EN 60317-0-8:2012
(Main)Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
IEC 60317-0-8:2012 specifies general requirements of polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire. Keywords: copper wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-8: Allgemeine Anforderungen - Flachdrähte aus Kupfer, blank oder lackisoliert, mit Polyesterglasgewebe umsponnen und mit Harz oder Lack imprägniert oder nicht imprägniert
Spécifications pour types particuliers de fils de bobinage - Partie 0-8: Exigences générales - Fil de section rectangulaire en cuivre nu ou émaillé, guipé de fibres de verre avec polyester, imprégnées ou non de vernis ou de résine
La CEI 60317-0-8:2012 spécifie les exigences générales pour le fil de section rectangulaire en cuivre nu ou émaillé guipé de fibres de verre avec polyester, imprégnées ou non de vernis ou de résine. Mots clé: fil de cuivre
Specifikacije za posebne vrste navijalnih žic - 0-8. del: Splošne zahteve - S poliestrskim steklenim vlaknom povita, s smolo ali posteklino impregnirana ali neimpregnirana, gola ali emajlirana pravokotna bakrena žica
Ta del standarda IEC 60317 določa splošne zahteve za bakreno žico, navito s poliestrski steklenimi vlakni, s smolo ali posteklino impregnirano ali neimpregnirano, golo ali emajlirano pravokotno bakreno žico. Obseg nazivnih dimenzij kondenzatorja je podan v ustrezni razpredelnici.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Specifikacije za posebne vrste navijalnih žic - 0-8. del: Splošne zahteve - S poliestrskim steklenim vlaknom povita, s smolo ali posteklino impregnirana ali neimpregnirana, gola ali emajlirana pravokotna bakrena žicaSpécifications pour types particuliers de fils de bobinage - Partie 0-8: Exigences générales - Fil de section rectangulaire en cuivre nu ou émaillé guipé de fibres de verre avec polyester, imprégnées ou non de vernis ou de résineSpecifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire29.060.10ŽiceWiresICS:Ta slovenski standard je istoveten z:EN 60317-0-8:2012SIST EN 60317-0-8:2012en01-december-2012SIST EN 60317-0-8:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60317-0-8 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-0-8:2012 E
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 0-8: General requirements -
Polyester glass fibre wound, resin or varnish impregnated
or not impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-8:2012)
Spécifications pour types particuliers
de fils de bobinage -
Partie 0-8: Exigences générales -
Fil de section rectangulaire en cuivre
nu ou émaillé, guipé de fibres de verre avec polyester, imprégnées ou non
de vernis ou de résine (CEI 60317-0-8:2012)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -
Teil-0-8: Allgemeine Anforderungen -
Flachdrähte aus Kupfer, blank oder lackisoliert, mit Polyesterglasgewebe umsponnen und mit Harz oder Lack imprägniert oder nicht imprägniert (IEC 60317-0-8:2012)
This European Standard was approved by CENELEC on 2012-08-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60317-0-8:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60264 Series NOTE Harmonised as EN 60264 Series (not modified). IEC 60317 Series NOTE Harmonised as EN 60317 Series (not modified). IEC 60851 Series NOTE Harmonised as EN 60851 Series (not modified).
- 3 - EN 60317-0-8:2012 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60851 Series Winding wires - Test methods EN 60851 Series
ISO 3 1973 Preferred numbers - Series of preferred numbers - -
IEC 60317-0-8 Edition 1.0 2012-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Specifications for particular types of winding wires –
Part 0-8: General requirements – Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
Spécifications pour types particuliers de fils de bobinage –
Partie 0-8: Exigences générales – Fil de section rectangulaire en cuivre nu ou émaillé, guipé de fibres de verre avec polyester, imprégnées ou non de vernis
ou de résine
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 29.060.10 PRICE CODE CODE PRIX ISBN 978-2-83220-187-9
– 2 – 60317-0-8 © IEC:2012 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and general notes on tests and appearance . 7 3.1 Terms and definitions . 7 3.2 General notes. 8 3.2.1 Methods of test . 8 3.2.2 Winding wire . 8 3.3 Appearance . 9 4 Dimensions . 9 4.1 Conductor dimensions . 9 4.2 Tolerance on conductor dimensions . 11 4.3 Rounding of corners . 11 4.4 Increase in dimensions due to the insulation . 11 4.5 Overall dimensions . 13 4.5.1 Nominal overall dimensions . 13 4.5.2 Minimum overall dimensions . 13 4.5.3 Maximum overall dimensions . 13 5 Electrical resistance . 13 6 Elongation . 13 7 Springiness . 13 8 Flexibility and adherence . 14 8.1 Mandrel winding test . 14 8.2 Adherence test . 14 8.2.1 Fibre covered bare wires . 14 8.2.2 Fibre covered enamelled wires . 14 9 Heat shock . 14 10 Cut-through . 14 11 Resistance to abrasion . 14 12 Resistance to solvents . 14 13 Breakdown voltage . 14 14 Continuity of insulation . 15 15 Temperature index . 15 16 Resistance to refrigerants . 15 17 Solderability . 15 18 Heat or solvent bonding . 15 19 Dielectric dissipation factor . 15 20 Resistance to transformer oil . 15 21 Loss of mass . 16 23 Pin hole test . 16 30 Packaging . 16 SIST EN 60317-0-8:2012
60317-0-8 © IEC:2012 – 3 –
Annex A (informative)
Nominal cross-sectional areas for preferred and intermediate sizes . 17 Bibliography . 24
Table 1 – Nominal cross-sectional areal of preferred sizes . 10 Table 2 – Conductor tolerances . 11 Table 3 – Corner radii . 11 Table 4 – Increase in dimensions . 12 Table 5 – Elongation . 13 Table 6 – Mandrel winding . 14 Table 7 – Breakdown voltage . 15 Table A.1 – Nominal cross-sectional areas (1 of 7) . 17
– 4 – 60317-0-8 © IEC:2012 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
SPECIFICATIONS FOR PARTICULAR
TYPES OF WINDING WIRES –
Part 0-8: General requirements –
Polyester glass fibre wound, resin or varnish impregnated
or not impregnated, bare or enamelled rectangular copper wire
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.