iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61300-2-7:1997

(Main)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment

Superseded by EN 61300-2-7:2013

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren - Teil 2-7: Prüfungen: Biegemoment

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-7: Essais - Moment de flexion

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment (IEC 61300-2-7:1995)

General Information

Status
Withdrawn
Publication Date
09-Jul-1997
Withdrawal Date
31-May-1998
ICS
33.180.20 - Fibre optic interconnecting devices
Technical Committee
CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
Drafting Committee
IEC/SC 86B - IEC_SC_86B
Parallel Committee
IEC/SC 86B - IEC_SC_86B
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Jun-2014
Completion Date
12-Jun-2014
Ref Project
SIST EN 61300-2-7:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-7: Tests - Bending moment

Relations

Replaced By
EN 61300-2-7:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment
Effective Date
29-Jan-2023

Buy Standard

EN 61300-2-7:1999EN 61300-2-7:1999
PreviousNext
Standard
EN 61300-2-7:1999
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-1999
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-7: Tests - Bending moment (IEC 61300-2-7:1995)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-7: Tests - Bending moment
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 2-7: Prüfungen: Biegemoment
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-7: Essais - Moment de flexion
Ta slovenski standard je istoveten z: EN 61300-2-7:1997
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61300-2-22:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
SIST EN IEC 61300-2-22:2024

IEC 61300-2-22:2024 describes a procedure to determine the suitability of a fibre optic interconnecting device and a passive component to withstand the effects of a change of temperature or a succession of changes of temperature.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61300-2-34:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
SIST EN IEC 61300-2-34:2024

IEC 61300-2-34:2024 is for testing the resistance to solvents and contaminating fluids on fibre optic interconnecting devices, passive components and protective housings, and their functionality.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61754-13:2024(Main)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 13: Type FC-PC connector family
SIST EN IEC 61754-13:2024

IEC 61754-13:2024 defines the standard interface dimensions for the type FC-PC family of connectors. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revising normative reference reflecting the latest documents; b) addition of intermateability in 5.2; c) changes of dimensions of the plug connector interface in Table 2 and Table 3; d) addition of Grade Am, Bm and Cm in Table 3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61300-2-27:2024(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow)
SIST EN IEC 61300-2-27:2024

IEC 61300-2-27:2024 determines the effects of dust on fibre optic interconnecting devices or passive components. This second edition cancels and replaces the first edition published in 1995. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) normative references have been added; b) the relative humidity requirement during the test has been modified; c) the procedure description has been modified; d) Figure 1 showing possible test configurations has been added; e) the severity of the test has been updated according to the component and performance category; f) Clause 8 has been added, listing details to be specified and reported.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61300-1:2022/A1:2024(Amendment)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
SIST EN IEC 61300-1:2022/A1:2024
  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61755-3-1:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-1: Connector parameters of dispersion unshifted single-mode physically contacting fibres - Non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules
SIST EN IEC 61755-3-1:2024

IEC 61755-3-1:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-1. Ferrules made from the material specified in this document are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) normative references have been added; b) the introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key". The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key"; c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and backwards compatible to IEC 61755-3-1:2006; d) The addition of Grade B and Grade C interface requirements for both variants; e) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability; f) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug; g) A new informative Annex C to give guidance related to the simulation of optical interface attenuation; h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60875-1:2024(Main)
Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
SIST EN IEC 60875-1:2024

IEC 60875-1:2024 is available as IEC 60875-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60875-1:2024 applies to non-wavelength-selective fibre optic branching devices, all exhibiting the following features: - they are passive, in that they contain no optoelectronic or other transducing elements; - they have three or more ports for either the entry or exit, or both, of optical power, and share optical power among these ports in a predetermined fashion; - the ports are optical fibres, or optical fibre connectors. This document establishes uniform requirements for the optical, mechanical and environmental properties. This seventh edition cancels and replaces the sixth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) removal of variant and reference extensions in clause classification b) removal of specification system in clause documentation c) removal of interface standards, reliability standards and interlinking in clause standardization system

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61755-3-2:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-2: Connector parameters of dispersion unshifted single-mode physically contacting fibres - Angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules
SIST EN IEC 61755-3-2:2024

IEC 61755-3-2:2024 defines the dimensional limits of the optical interface that are necessary for single-mode fibre optic connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules polished at an 8° angle to meet the specific requirements for fibre-to-fibre interconnection, as defined in IEC 61755-2-2. Ferrules made from the material specified in this standard are suitable for use in all the operating service environments defined in IEC 61753-1. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) normative references have been added; b) The introduction of an additional optical interface with a different fibre core eccentricity profile. The previous revision of optical interface standard is named "Variant 1: with fibre core axis oriented towards the connector guide key". The additional optical interface is named "Variant 2: with fibre core axis not oriented towards the connector guide key"; c) statements added related to interoperability, where both variants remain intermateable within a given performance grade and are fully backwards compatible to IEC 61755-3-2:2006; d) The addition of Grade B and Grade C interface requirements for both variants; f) The addition of a descriptive statistic for the mean fibre core eccentricity (mean value) to describe the distribution of fibre core eccentricity to ensure interoperability; g) A new informative Annex B to give guidance on the expected attenuation when mated to a reference connector plug; h) A new informative Annex D to give guidance related to estimation of mean fibre eccentricity limits for finite production batch sizes.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61753-071-02:2020/A1:2024(Amendment)
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
SIST EN IEC 61753-071-02:2021/A1:2024
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63267-2-1:2024(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-1: Connection parameters of physically contacting 50 µm core diameter fibres - Non-angled
SIST EN IEC 63267-2-1:2024

IEC 63267-2-1:2024 defines a set of specified conditions for an enhanced macro bend of 50/125 µm, graded index multimode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss performance in a randomly mated pair of polished physically contacting (PC) fibres. An encircled flux (EF) compliant launch condition in accordance with IEC 61300-1, at an operational wavelength of 850 nm, is used for determination of performance grades, based on lateral fibre core offset, numerical aperture (NA) mismatch, and fibre core diameter (CD) variation. Fibre core angular offset is considered insignificant given the state-of-the-art and is excluded as a factor for attenuation estimation. Attenuation and return loss performance grades are defined in IEC 63267-1.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day