resistors with other resistance step values; f) updated the intrinsic error to intrinsic uncertainty according to IEC 60359; g) added the limits of relative stability for resistors of classes 0,000 05 to 0,01; h) added the requirements of high voltage resistors; i) updated the safety symbols and requirements according to the new IEC 61010 series; j) updated the insulation resistance requirements of resistors; k) added the requirements of temperature coefficient; l) updated the temperature requirements for transport and storage of resistors.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-12:2022/A1:2022(Amendment)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD)
SIST EN IEC 61557-12:2022/A1:2022

This part of IEC 61557 specifies requirements for power metering and monitoring devices (PMD) that measure and monitor the electrical quantities within electrical distribution systems, and optionally other external signals. These requirements also defin the performance of PMD in single- and three-phace AC or DC systems having rated voltages up to 1000 V AC or up to 1500 V DC. These devices are fixed or portable. They are intended to be used indoors and/or outdoors. Power metering and monitoring devices (PMD), as defined in this document, give additional safety information, which aids the verification of the installation and enhances the performance of the distribution systems. Additionally, this document specifies requirements for measurement functions dedicated to metering and monitoring of electrical parameters called power metering and monitoring function (PMF) which can be embedded in equipment (EMPF) that is not classified as PMD and for which the main function is not power metering and monitoring. Requirements for power metering and monitoring function (PMF) and additional requirements for equipments embedding power metering and monitoring function (EPMF) are described in Annex H. The power metering and monitoring devices (PMD) for electrical parameters described in this document are used for general industrial and commercial applications. This document does not address functional safety and cyber security aspects. This document is not applicable to: - electricity metering equipment that complies with IEC 62053-21, IEC 62053-22, IEC 62053-23 and IEC 62053-24. Nevertheless, uncertainties defined in this document for active and reactive energy measurement are derived from those defined in IEC 62053 (all parts); - the measurement and monitoring of electrical parameters defined in IEC 61557-2 to IEC 61557-9 and IEC 61557-13 or in IEC 62020; - power quality instrument (PQI) according IEC 62586 (all parts); - devices covered by IEC 60051 (all parts) (direct acting analogue electrical measuring instrument). Note 1 Generally such types of devices are used in the following applications or for the following general needs: - energy management inside the installation, such as facilitating the implementation of documents such as ISO 50001 and IEC 60364-8-1; - monitoring and/or measurement of electrical parameters; - measurement and/or monitoring of the quality of energy inside commercial/industrial installations. Note 2 A measuring and monitoring device of electrical parameters usually consists of several functional modules. All or some of the functional modules are combined in one device. Examples of fuctnional modules are: - measurement and monitoring of several electrical parameters simultaneously; - energy measurement and/or monitoring, as well as sometimes compliance with aspects of building regulations; - alarms functions; - demand side quality (current and voltage harmonics, over/under voltages, voltage dips and swells, etc.). Note 3 PMD are historically called power meter, power monitor, power monitor device, power energy monitoring device, power analyser, multifunction meter, measuring multifunction equipment, energe meters. Note 4 Metering, measuring and monitoring applications are explained in Annex A.

  • Amendment
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-12:2022(Main)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD)
SIST EN IEC 61557-12:2022

IEC 61557-12:2018 is available as IEC 61557-12:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61557-12:2018 specifies requirements for power metering and monitoring devices (PMD) that measure and monitor the electrical quantities within electrical distribution systems, and optionally other external signals. These requirements also define the performance in single- and three-phase AC or DC systems having rated voltages up to 1 000 V AC or up to 1 500 V DC. These devices are fixed or portable. They are intended to be used indoors and/or outdoors. Power metering and monitoring devices (PMD), as defined in this document, give additional safety information, which aids the verification of the installation and enhances the performance of the distribution systems. The power metering and monitoring devices (PMD) for electrical parameters described in this document are used for general industrial and commercial applications. This document does not address functional safety and cyber security aspects. This document is not applicable for: – electricity metering equipment that complies with IEC 62053-21, IEC 62053-22, IEC 62053-23 and IEC 62053-24. Nevertheless, uncertainties defined in this document for active and reactive energy measurement are derived from those defined in IEC 62053 (all parts); – the measurement and monitoring of electrical parameters defined in IEC 61557-2 to IEC 61557-9 and IEC 61557-13 or in IEC 62020; – power quality instrument (PQI) according IEC 62586 (all parts); – devices covered by IEC 60051 (all parts) (direct acting analogue electrical measuring instrument). IEC 61557-12:2018 cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) PMD-A has been withdrawn due the fact these devices are now mainly covered by the IEC 62586 series of standards. b) Three categories of PMD have been created with a list of minimum required functions for each category. c) Added a new Annex A explaining the different applications linked to the relevant standards and devices, and another new Annex C about the power factor conventions.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61557-17:2021(Main)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 17: Non-contact AC voltage indicators
SIST EN IEC 61557-17:2022

This part of IEC 61557 defines minimum performance requirements for non-contact AC voltage indicators to reduce the risk of electric shock for the testing person and bystanders caused by the wrong interpretation of the indication. Products designed and manufactured in accordance with this document are for use by (electrically) skilled persons only. Non-contact AC voltage indicators are not designed for testing the absence of the operating voltage.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day