EN 62453-309:2017
(Main)Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9
Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9
IEC 62453-309:2016 provides information for integrating the HART® technology into the FDT standard (IEC 62453-2). It specifies communication and other services. This second edition cancels and replaces the first edition published in 2009, and constitutes a technical revision. The main changes are provided in order to provide improved support for updates of the HART protocol (see 6.7 and the updated datatypes in Clauses 9, 10, and 12) and to support introduction of the technology according to IEC 62453-42. This publication is to be read in conjunction with IEC 62453-2:2009.
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 309: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309: Intégration des profils de communication - CPF 9 de l'IEC 61784
L'IEC 62453-309:2016 fournit des informations sur l'intégration de la technologie HART® dans la norme des outils des dispositifs de terrain (FDT) (IEC 62453-2). Elle spécifie les services de communication et autres services. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Les principales modifications sont apportées afin de fournir une prise en charge améliorée des mises à jour du protocole HART (voir 6.7 et les types de données mis à jour aux Articles 9, 10 et 12), et venir à l'appui de l'introduction de la technologie conformément à l'IEC 62453-42. Cette publication doit être lue conjointement avec la IEC 62453-2:2009.
Specifikacija vmesnika orodja procesne naprave - 309. del: Integracija komunikacijskih profilov - IEC 61784 CPF 9 (IEC 62453-309:2016)
Standard IEC 62453-309:2016 podaja informacije za integracijo tehnologije HART® v standard za orodje procesne naprave FDT (IEC 62453-2). Določa komunikacijo in druge storitve. Ta druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 2009, in predstavlja tehnično popravljeno izdajo. Glavne spremembe so navedene za izboljšanje podpore za posodobitve protokola HART (glej 6.7 in posodobljene vrste podatkov v točkah 9, 10 in 12) ter vpeljavo tehnologije v skladu s standardom IEC 62453-42.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2018
1DGRPHãþD
SIST EN 62453-309:2010
Specifikacija vmesnika orodja procesne naprave - 309. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 9 (IEC 62453-309:2016)
Field device tool (FDT) interface specification - Part 309: Communication profile
integration - IEC 61784 CPF 9 (IEC 62453-309:2016)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 309: Integration von
Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784 (IEC
62453-309:2016)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309:
Intégration des profils de communication - CPF 9 de l'IEC 61784 (IEC 62453-309:2016)
Ta slovenski standard je istoveten z: EN 62453-309:2017
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62453-309
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2017
ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-309:2009
English Version
Field device tool (FDT) interface specification - Part 309:
Communication profile integration - IEC 61784 CPF 9
(IEC 62453-309:2016)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 309: Intégration des profils de 309: Integration von Kommunikationsprofilen -
communication - CPF 9 de l'IEC 61784 Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784
(IEC 62453-309:2016) (IEC 62453-309:2016)
This European Standard was approved by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62453-309:2017 E
European foreword
The text of document 65E/336/CDV, future edition 1 of IEC 62453-309:2016, prepared by SC 65E
"Devices and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62453-309:2017.
The following dates are fixed:
• latest date by which this document has (dop) 2018-06-08
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-12-08
standards conflicting with this
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62453-309:2016 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-5-20 - Industrial communication networks - EN 61158-5-20 -
Fieldbus specifications - Part 5-20:
Application layer service definition - Type
20 elements
IEC 61158-6-20 - Industrial communication networks - EN 61158-6-20 -
Fieldbus specifications - Part 6-20:
Application layer protocol specification -
Type 20 elements
IEC 61784-1 - Industrial communication networks - EN 61784-1 -
Profiles -- Part 1: Fieldbus profiles
IEC 62453-1 - Field Device Tool (FDT) interface EN 62453-1 -
specification -- Part 1: Overwiew and
guidance
IEC 62453-2 - Field Device Tool (FDT) Interface EN 62453-2 -
Specification - Part 2: Concepts and
detailed Description
IEC 62453-309 ®
Edition 2.0 2016-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –
Part 309: Communication profile integration – IEC 61784 CPF 9
Spécification des interfaces des outils des dispositifs de terrain (FDT) –
Partie 309: Intégration des profils de communication – CPF 9 de l'IEC 61784
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-3464-8
– 2 – IEC 62453-309:2016 IEC 2016
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references. 8
3 Terms, definitions, symbols, abbreviated terms and conventions. 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 9
3.3 Conventions . 9
3.3.1 Data type names and references to data types . 9
3.3.2 Vocabulary for requirements . 9
3.3.3 Use of UML . 9
4 Bus category . 9
5 Access to instance and device data . 11
5.1 General . 11
5.2 Process Channel objects provided by DTM . 11
5.3 DTM services to access instance and device data . 12
6 Protocol-specific behavior . 12
6.1 Overview. 12
6.2 Burst mode subscription . 12
6.3 Usage of device addressing information . 13
6.4 Extended Command Numbers . 14
6.5 Handling of communication failures and time-outs . 14
6.6 Handling of Delayed Responses . 14
6.7 Topologies with mixed HART protocols . 16
6.7.1 General . 16
6.7.2 Behavior of DTMs supporting ‘Extended_HART’ only . 16
6.7.3 Behavior of DTMs supporting ‘Extended_HART’ and ‘HART’ . 16
6.7.4 Behavior of DTMs that requires ‘Extended_HART’ or ‘HART’ . 17
6.8 Nested communication with multiple gateways . 18
6.9 Communication- and network structures in WirelessHART . 18
6.9.1 General . 18
6.9.2 Network topology . 19
7 Protocol-specific usage of general data types . 21
8 Protocol-specific common data types . 22
9 Network management data types . 22
9.1 General . 22
9.2 Addressing modes . 22
9.3 Address information . 23
9.4 Additional address information for ‘Extended HART’ protocols . 23
10 Communication data types . 25
10.1 General . 25
10.2 Protocol-specific Addressing Information . 26
10.3 Datatype definitions . 26
11 Channel parameter data types . 30
12 Device identification . 33
IEC 62453-309:2016 IEC 2016 – 3 –
12.1 Protocol-specific handling of data type STRING . 33
12.2 Address Range for Scan . 33
12.3 Support for Extended Manufacturer and Device Type Code . 33
12.4 Device type identification data types for protocol ‘HART’ . 33
12.5 Common device type identification data types for ‘Extended_HART’
protocols . 37
12.6 Topology scan data types . 42
12.7 Scan identification data types for protocol ‘HART’ . 43
12.8 Scan identification data types for ‘Extended_HART’ protocols . 45
12.9 Device type identification data types – provided by DTM . 47
Bibliography . 49
Figure 1 – Part 309 of the IEC 62453 series . 7
Figure 2 – Burst mode subscription . 13
Figure 3 – Handling of Delayed Reponses (scenario 1) . 15
Figure 4 – Handling of Delayed Reponses (scenario 2) . 15
Figure 5 – Behavior of DTMs supporting ‘Extended_HART’ and ‘HART’ . 17
Figure 6 – Behavior of DTMs requires ‘Extended_HART’ or ‘HART’ . 18
Figure 7 – Host connected to a WirelessHART gateway device . 19
Figure 8 – FDT Topology of a WirelessHART network . 20
Figure 9 – Host connected to HART FSK .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.