Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9

Communication Profile Family 9 (commonly known as HART®1) defines communication profiles based on IEC 61158-5-20 and IEC 61158-6-20. The basic profile CP 9/1 is defined in IEC 61784-1. This part of IEC 62453 provides information for integrating the HART® technology into the FDT standard (IEC 62453-2). This part of the IEC 62453 specifies communication and other services. This standard neither contains the FDT specification nor modifies it.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 309: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309: Intégration des profils de communication - CPF 9 de l'IEC 61784

IEC 62453-309:2022 est disponible sous forme de IEC 62453-309:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. La Famille de Profils de Communication 9 (communément appelée HART® ) définit les profils de communication fondés sur l’IEC 61158 5 20 et l'IEC 61158 6 20. Le profil de base CP 9/1 est défini dans l’IEC 61784 1. La présente partie de l’IEC 62453 fournit des informations sur l'intégration de la technologie HART® dans la norme des outils des dispositifs de terrain (FDT) (IEC 62453-2). La présente partie de l’IEC 62453 spécifie les services de communication et autres services. Le présent document ne contient pas la spécification des outils FDT, ni ne la modifie.

Specifikacija vmesnika orodja procesne naprave - 309. del: Integracija komunikacijskih profilov - IEC 61784 CPF 9 (IEC 62453-309:2022)

General Information

Status
Published
Publication Date
13-Oct-2022
Current Stage
6060 - Document made available - Publishing
Start Date
14-Oct-2022
Completion Date
14-Oct-2022

Relations

Buy Standard

Standard
EN IEC 62453-309:2022 - BARVE
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2022
Nadomešča:
SIST EN 62453-309:2018
Specifikacija vmesnika orodja procesne naprave - 309. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 9 (IEC 62453-309:2022)
Field device tool (FDT) interface specification - Part 309: Communication profile
integration - IEC 61784 CPF 9 (IEC 62453-309:2022)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 309: Integration von
Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784 (IEC
62453-309:2022)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309:
Intégration des profils de communication - CPF 9 de l'IEC 61784
(IEC 62453-309:2022)
Ta slovenski standard je istoveten z: EN IEC 62453-309:2022
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62453-309

NORME EUROPÉENNE
EUROPÄISCHE NORM October 2022
ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-309:2017
English Version
Field device tool (FDT) interface specification - Part 309:
Communication profile integration - IEC 61784 CPF 9
(IEC 62453-309:2022)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 309: Intégration des profils de 309: Integration von Kommunikationsprofilen -
communication - CPF 9 de l'IEC 61784 Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784
(IEC 62453-309:2022) (IEC 62453-309:2022)
This European Standard was approved by CENELEC on 2022-10-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62453-309:2022 E

European foreword
The text of document 65E/907/FDIS, future edition 3 of IEC 62453-309, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-07-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-10-07
document have to be withdrawn
This document supersedes EN 62453-309:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62453-309:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC/TR 62453-42 NOTE Harmonized as CLC/TR IEC 62453-42
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-5-20 - Industrial communication networks - Fieldbus EN 61158-5-20 -
specifications - Part 5-20: Application layer
service definition - Type 20 elements
IEC 61158-6-20 - Industrial communication networks - Fieldbus EN 61158-6-20 -
specifications - Part 6-20: Application layer
protocol specification - Type 20 elements
IEC 61784-1 - Industrial communication networks - Profiles EN IEC 61784-1 -
Part 1: Fieldbus profiles
IEC 62453-1 - Field device tool (FDT) interface specification EN 62453-1 -
- Part 1: Overview and guidance
IEC 62453-2 - Field device tool (FDT) interface specification - -
- Part 2: Concepts and detailed description

IEC 62453-309 ®
Edition 3.0 2022-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device tool (FDT) interface specification –

Part 309: Communication profile integration – IEC 61784 CPF 9

Spécification des interfaces des outils des dispositifs de terrain (FDT) –

Partie 309: Intégration des profils de communication – CPF 9 de l'IEC 61784

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-5601-5

– 2 – IEC 62453-309:2022  IEC 2022
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviated terms and conventions . 9
3.1 Terms and definitions. 9
3.2 Abbreviated terms . 9
3.3 Conventions . 9
3.3.1 Data type names and references to data types . 9
3.3.2 Vocabulary for requirements . 9
3.3.3 Use of UML . 9
4 Bus category . 10
5 Access to instance and device data . 11
5.1 General . 11
5.2 Process Channel objects provided by DTM . 11
5.3 DTM services to access instance and device data . 12
6 Protocol-specific behavior . 12
6.1 Overview . 12
6.2 Burst mode subscription. 12
6.3 Usage of device addressing information . 13
6.4 Extended Command Numbers . 14
6.5 Handling of communication failures and time-outs. 14
6.6 Handling of delayed responses . 14
6.7 Topologies with mixed HART protocols . 16
6.7.1 General . 16
6.7.2 Behavior of DTMs supporting ‘Extended_HART’ only . 16
6.7.3 Behavior of DTMs supporting ‘Extended_HART’ and ‘HART_Basic’ . 17
6.7.4 Behavior of DTMs that require ‘Extended_HART’ or ‘HART_Basic’ . 17
6.8 Nested communication with multiple gateways . 18
6.9 Communication- and network structures in WirelessHART . 19
6.9.1 General . 19
6.9.2 Network topology . 19
7 Protocol-specific usage of general data types . 21
8 Protocol-specific common data types . 22
9 Network management data types . 22
9.1 General . 22
9.2 Addressing modes . 22
9.3 Address information . 23
9.4 Additional address information for ‘Extended HART’ protocols . 23
10 Communication data types . 25
10.1 General . 25
10.2 Protocol-specific Addressing Information . 26
10.3 Datatype definitions . 26
11 Channel parameter data types . 31
12 Device identification . 33

IEC 62453-309:2022  IEC 2022 – 3 –
12.1 Protocol-specific handling of data type STRING . 33
12.2 Address Range for Scan . 33
12.3 Support for Extended Manufacturer and Device Type Code . 34
12.4 Device type identification data types for protocol ‘HART_Basic’ . 34
12.5 Common device type identification data types for ‘Extended_HART’

protocols . 37
12.6 Topology scan data types . 41
12.7 Scan identification data types for protocol ‘HART_Basic’ . 42
12.8 Scan identification data types for ‘Extended_HART’ protocols . 44
12.9 Device type identification data types – provided by DTM . 46
Bibliography . 48

Figure 1 – Part 309 of the IEC 62453 series . 7
Figure 2 – Burst mode subscription . 13
Figure 3 – Handling of delayed responses (scenario 1) . 15
Figure 4 – Handling of delayed responses (scenario 2) . 16
Figure 5 – Behavior of DT
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.