EN 50289-3-8:2001

Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings

This Part 3-8 of EN 50289 details the method of test to determine the abrasion resistance of cable sheath markings used in analogue and digital communication systems. It is to be read in conjunction with Part 3-1 of EN 50289, which contains essential provisions for its application. Depending on the kind of marking and as indicated in the relevant cable specification, one of the following two methods shall be used: - Method 1: suitable for rigid marking types like embossing, indenting and sintering; - Method 2: applicable to marking types other than embossing, indenting and sintering.

Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 3-8: Mechanische Prüfverfahren - Abriebfestigkeit der Markierung des Kabelmantels

Câbles de communication - Spécifications des méthodes d'essai - Partie 3-8: Méthodes d'essais mécaniques - Résistance à l'abrasion du marquage de la gaine

Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings

General Information

• Status: Withdrawn
• Publication Date: 26-Aug-2001
• Withdrawal Date: 31-Mar-2004
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: IEC/TC 46 - IEC_TC_46
• Parallel Committee: IEC/TC 46 - IEC_TC_46
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-Sep-2016
• Completion Date: 16-Sep-2016
• Mandate: M/212 - ICT - metallic and optical cables and cabling systems
• Ref Project: SIST EN 50289-3-8:2002 - Communication cables - Specifications for test methods -- Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings

Relations

• Replaced By: EN 50289-3-8:2013 - Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings
• Effective Date: 19-Feb-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2002
Communication cables - Specifications for test methods - Part 3-8: Mechanical test
methods - Abrasion resistance of cable sheath markings
Communication cables - Specifications for test methods -- Part 3-8: Mechanical test
methods - Abrasion resistance of cable sheath markings
Kommunikationskabel - Spezifikationen für Prüfverfahren -- Teil 3-8: Mechanische
Prüfverfahren - Abriebfestigkeit der Markierung des Kabelmantels
Câbles de communication - Spécifications des méthodes d'essai -- Partie 3-8: Méthodes
d'essais mécaniques - Résistance à l'abrasion du marquage de la gaine
Ta slovenski standard je istoveten z: EN 50289-3-8:2001
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50289-3-8
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2001
ICS 33.120.10
English version
Communication cables -
Specifications for test methods
Part 3-8: Mechanical test methods -
Abrasion resistance of cable sheath markings
Câbles de communication - Kommunikationskabel -
Spécifications des méthodes d'essai Spezifikationen für Prüfverfahren
Partie 3-8: Méthodes d'essais mécaniques Teil 3-8: Mechanische Prüfverfahren -
- Résistance à l'abrasion du marquage de Abriebfestigkeit der Markierung des
la gaine Kabelmantels
This European Standard was approved by CENELEC on 2001-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50289-3-8:2001 E
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 46X, Communication
cables.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50289-3-8
on 2001-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-04-01
This European Standard has been prepared under the European Mandate M/212 given to CENELEC by
the European Commission and the European Free Trade Association.

- 3 - EN 50289-3-8:2001
Contents
1 Scope . 4
2 Normative references. 4
3 Definitions . 4
4 Test methods. 4
4.1 Equipment . 4
4.1.1 Method 1 . 4
4.1.2 Method 2 .
...